Quick Dispatch Guide and Cross-References

TASK 05-50-00-040-002-A
Quick Dispatch Guide and Cross-References

1. Reason for the Job
To give quick access to maintenance tasks and data related to:
A. Aircraft Configuration before Maintenance
B. Deactivation/Reactivation
C. Aircraft Energization and Pressurization: Electrical, Hydraulic, Air
D. Access Doors
E. Missing Fasteners
F. Location of Antennas
G. Maintenance Procedures and Servicing: Hydraulic Fluid Filling, Accumulator Pressure, L/G, Engine, APU, IDG, Fuel, Oxygen, Lights, Potable Water, Waste, Parking, Storage, Cleaning, Cold Weather
H. Unscheduled Maintenance Checks and Inspections
J. Standard Practices: Airframe, Engine
K. Data loading
L. Materials: Airframe, Engine

NOTE: This deactivation task is not related to an AFM-CDL/MMEL item

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CHOCK - WHEEL(S)

B. Referenced Information

REFERENCE	DESIGNATION
TASK 05-50-00-790-001-A	Fluid Leak Measurement - Maintenance Practices
TASK 10-10-00-550-801-A	Parking and Storage Procedure
TASK 10-11-00-555-013-A	Installation of the Aircraft Protection Equipment
TASK 10-11-00-555-015-A	Procedure for the Installation of Wheel Chocks on Aircraft
TASK 12-11-28-650-003-A	Pressure Refuel with Automatic Control
TASK 12-11-28-650-004-A	Pressure Refuel with Manual Control
TASK 12-11-28-650-005-A	Pressure Refuel without Electrical Power
TASK 12-11-28-650-006-A	Overwing (Gravity) Refuel
TASK 12-12-29-611-001-A	Fill the Hydraulic Fluid Reservoir with a Hand Pump
TASK 12-12-29-611-002-A	Fill the Hydraulic Fluid Reservoir with a Hydraulic Service Cart
TASK 12-12-32-611-001-A	NLG Shock Absorber Oil Replenishment and Nitrogen Filling (Aircraft on Wheels)
TASK 12-12-32-611-004-A	Functional Check of MLG Shock Absorber Fluid Level
TASK 12-13-24-612-011-A	Integrated Drive Generator (IDG) Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check
TASK 12-13-24-612-041-B	Integrated Drive Generator (IDG) Servicing - Filling of the IDG with Oil or Addition of Oil after a level Check
TASK 12-13-24-612-041-A	Integrated Drive Generator (IDG) Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check
TASK 12-13-24-612-803-A	Integrated Drive Generator (IDG) Servicing - Filling of the IDG with Oil or Addition of Oil after a Level Check
TASK 12-13-49-612-001-A	Check APU Oil Level and Replenish
TASK 12-13-79-610-001-A	Check Oil Level and Replenish
TASK 12-13-79-610-001-A-01	Check Oil Level and Replenish (Pressure Filling)
TASK 12-13-79-610-002-A	Check oil level and replenish Check Pop Out Indicator of EMCD (Electrical Master Chip Detector)
TASK 12-13-79-610-002-A-01	Check oil level and replenish (Pressure Filling)
TASK 12-13-79-610-011-A	Check Oil Level and Replenish
TASK 12-13-79-612-803-A	Engine Oil Servicing
TASK 12-13-80-600-010-B	Replenishment of Starter Oil System
TASK 12-14-32-200-001-A	Inspection of the MLG Shock Absorbers before Flight
TASK 12-14-32-614-004-A	Check of the NLG Shock Absorber Charge-Pressure
TASK 12-15-38-613-001-A	Fill the Potable Water Tank System (Aircraft Electrical Power Available)
TASK 12-15-38-613-002-A	Fill the Potable Water Tank System (Aircraft Electrical Power not Available)
TASK 12-16-25-613-001-A	Servicing of the Liquid Soap Dispenser
TASK 12-16-38-613-001-A	Servicing of the Toilet System
TASK 12-21-11-615-002-A	External Cleaning
TASK 12-21-12-670-002-A	Disinsection of the Aircraft Equipment and Furnishings
TASK 12-21-12-670-004-A	Fumigation of the Fuselage Pressurized Areas with Carbon-Dioxide (CO2 Gas)
TASK 12-24-38-680-001-A	Draining of the Potable Water System (with Electrical Power)
TASK 12-24-38-680-002-A	Draining of the Potable Water System (without Electrical Power)
TASK 12-31-00-600-001-A	Cold-Weather Maintenance Procedures
TASK 12-32-28-281-001-A	Drain Water Content
TASK 12-34-24-869-002-A	Aircraft Grounding (Earthing) for the Maintenance Operations
TASK 12-34-24-869-002-A-01	Aircraft Grounding (Earthing) during Transit, Turnaround or Overnight Stop
TASK 20-23-11-917-002-A	Installation and Repair of Hydraulic Lines
TASK 20-28-00-912-802-A	Electrical Bonding - General Maintenance Procedure
TASK 22-70-00-610-006-A	Downloading of the FM Data
TASK 22-70-00-610-006-C	Downloading of the FM Data
TASK 22-70-00-610-006-D	Downloading of the FM Data
TASK 22-70-00-610-006-I	Downloading of the Flight Management (FM) BITE Data
TASK 22-70-00-610-008-A	Uploading of the Flight Management (FM) Data to the Flight Management and Guidance Computer (FMGC)
TASK 22-70-00-610-008-C	Uploading of the Flight Management (FM) Data to the Flight Management and Guidance Computer (FMGC)
TASK 22-70-00-610-008-C-01	Uploading of the Flight Management (FM) Data to the Flight Management and Guidance Computer (FMGC)
TASK 22-70-00-610-008-D	Uploading of the Flight Management (FM) Data to the Flight Management and Guidance Computer (FMGC)
TASK 22-70-00-610-008-H	Uploading of the Flight Management (FM) Data to the Flight Management and Guidance Computer (FMGC)
TASK 22-70-00-610-009-A	Crossloading of the Flight Management (FM) Data
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 25-54-12-300-001-A	Fasteners Missing from the Lining Panels of the Forward Cargo Compartment
TASK 25-55-11-300-001-A	Fasteners Missing from the Lining Panels of the Aft Cargo Compartment
TASK 25-55-12-300-001-A	Fasteners Missing from the Lining Panels of the Bulk Cargo Compartment
TASK 27-50-00-866-009-A	Retraction of the Flaps on the Ground
TASK 27-50-00-866-009-A-01	Retraction of the Flaps/Slats on the Ground
TASK 27-60-00-866-002-A	Extension-Retraction of the Spoilers for Maintenance
TASK 28-28-00-200-002-A	General Visual Inspection of the Integrated Impact Wall(s) and Pipework Protection Cover (If Installed)
TASK 29-00-00-864-001-A	Put the Related Hydraulic System in the Depressurized Configuration before Maintenance Action
TASK 29-00-00-910-004-A	General Rules for Removal and Installation Procedures in the Hydraulic Systems
TASK 29-10-00-200-001-A	Check Fluid Level on Reservoir Indicators
TASK 29-10-00-200-008-A	Check Nitrogen Charge Pressure on Hydraulic Power Accumulators
TASK 29-10-00-863-001-A	Pressurize the Green Hydraulic System with a Hydraulic Ground Power-Cart
TASK 29-10-00-863-002-A	Pressurize the Yellow Hydraulic System with a Hydraulic Ground Power-Cart
TASK 29-10-00-863-003-A-01	Pressurize the Blue Hydraulic System with the Blue Electric Pump
TASK 29-10-00-863-003-A	Pressurize the Blue Hydraulic System with a Hydraulic Ground Power-Cart
TASK 29-10-00-863-003-A-01	Pressurize the Blue Hydraulic System with the Blue Electric Pump
TASK 29-10-00-864-001-A	Depressurize the Green Hydraulic System
TASK 29-10-00-864-002-A	Depressurize the Yellow Hydraulic System
TASK 29-10-00-864-003-A	Depressurize the Blue Hydraulic System
TASK 29-10-00-864-004-A	Depressurize the Brake System
TASK 29-23-00-863-001-A	Pressurize the Green Hydraulic System from the Yellow Hydraulic System through the PTU with the Electric Pump
TASK 29-23-00-863-002-A	Pressurize the Yellow Hydraulic System from the Green Hydraulic System through the PTU with the Ground Service Cart
TASK 29-23-00-864-001-A	Depressurize the Green and Yellow Hydraulic Systems after Operation of the PTU
TASK 31-33-00-710-013-A	Flight Data Interface and Management Unit (FDIMU) DFDRS Software Load Procedure
TASK 31-33-00-710-013-B	Flight Data Interface and Management Unit (FDIMU) DFDRS Software Load Procedure with Portable Data Loader (PDL)
TASK 31-33-00-710-013-D	Flight Data Interface and Management Unit (FDIMU) DFDRS Software Load Procedure with Portable Data Loader (PDL)
TASK 31-33-00-710-013-E	Flight Data Interface and Management Unit (FDIMU) DFDRS Software Load Procedure with Portable Data Loader (PDL)
TASK 32-00-00-481-001-A	Installation of the Safety Devices on the Landing Gears
TASK 32-00-00-481-002-A	Installation of the Safety Devices on the Landing Gear Doors
TASK 32-12-00-010-001-A	Open the Main Gear Doors for Access
TASK 32-12-00-410-001-A	Close the Main Gear Doors after Access
TASK 32-22-00-010-001-A	Nose Gear Doors - Ground Doors Opening
TASK 32-41-00-210-002-A	Inspection/Check of the Wheels and Tires
TASK 32-42-27-210-001-A	Inspection/Check of the Brake with the Wheel Installed
TASK 32-42-27-210-006-A	Inspection/Check of the Brake with the Wheel Removed
TASK 32-44-11-200-001-A	Functional Check of Parking/Emergency Brake Accumulator by Reading the Charge Pressure on the Accumulator Gauge
TASK 33-51-00-710-001-A	Operational Check of Emergency Power Supply Units by BITE-Check
TASK 33-51-00-710-007-A	Operational Test of the Emergency Lighting in the Cabin with the 'LIGHT EMER' Pushbutton Switch
TASK 33-51-00-710-009-A	Check of all the Cabin Lights and Signs for Correct Illumination and Correct Installation
TASK 35-10-00-040-001-A	OXY High Pressure Indication-Direct Reading
TASK 36-12-00-860-002-A	Pressurization of the Bleed System through the HP Ground Connector
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 52-22-00-614-002-A	Charging of the Door Damper and Emergency Operation Cylinders at the Emergency Exit Doors
TASK 52-41-00-010-001-A	Open the APU Doors for Access
TASK 52-41-00-010-002-A	Open the Avionics Compartment Doors for Access
TASK 52-41-00-410-001-A	Close the APU Doors after Access
TASK 52-41-00-410-002-A	Close the Avionics Compartment Doors after Access
TASK 53-35-00-200-002-A	Inspection of the Wing-to-Fuselage Fairings and the Belly-Fairing Access Panels for Missing Fasteners
TASK 53-55-00-200-802-A	Inspection of the Vertical Stabilizer Fairings and Rudder Fairings for Missing Fasteners
TASK 54-50-00-200-003-A	Inspection for Missing Fasteners on the Pylon Fairing Panels
TASK 55-33-00-200-001-A	Inspection of the Vertical Stabilizer Trailing Edge Access-Panels for Missing Fasteners
TASK 70-00-00-910-802-A	Standard Practices - General
TASK 70-23-00-911-001-A	Tightening Torques
TASK 70-23-00-911-002-A	Tightening Torques
TASK 70-23-11-911-013-A	General Torque Tightening Techniques
TASK 70-24-00-910-806-A	PWA 315 - Standard Torque Recommendations
TASK 70-30-00-918-001-A	Consumable Products
TASK 70-30-00-918-002-A	Consumable Products
TASK 70-30-00-918-010-A	Consumable Materials Index
TASK 70-30-00-918-802-A	Consumable Materials Index for the Engine (Pratt & Whitney)
TASK 70-60-00-910-041-A	Nacelle Maintenance Practices
TASK 70-60-00-910-042-A	Nacelle Standard Practices
TASK 71-13-00-010-010-A	Opening of the Fan Cowls 437AL(447AL),438AR(448AR)
TASK 71-13-00-010-040-A	Opening of the Fan Cowl Doors
TASK 71-13-00-010-040-B	Opening of the Fan Cowl Doors
TASK 71-13-00-010-802-A	Opening of the Fan Cowl Doors
TASK 71-13-00-410-010-A	Closing of the Fan Cowls 437AL(447AL),438AR(448AR)
TASK 71-13-00-410-040-A	Closing of the Fan Cowl Doors
TASK 71-13-00-410-040-B	Closing of the Fan Cowl Doors
TASK 71-13-00-410-802-A	Closing of the Fan Cowl Doors
TASK 71-21-12-200-011-A	General Visual Check of the Forward Engine Mount
TASK 71-50-00-210-001-A	Visual Inspection of the Power Plant Wire Harness
TASK 71-50-00-210-040-A	Visual Inspection of the Power Plant Wire Harnesses
TASK 72-00-00-200-001-A	Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included)
TASK 72-00-00-200-006-A	Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included)
TASK 72-00-00-200-010-A	Inspection of the Engine after Bird Strike, Foreign Object or Slush Ingestion
TASK 72-00-00-210-807-A	Visual Examination (After Bird Strike (Foreign Object Damage))
TASK 78-10-00-200-012-A	Visually Examine the Mixed Exhaust System
TASK 78-11-11-210-040-A	Visual Inspection of the Core Exhaust Nozzle
TASK 78-11-11-210-041-A	Visual Inspection of the Core Nozzle
TASK 78-11-12-210-040-A	Visual Inspection of the Centerbody
TASK 78-11-12-210-042-A	Visual Inspection of the Centerbody
TASK 78-30-00-040-013-A	Deactivation of the Thrust Reverser System for Flight
TASK 78-30-00-040-805-A	Deactivation of the Thrust Reverser System for Ground Maintenance
TASK 78-30-00-481-041-A	Make the Thrust Reverser Unserviceable for Maintenance
TASK 78-30-00-481-041-B	Make the Thrust Reverser Unserviceable for Maintenance
TASK 78-31-00-210-041-A	General Visual Inspection of Primary Latch Mechanism (Blocker Doors Deployed)
TASK 78-31-00-210-041-B	General Visual Inspection of Primary Latch Mechanism (Blocker Doors Deployed)
TASK 78-32-00-010-010-A	Opening of the Thrust Reverser Halves
TASK 78-32-00-200-014-A	Detailed Inspection of Thrust Reverser Blocker Doors and Linkages for Condition and Security (Requires Partial Manual Deployment of Thrust Reverser)
TASK 78-32-00-410-010-A	Closing of the Thrust Reverser Halves
TASK 78-36-00-010-040-A	Opening of the Thrust Reverser Doors
TASK 78-36-00-010-040-B	Opening of the Thrust Reverser Doors
TASK 78-36-00-010-802-A	Opening of the Thrust Reverser Cowl-Doors
TASK 78-36-00-410-040-A	Closing of the Thrust Reverser Doors
TASK 78-36-00-410-040-B	Closing of the Thrust Reverser Doors
TASK 78-36-00-410-802-A	Closing of the Thrust Reverser Cowl-Doors
ESPM 2051000
ESPM 2053000
ESPM 2055000
SRM 545211283014
SRM 545211283022
TASK 12-21-12-03	INTERNAL CLEANING - SERVICING
Location of the Antennas, Probes, Sensors and Exterior Lights ** ON A/C NOT FOR ALL
Location of the Antennas, Probes, Sensors and Exterior Lights ** ON A/C NOT FOR ALL
Location of the Antennas, Probes, Sensors and Exterior Lights ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 05-50-00-860-056-A

A. Not Applicable

4. Procedure
Subtask 05-50-00-860-057-A ** ON A/C NOT FOR ALL

A. Aircraft Configuration before Maintenance

Put CHOCK - WHEEL(S) in position: (Ref. AMM TASK 10-11-00-555-015)
To make sure that the landing-gear safety devices are installed: (Ref. AMM TASK 32-00-00-481-001)
To make sure that the landing-gear doors safety devices are installed: (Ref. AMM TASK 32-00-00-481-002)
To install aircraft protection equipment: (Ref. AMM TASK 10-11-00-555-013)
To electrically ground the aircraft: (Ref. AMM TASK 12-34-24-869-002)
To make sure that the flaps and the slats are retracted: (Ref. AMM TASK 27-50-00-866-009)
To make sure that the spoilers are retracted: (Ref. AMM TASK 27-60-00-866-002)
To make sure that the thrust reversers are unserviceable: (Ref. AMM TASK 78-30-00-481-041).

Subtask 05-50-00-860-057-C ** ON A/C NOT FOR ALL

A. Aircraft Configuration before Maintenance

Put CHOCK - WHEEL(S) in position: (Ref. AMM TASK 10-11-00-555-015)
To make sure that the landing-gear safety devices are installed: (Ref. AMM TASK 32-00-00-481-001)
To make sure that the landing-gear doors safety devices are installed: (Ref. AMM TASK 32-00-00-481-002)
To install aircraft protection equipment: (Ref. AMM TASK 10-11-00-555-013)
To electrically ground the aircraft: (Ref. AMM TASK 12-34-24-869-002)
To make sure that the flaps and the slats are retracted: (Ref. AMM TASK 27-50-00-866-009)
To make sure that the spoilers are retracted: (Ref. AMM TASK 27-60-00-866-002)
To make sure that the thrust reversers are unserviceable: (Ref. AMM TASK 78-30-00-481-041)

Subtask 05-50-00-860-057-D ** ON A/C NOT FOR ALL

A. Aircraft Configuration before Maintenance

Put CHOCK - WHEEL(S) in position: (Ref. AMM TASK 10-11-00-555-015)
To make sure that the landing-gear safety devices are installed: (Ref. AMM TASK 32-00-00-481-001)
To make sure that the landing-gear doors safety devices are installed: (Ref. AMM TASK 32-00-00-481-002)
To install aircraft protection equipment: (Ref. AMM TASK 10-11-00-555-013)
To electrically ground the aircraft: (Ref. AMM TASK 12-34-24-869-002)
To make sure that the flaps and the slats are retracted: (Ref. AMM TASK 27-50-00-866-009)
To make sure that the spoilers are retracted: (Ref. AMM TASK 27-60-00-866-002)
To make sure that the thrust reversers are unserviceable: (Ref. AMM TASK 78-30-00-040-013)

Subtask 05-50-00-860-057-F ** ON A/C NOT FOR ALL

A. Aircraft Configuration before Maintenance

Put CHOCK - WHEEL(S) in position: (Ref. AMM TASK 10-11-00-555-015)
To make sure that the landing-gear safety devices are installed: (Ref. AMM TASK 32-00-00-481-001)
To make sure that the landing-gear door safety-devices are installed: (Ref. AMM TASK 32-00-00-481-002)
To install aircraft protection equipment: (Ref. AMM TASK 10-11-00-555-013)
To electrically ground the aircraft: (Ref. AMM TASK 12-34-24-869-002)
To make sure that the flaps and the slats are retracted: (Ref. AMM TASK 27-50-00-866-009)
To make sure that the spoilers are retracted: (Ref. AMM TASK 27-60-00-866-002)
To make sure that the thrust reversers are unserviceable: (Ref. AMM TASK 78-30-00-040-805).

Subtask 05-50-00-440-051-A

B. Deactivation/Reactivation
The Deactivation/Reactivation procedures come from the Master Minimum Equipment List (MMEL) and the Configuration Deviation List (CDL).
To find the related AMM procedures, refer to the MMEL or CDL.

Subtask 05-50-00-860-058-A

C. Aircraft Energization/Pressurization
(1) Electrical power supply

To energize the aircraft electrical circuits from the external power: (Ref. AMM TASK 24-41-00-861-002)
To energize the aircraft electrical circuits from the APU: (Ref. AMM TASK 24-41-00-861-002)
To de-energize the aircraft electrical circuits from the external power: (Ref. AMM TASK 24-41-00-862-002)
To de-energize the aircraft electrical circuits from the APU: (Ref. AMM TASK 24-41-00-862-002)

(2) Hydraulic power supply

To pressurize the Green hydraulic system: (Ref. AMM TASK 29-10-00-863-001) or (Ref. AMM TASK 29-23-00-863-001)
To pressurize the Yellow hydraulic system: (Ref. AMM TASK 29-10-00-863-002) or (Ref. AMM TASK 29-23-00-863-002)
To pressurize the Blue hydraulic system with a ground power supply: (Ref. AMM TASK 29-10-00-863-003)
To pressurize the Blue hydraulic system with the electric pump: (Ref. AMM TASK 29-10-00-863-003)
To depressurize the Green hydraulic system: (Ref. AMM TASK 29-10-00-864-001) or (Ref. AMM TASK 29-23-00-864-001)
To depressurize the Yellow hydraulic system: (Ref. AMM TASK 29-10-00-864-002) or (Ref. AMM TASK 29-23-00-864-001)
To depressurize the Blue hydraulic system: (Ref. AMM TASK 29-10-00-864-003)
To depressurize the brake system: (Ref. AMM TASK 29-10-00-864-004)
To put the related hydraulic system in depressurized configuration before maintenance: (Ref. AMM TASK 29-00-00-864-001)

(3) Air pressure supply

To pressurize the bleed system through the High Pressure (HP) ground connector: (Ref. AMM TASK 36-12-00-860-002)

Subtask 05-50-00-860-059-A ** ON A/C NOT FOR ALL

D. Access Doors

To open the passenger/crew door: (Ref. AMM TASK 52-10-00-010-001)
To close the passenger/crew door: (Ref. AMM TASK 52-10-00-410-001)
To open the avionics compartment doors: (Ref. AMM TASK 52-41-00-010-002)
To close the avionics compartment doors: (Ref. AMM TASK 52-41-00-410-002)
To open the Main Gear door: (Ref. AMM TASK 32-12-00-010-001)
To close the Main Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the Nose Gear door: (Ref. AMM TASK 32-22-00-010-001)
To close the Nose Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the APU doors: (Ref. AMM TASK 52-41-00-010-001)
To close the APU doors: (Ref. AMM TASK 52-41-00-410-001)
To open the fan cowl doors: (Ref. AMM TASK 71-13-00-010-040)
To close the fan cowl doors: (Ref. AMM TASK 71-13-00-410-040)
To open the thrust reverser doors: (Ref. AMM TASK 78-36-00-010-040)
To close the thrust reverser doors: (Ref. AMM TASK 78-36-00-410-040)

Subtask 05-50-00-210-052-A ** ON A/C NOT FOR ALL

E. Missing Fasteners
(1) To find the acceptance criteria related to missing fasteners on the fairings:

For the wing-to-fuselage fairings, the belly fairing access-panels and the belly-fairing louver-panel vanes: (Ref. AMM TASK 53-35-00-200-002)
For the pylon fairing panels: (Ref. AMM TASK 54-50-00-200-003)
For the vertical-stabilizer trailing-edge access-panels: (Ref. AMM TASK 55-33-00-200-001)
For the vertical stabilizer fairings and the rudder fairings: (Ref. AMM TASK 53-55-00-200-802).

(2) To find the acceptance criteria related to missing fasteners on the lining panels:

For the lower-deck forward cargo-compartment: (Ref. AMM TASK 25-54-12-300-001)
For the lower-deck aft cargo-compartment: (Ref. AMM TASK 25-55-11-300-001)
For the lower-deck bulk cargo-compartment: (Ref. AMM TASK 25-55-12-300-001)
For the additional-center-tank integrated impact-wall (if installed): (Ref. AMM D/O 28-28-00-20).

(3) To find the acceptance criteria related to missing fasteners on the engine components:

For the electrical wire harnesses: (Ref. AMM TASK 71-50-00-210-040)
For the thrust-reverser primary-latch mechanism (blocker doors deployed): (Ref. AMM TASK 78-31-00-210-041)
For the exhaust centerbody (missing rivets): (Ref. AMM TASK 78-11-12-210-040)
For the core nozzle (missing rivets): (Ref. AMM TASK 78-11-11-210-040).

Subtask 05-50-00-860-059-C ** ON A/C NOT FOR ALL

F. Access Doors

To open the passenger/crew door: (Ref. AMM TASK 52-10-00-010-001)
To close the passenger/crew door: (Ref. AMM TASK 52-10-00-410-001)
To open the avionics compartment doors: (Ref. AMM TASK 52-41-00-010-002)
To close the avionics compartment doors: (Ref. AMM TASK 52-41-00-410-002)
To open the Main Gear door: (Ref. AMM TASK 32-12-00-010-001)
To close the Main Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the Nose Gear door: (Ref. AMM TASK 32-22-00-010-001)
To close the Nose Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the APU doors: (Ref. AMM TASK 52-41-00-010-001)
To close the APU doors: (Ref. AMM TASK 52-41-00-410-001)
To open the fan cowl doors: (Ref. AMM TASK 71-13-00-010-040)
To close the fan cowl doors: (Ref. AMM TASK 71-13-00-410-040)
To open the thrust reverser doors: (Ref. AMM TASK 78-36-00-010-040)
To close the thrust reverser doors: (Ref. AMM TASK 78-36-00-410-040)

Subtask 05-50-00-210-052-D ** ON A/C NOT FOR ALL

G. Missing Fasteners
(1) To find the acceptance criteria related to missing fasteners on the fairings:

For the wing-to-fuselage fairings, the belly fairing access-panels and the belly-fairing louver-panel vanes: (Ref. AMM TASK 53-35-00-200-002)
For the pylon fairing panels: (Ref. AMM TASK 54-50-00-200-003)
For the vertical-stabilizer trailing-edge access-panels: (Ref. AMM TASK 55-33-00-200-001)
For the vertical stabilizer fairings and the rudder fairings: (Ref. AMM TASK 53-55-00-200-802).

(2) To find the acceptance criteria related to missing fasteners on the lining panels:

For the lower-deck forward cargo-compartment: (Ref. AMM TASK 25-54-12-300-001)
For the lower-deck aft cargo-compartment: (Ref. AMM TASK 25-55-11-300-001)
For the lower-deck bulk cargo-compartment: (Ref. AMM TASK 25-55-12-300-001)
For the additional-center-tank integrated impact-wall (if installed): (Ref. AMM TASK 28-28-00-200-002).

(3) To find the acceptance criteria related to missing fasteners on the engine components:

For the electrical wire harnesses: (Ref. AMM TASK 71-50-00-210-001)
For the thrust-reverser primary-latch mechanism (blocker doors deployed): (Ref. AMM TASK 78-31-00-210-041)
For the exhaust centerbody (missing rivets): (Ref. AMM TASK 78-11-12-210-042)
For the core nozzle (missing rivets): (Ref. AMM TASK 78-11-11-210-041).

Subtask 05-50-00-860-059-D ** ON A/C NOT FOR ALL

H. Access Doors

To open the passenger/crew door: (Ref. AMM TASK 52-10-00-010-001)
To close the passenger/crew door: (Ref. AMM TASK 52-10-00-410-001)
To open the avionics compartment doors: (Ref. AMM TASK 52-41-00-010-002)
To close the avionics compartment doors: (Ref. AMM TASK 52-41-00-410-002)
To open the Main Gear door: (Ref. AMM TASK 32-12-00-010-001)
To close the Main Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the Nose Gear door: (Ref. AMM TASK 32-22-00-010-001)
To close the Nose Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the APU doors: (Ref. AMM TASK 52-41-00-010-001)
To close the APU doors: (Ref. AMM TASK 52-41-00-410-001)
To open the fan cowl doors: (Ref. AMM TASK 71-13-00-010-010)
To close the fan cowl doors: (Ref. AMM TASK 71-13-00-410-010)
To open the thrust reverser doors: (Ref. AMM TASK 78-32-00-010-010)
To close the thrust reverser doors: (Ref. AMM TASK 78-32-00-410-010)

Subtask 05-50-00-210-052-B ** ON A/C NOT FOR ALL

I. Missing Fasteners
(1) To find the acceptance criteria related to missing fasteners on the fairings:

For the wing-to-fuselage fairings, the belly fairing access-panels and the belly-fairing louver-panel vanes: (Ref. AMM TASK 53-35-00-200-002)
For the pylon fairing panels: (Ref. AMM TASK 54-50-00-200-003)
For the vertical-stabilizer trailing-edge access-panels: (Ref. AMM TASK 55-33-00-200-001)
For the vertical stabilizer fairings and the rudder fairings: (Ref. AMM TASK 53-55-00-200-802).

(2) To find the acceptance criteria related to missing fasteners on the lining panels:

For the lower-deck forward cargo-compartment: (Ref. AMM TASK 25-54-12-300-001)
For the lower-deck aft cargo-compartment: (Ref. AMM TASK 25-55-11-300-001)
For the lower-deck bulk cargo-compartment: (Ref. AMM TASK 25-55-12-300-001)
For the additional-center-tank integrated impact-wall (if installed): (Ref. AMM D/O 28-28-00-20).

(3) To find the acceptance criteria related to missing fasteners on the engine components:

For the forward engine mount: (Ref. AMM TASK 71-21-12-200-011)
For the thrust-reverser blocker doors and linkages: (Ref. AMM TASK 78-32-00-200-014)
For the mixed exhaust system: (Ref. AMM TASK 78-10-00-200-012).

Subtask 05-50-00-860-059-F ** ON A/C NOT FOR ALL

J. Access Doors

To open the passenger/crew door: (Ref. AMM TASK 52-10-00-010-001)
To close the passenger/crew door: (Ref. AMM TASK 52-10-00-410-001)
To open the avionics compartment doors: (Ref. AMM TASK 52-41-00-010-002)
To close the avionics compartment doors: (Ref. AMM TASK 52-41-00-410-002)
To open the Main Gear door: (Ref. AMM TASK 32-12-00-010-001)
To close the Main Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the Nose Gear door: (Ref. AMM TASK 32-22-00-010-001)
To close the Nose Gear door: (Ref. AMM TASK 32-12-00-410-001)
To open the APU doors: (Ref. AMM TASK 52-41-00-010-001)
To close the APU doors: (Ref. AMM TASK 52-41-00-410-001)
To open the fan cowl doors: (Ref. AMM TASK 71-13-00-010-802)
To close the fan cowl doors: (Ref. AMM TASK 71-13-00-410-802)
To open the thrust reverser doors: (Ref. AMM TASK 78-36-00-010-802)
To close the thrust reverser doors: (Ref. AMM TASK 78-36-00-410-802).

Subtask 05-50-00-210-052-F ** ON A/C NOT FOR ALL

K. Missing Fasteners
(1) To find the acceptance criteria related to missing fasteners on the fairings:

For the wing-to-fuselage fairings, the belly fairing access-panels and the belly-fairing louver-panel vanes: (Ref. AMM TASK 53-35-00-200-002)
For the pylon fairing panels: SRM 545211283014 SRM 545211283022
For the vertical-stabilizer trailing-edge access-panels: (Ref. AMM TASK 55-33-00-200-001)
For the vertical stabilizer fairings and the rudder fairings: (Ref. AMM TASK 53-55-00-200-802).

(2) To find the acceptance criteria related to missing fasteners on the lining panels:

For the lower-deck forward cargo-compartment: (Ref. AMM TASK 25-54-12-300-001)
For the lower-deck aft cargo-compartment: (Ref. AMM TASK 25-55-11-300-001)
For the lower-deck bulk cargo-compartment: (Ref. AMM TASK 25-55-12-300-001)
For the additional-center-tank integrated impact-wall (if installed): (Ref. AMM TASK 28-28-00-200-002).

Subtask 05-50-00-860-060-A

L. Location of Antennas

Location of the Antennas, Probes, Sensors and Exterior Lights ** ON A/C NOT FOR ALL

Subtask 05-50-00-860-061-A ** ON A/C NOT FOR ALL

M. Maintenance Procedures and Servicing
(1) Filling of hydraulic fluid and check of the hydraulic fluid level

For filling of the hydraulic fluid reservoir with a hand pump (Ref. AMM TASK 12-12-29-611-001)
For filling of the hydraulic fluid reservoir with a hydraulic service cart (Ref. AMM TASK 12-12-29-611-002)
For check of the fluid level on the reservoir indicators (Ref. AMM TASK 29-10-00-200-001)
For general rules and main links to the hydraulic systems (Bleeding...) (Ref. AMM TASK 29-00-00-910-004).

(2) Accumulators and shock absorbers: nitrogen check and filling

For a nitrogen charge-pressure check on hydraulic power accumulators (Ref. AMM TASK 29-10-00-200-008)
For a nitrogen charge-pressure check on parking/emergency accumulators with the reading gage (Ref. AMM TASK 32-44-11-200-001).

(3) Landing gear and wheels: pressure check, inspection and the fluid level

For an inspection of the brakes with wheels (Ref. AMM TASK 32-42-27-210-001)
For an inspection of the brakes without wheels (Ref. AMM TASK 32-42-27-210-006)
For an inspection of the wheels and tires (Ref. AMM TASK 32-41-00-210-002)
For a check of the NLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-001)
For a check of the NLG shock-absorber charge pressure (Ref. AMM TASK 12-14-32-614-004)
For a check of the MLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-004)
For a check of the MLG shock-absorber before the flight (Ref. AMM TASK 12-14-32-200-001).

(4) Engine, Integrated Drive Generator (IDG) and APU oil level

For a check of the engine oil level and replenishing (Ref. AMM TASK 12-13-79-610-001)
For a check of the IDG oil level and replenishing (Ref. AMM TASK 12-13-24-612-041)
For a check of the APU oil level and replenishing (Ref. AMM TASK 12-13-49-612-001).

(5) Fuel: Refueling

For a pressure refueling with automatic control (Ref. AMM TASK 12-11-28-650-003)
For a pressure refueling with manual control (Ref. AMM TASK 12-11-28-650-004)
For a pressure refueling without electrical power (Ref. AMM TASK 12-11-28-650-005)
For an overwing refueling (if installed) (Ref. AMM TASK 12-11-28-650-006)
For draining of the tank water content (Ref. AMM TASK 12-32-28-281-001).

(6) Oxygen

For an inspection of the crew oxygen-cylinder pressure (Ref. AMM TASK 35-10-00-040-001).

(7) Lights: Tests

For a functional test of the emergency lights in the cabin with the LIGHT EMER pushbutton switch (Ref. AMM TASK 33-51-00-710-007)
For a functional test of the emergency lights in the cabin with the TEST EMER LIGHT SYS pushbutton switch (Ref. AMM TASK 33-51-00-710-001)
For a check of all cabin lights and signs (Ref. AMM TASK 33-51-00-710-009).

(8) Potable water and waste

For filling of the potable-water tank system with aircraft electrical power (Ref. AMM TASK 12-15-38-613-001)
For filling of the potable-water tank system without aircraft electrical power (Ref. AMM TASK 12-15-38-613-002)
For draining of the potable water system with electrical power (Ref. AMM TASK 12-24-38-680-001)
For draining of the potable water system without electrical power (Ref. AMM TASK 12-24-38-680-002)
For the servicing of the toilet system (Ref. AMM TASK 12-16-38-613-001)
For the servicing of the liquid soap dispenser (Ref. AMM TASK 12-16-25-613-001).

(9) Parking and storage

For parking or storage of the aircraft (Ref. AMM TASK 10-10-00-550-801).

(10) Cleaning

For external cleaning of the aircraft (Ref. AMM TASK 12-21-11-615-002)
For internal cleaning of the aircraft (Ref. AMM D/O 12-21-12-03)
For fumigation of the aircraft (Ref. AMM TASK 12-21-12-670-002) or (Ref. AMM TASK 12-21-12-670-004).

(11) Cold weather protection

For the cold weather procedures (Ref. AMM TASK 12-31-00-600-001).

Subtask 05-50-00-210-051-A ** ON A/C NOT FOR ALL

N. Unscheduled Maintenance Checks and Inspections

To find and measure all types of leaks: (Ref. AMM TASK 05-50-00-790-001)
To do an Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included) (Ref. AMM TASK 72-00-00-200-001).
To find all unscheduled maintenance inspections: AMM 05-51-XX-06

Subtask 05-50-00-910-051-A ** ON A/C NOT FOR ALL

O. Standard Practices
(1) Airframe and System

To find the standard procedures: AMM 20-20-00-00
To find the standard torques: AMM 20-21-XX-02
To find the installation and repair of tubings (Ref. AMM TASK 20-23-11-917-002)
To find the bonding procedures (Ref. AMM TASK 20-28-00-912-802)

(2) Engine

To find the wiring standard procedures: AMM 70-71-00-00
To find the standard torques: (Ref. AMM TASK 70-23-00-911-001)
To find the nacelle maintenance procedures: (Ref. AMM TASK 70-60-00-910-042)

(3) Electrical

To find the electrical standard procedures: ESPM 2051000
To find the electrical repair procedures: ESPM 2053000
To find the electrical cleaning procedures: ESPM 2055000

Subtask 05-50-00-860-061-C ** ON A/C NOT FOR ALL

P. Maintenance Procedures and Servicing
(1) Filling of hydraulic fluid and check of the hydraulic fluid level

For filling of the hydraulic fluid reservoir with a hand pump (Ref. AMM TASK 12-12-29-611-001)
For filling of the hydraulic fluid reservoir with a hydraulic service cart (Ref. AMM TASK 12-12-29-611-002)
For check of the fluid level on the reservoir indicators (Ref. AMM TASK 29-10-00-200-001)
For general rules and main links to hydraulic systems (Bleeding...) (Ref. AMM TASK 29-00-00-910-004).

(2) Accumulators and shock absorbers: nitrogen check and filling

For a nitrogen charge-pressure check on hydraulic power accumulators (Ref. AMM TASK 32-44-11-200-001)
For a nitrogen charge-pressure check on parking/emergency accumulators with the reading gage (Ref. AMM TASK 29-10-00-200-008)
For charging of the door damper and emergency operation cylinders at the emergency exit doors (if installed) (Ref. AMM TASK 52-22-00-614-002).

(3) Landing gear and wheels: pressure check, inspection and fluid level

For an inspection of the brakes with wheels (Ref. AMM TASK 32-42-27-210-001)
For an inspection of the brakes without wheels (Ref. AMM TASK 32-42-27-210-006)
For an inspection of the wheels and tires (Ref. AMM TASK 32-41-00-210-002)
For a check of the NLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-001)
For a check of the NLG shock-absorber charge pressure (Ref. AMM TASK 12-14-32-614-004)
For a check of the MLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-004)
For a check of the MLG shock-absorber before the flight (Ref. AMM TASK 12-14-32-200-001).

(4) Engine, Integrated Drive Generator (IDG) and APU oil level

For a check of the engine oil level and replenishing (Ref. AMM TASK 12-13-79-610-002)
For a check of the IDG oil level and replenishing (Ref. AMM TASK 12-13-24-612-041)
For a check of the APU oil level and replenishing (Ref. AMM TASK 12-13-49-612-001).

(5) Fuel: Refueling

For a pressure refueling with automatic control (Ref. AMM TASK 12-11-28-650-003)
For a pressure refueling with manual control (Ref. AMM TASK 12-11-28-650-004)
For a pressure refueling without electrical power (Ref. AMM TASK 12-11-28-650-005)
For an overwing refueling (if installed) (Ref. AMM TASK 12-11-28-650-006)
For draining of the tank water content (Ref. AMM TASK 12-32-28-281-001).

(6) Oxygen

For the filling of the passenger oxygen cylinder (if installed) (Ref. AMM D/O 35-21-00-61)
For an inspection of the crew oxygen-cylinder pressure (Ref. AMM TASK 35-10-00-040-001).

(7) Lights: Tests

For a functional test of the emergency lights in the cabin with the LIGHT EMER pushbutton switch (Ref. AMM TASK 33-51-00-710-007)
For a functional test of the emergency lights in the cabin with the TEST EMER LIGHT SYS pushbutton switch (Ref. AMM TASK 33-51-00-710-001)
For a check of all cabin lights and signs (Ref. AMM TASK 33-51-00-710-009).

(8) Potable water and waste

For filling of the potable-water tank system with aircraft electrical power (Ref. AMM TASK 12-15-38-613-001)
For filling of the potable-water tank system without aircraft electrical power (Ref. AMM TASK 12-15-38-613-002)
For draining of the potable water system with electrical power (Ref. AMM TASK 12-24-38-680-001)
For draining of the potable water system without electrical power (Ref. AMM TASK 12-24-38-680-002)
For the servicing of the toilet system (Ref. AMM TASK 12-16-38-613-001)
For the servicing of the liquid soap dispenser (if installed) (Ref. AMM TASK 12-16-25-613-001).

(9) Parking and storage

For parking or storage of the aircraft (Ref. AMM TASK 10-10-00-550-801).

(10) Cleaning

For external cleaning of the aircraft (Ref. AMM TASK 12-21-11-615-002)
For internal cleaning of the aircraft (Ref. AMM D/O 12-21-12-03)
For fumigation of the aircraft (Ref. AMM TASK 12-21-12-670-002) or (Ref. AMM TASK 12-21-12-670-004).

(11) Cold weather protection

For the cold weather procedures (Ref. AMM TASK 12-31-00-600-001).

Subtask 05-50-00-210-051-C ** ON A/C NOT FOR ALL

Q. Unscheduled Maintenance Checks and Inspections

To find and measure all types of leaks: (Ref. AMM TASK 05-50-00-790-001)
To do an Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included): (Ref. AMM TASK 72-00-00-200-006).
To find all unscheduled maintenance inspections: AMM 05-51-XX-06

Subtask 05-50-00-910-051-C ** ON A/C NOT FOR ALL

R. Standard Practices
(1) Airframe and System

To find the standard procedures: AMM 20-20-00-00
To find the standard torques: AMM 20-21-XX-02
To find the installation and repair of tubings (Ref. AMM TASK 20-23-11-917-002)
To find the bonding procedures (Ref. AMM TASK 20-28-00-912-802)

(2) Engine

To find the wiring standard procedures: AMM 70-71-00-00
To find the standard torques: (Ref. AMM TASK 70-23-00-911-002)
To find the nacelle maintenance procedures: (Ref. AMM TASK 70-60-00-910-041)

(3) Electrical

To find the electrical standard procedures: ESPM 2051000
To find the electrical repair procedures: ESPM 2053000
To find the electrical cleaning procedures: ESPM 2055000

Subtask 05-50-00-860-061-D ** ON A/C NOT FOR ALL

S. Maintenance Procedures and Servicing
(1) Filling of hydraulic fluid and check of the hydraulic fluid level

For filling of the hydraulic fluid reservoir with a hand pump (Ref. AMM TASK 12-12-29-611-001)
For filling of the hydraulic fluid reservoir with a hydraulic service cart (Ref. AMM TASK 12-12-29-611-002)
For check of the fluid level on the reservoir indicators (Ref. AMM TASK 29-10-00-200-001)
For general rules and main links to the hydraulic systems (Bleeding...) (Ref. AMM TASK 29-00-00-910-004).

(2) Accumulators and shock absorbers: nitrogen check and filling

For a nitrogen charge-pressure check on hydraulic power accumulators (Ref. AMM TASK 29-10-00-200-008)
For a nitrogen charge-pressure check on parking/emergency accumulators with the reading gage (Ref. AMM TASK 32-44-11-200-001)
For charging of the door damper and emergency operation cylinders at the emergency exit doors (if installed) (Ref. AMM TASK 52-22-00-614-002).

(3) Landing gear and wheels: pressure check, inspection and fluid level

For an inspection of the brakes with wheels (Ref. AMM TASK 32-42-27-210-001)
For an inspection of the brakes without wheels (Ref. AMM TASK 32-42-27-210-006)
For an inspection of the wheels and tires (Ref. AMM TASK 32-41-00-210-002)
For a check of the NLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-001)
For a check of the NLG shock-absorber charge pressure (Ref. AMM TASK 12-14-32-614-004)
For a check of the MLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-004)
For a check of the MLG shock-absorber before the flight (Ref. AMM TASK 12-14-32-200-001).

(4) Engine, Integrated Drive Generator (IDG) and APU oil level

For a check of the engine oil level and replenishing (Ref. AMM TASK 12-13-79-610-011)
For a check of the starter oil level (Ref. AMM TASK 12-13-80-600-010)
For a check of the IDG oil level and replenishing (Ref. AMM TASK 12-13-24-612-011)
For a check of the APU oil level and replenishing (Ref. AMM TASK 12-13-49-612-001).

(5) Fuel: Refueling

For a pressure refueling with automatic control (Ref. AMM TASK 12-11-28-650-003)
For a pressure refueling with manual control (Ref. AMM TASK 12-11-28-650-004)
For a pressure refueling without electrical power (Ref. AMM TASK 12-11-28-650-005)
For an overwing refueling (if installed) (Ref. AMM D/O 12-11-28-65)
For draining of the tank water content (Ref. AMM TASK 12-32-28-281-001).

(6) Oxygen

For the filling of the passenger oxygen cylinder (if installed) (Ref. AMM D/O 35-21-00-61)
For an inspection of the crew oxygen-cylinder pressure (Ref. AMM TASK 35-10-00-040-001).

(7) Lights: Tests

For a functional test of the emergency lights in the cabin with the LIGHT EMER pushbutton switch (Ref. AMM TASK 33-51-00-710-007)
For a functional test of the emergency lights in the cabin with the TEST EMER LIGHT SYS pushbutton switch (Ref. AMM TASK 33-51-00-710-001)
For a check of all cabin lights and signs (Ref. AMM TASK 33-51-00-710-009).

(8) Potable water and waste

For filling of the potable-water tank system with aircraft electrical power (Ref. AMM TASK 12-15-38-613-001)
For filling of the potable-water tank system without aircraft electrical power (Ref. AMM TASK 12-15-38-613-002)
For draining of the potable water system with electrical power (Ref. AMM TASK 12-24-38-680-001)
For draining of the potable water system without electrical power (Ref. AMM TASK 12-24-38-680-002)
For the servicing of the toilet system (Ref. AMM TASK 12-16-38-613-001)
For the servicing of the liquid soap dispenser (if installed) (Ref. AMM TASK 12-16-25-613-001).

(9) Parking and storage

For parking or storage of the aircraft (Ref. AMM TASK 10-10-00-550-801).

(10) Cleaning

For external cleaning of the aircraft (Ref. AMM TASK 12-21-11-615-002)
For internal cleaning of the aircraft (Ref. AMM D/O 12-21-12-03)
For fumigation of the aircraft (Ref. AMM TASK 12-21-12-670-002) or (Ref. AMM TASK 12-21-12-670-004).

(11) Cold weather protection

For the cold weather procedures (Ref. AMM TASK 12-31-00-600-001).

Subtask 05-50-00-210-051-D ** ON A/C NOT FOR ALL

T. Unscheduled Maintenance Checks and Inspections

To find and measure all types of leaks: (Ref. AMM TASK 05-50-00-790-001)
To do an Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included): (Ref. AMM TASK 72-00-00-200-010).
To find all unscheduled maintenance inspections: AMM 05-51-XX-06.

Subtask 05-50-00-910-051-D ** ON A/C NOT FOR ALL

U. Standard Practices
(1) Airframe and System

To find the standard procedures: AMM 20-20-00-00
To find the standard torques: AMM 20-21-XX-02
To find the installation and repair of tubings (Ref. AMM TASK 20-23-11-917-002)
To find the bonding procedures (Ref. AMM TASK 20-28-00-912-802)

(2) Engine

To find the wiring standard procedures (Ref. AMM D/O 70-78-00-91)
To find the standard torques procedures: (Ref. AMM TASK 70-23-11-911-013)
To find the engine standard practices: AMM 70-00-00-00 (IAE)

(3) Electrical Standard Practices

To find the electrical standard procedures: ESPM 2051000
To find the electrical repair procedures: ESPM 2053000
To find the electrical cleaning procedures: ESPM 2055000

Subtask 05-50-00-860-061-F ** ON A/C NOT FOR ALL

V. Maintenance Procedures and Servicing
(1) Filling of hydraulic fluid and check of the hydraulic fluid level

For filling of the hydraulic fluid reservoir with a hand pump (Ref. AMM TASK 12-12-29-611-001)
For filling of the hydraulic fluid reservoir with a hydraulic service cart (Ref. AMM TASK 12-12-29-611-002)
For check of the fluid level on the reservoir indicators (Ref. AMM TASK 29-10-00-200-001)
For general rules and main links to the hydraulic systems (Bleeding...) (Ref. AMM TASK 29-00-00-910-004).

(2) Accumulators and shock absorbers: nitrogen check and filling

For a nitrogen charge-pressure check on hydraulic power accumulators (Ref. AMM TASK 29-10-00-200-008)
For a nitrogen charge-pressure check on parking/emergency accumulators with a reading gage (Ref. AMM TASK 32-44-11-200-001).

(3) Landing gear and wheels: pressure check, inspection and fluid level

For an inspection of the brakes with wheels (Ref. AMM TASK 32-42-27-210-001)
For an inspection of the brakes without wheels (Ref. AMM TASK 32-42-27-210-006)
For an inspection of the wheels and tires (Ref. AMM TASK 32-41-00-210-002)
For a check of the NLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-001)
For a check of the NLG shock-absorber charge pressure (Ref. AMM TASK 12-14-32-614-004)
For a check of the MLG shock-absorber fluid level (Ref. AMM TASK 12-12-32-611-004)
For a check of the MLG shock absorber before the flight (Ref. AMM TASK 12-14-32-200-001).

(4) Engine, Integrated Drive Generator (IDG) and APU oil level

For a check of the engine oil level and replenishing (Ref. AMM TASK 12-13-79-612-803)
For a check of the IDG oil level and replenishing (Ref. AMM TASK 12-13-24-612-803)
For a check of the APU oil level and replenishing (Ref. AMM TASK 12-13-49-612-001).

(5) Fuel: Refueling

For a pressure refueling with automatic control (Ref. AMM TASK 12-11-28-650-003)
For a pressure refueling with manual control (Ref. AMM TASK 12-11-28-650-004)
For a pressure refueling without electrical power (Ref. AMM TASK 12-11-28-650-005)
For draining of the tank water content (Ref. AMM TASK 12-32-28-281-001).

(6) Oxygen

For an inspection of the crew oxygen-cylinder pressure (Ref. AMM TASK 35-10-00-040-001).

(7) Lights: Tests

For a functional test of the emergency lights in the cabin with the LIGHT EMER pushbutton switch (Ref. AMM TASK 33-51-00-710-007)
For a functional test of the emergency lights in the cabin with the TEST EMER LIGHT SYS pushbutton switch (Ref. AMM TASK 33-51-00-710-001)
For a check of all the cabin lights and signs (Ref. AMM TASK 33-51-00-710-009).

(8) Potable water and waste

For filling of the potable-water tank system with aircraft electrical power (Ref. AMM TASK 12-15-38-613-001)
For filling of the potable-water tank system without aircraft electrical power (Ref. AMM TASK 12-15-38-613-002)
For draining of the potable water system with electrical power (Ref. AMM TASK 12-24-38-680-001)
For draining of the potable water system without electrical power (Ref. AMM TASK 12-24-38-680-002)
For the servicing of the toilet system (Ref. AMM TASK 12-16-38-613-001)
For the servicing of the liquid soap dispenser (Ref. AMM TASK 12-16-25-613-001).

(9) Parking and storage

For parking or storage of the aircraft (Ref. AMM TASK 10-10-00-550-801).

(10) Cleaning

For external cleaning of the aircraft (Ref. AMM TASK 12-21-11-615-002)
For internal cleaning of the aircraft (Ref. AMM D/O 12-21-12-03)
For fumigation of the aircraft (Ref. AMM TASK 12-21-12-670-002) or (Ref. AMM TASK 12-21-12-670-004).

(11) Cold weather protection

For the cold weather procedures (Ref. AMM TASK 12-31-00-600-001).

Subtask 05-50-00-210-051-F ** ON A/C NOT FOR ALL

W. Unscheduled Maintenance Checks and Inspections

To find and measure all types of leaks: (Ref. AMM TASK 05-50-00-790-001)
To do an inspection of the engine after birdstrike (Foreign Object Damage): (Ref. AMM TASK 72-00-00-210-807)
To find all unscheduled maintenance inspections: AMM 05-51-XX-06.

Subtask 05-50-00-910-051-F ** ON A/C NOT FOR ALL

X. Standard Practices
(1) Airframe and System

To find the standard procedures: AMM 20-20-00-00
To find the standard torques: AMM 20-21-XX-02
To find the installation and repair of tubings (Ref. AMM TASK 20-23-11-917-002)
To find the bonding procedures (Ref. AMM TASK 20-28-00-912-802)

(2) Engine

To find the standard torques: (Ref. AMM TASK 70-24-00-910-806)
To find the nacelle maintenance procedures: (Ref. AMM TASK 70-00-00-910-802).

(3) Electrical

To find the electrical standard procedures: ESPM 2051000
To find the electrical repair procedures: ESPM 2053000
To find the electrical cleaning procedures: ESPM 2055000.

Subtask 05-50-00-730-051-A

Y. Data loading
(1) FM data loading

To upload the FM data: (Ref. AMM TASK 22-70-00-610-008)
To crossload FM data (If applicable): (Ref. AMM TASK 22-70-00-610-009)
To download FM data: (Ref. AMM TASK 22-70-00-610-006).

(2) Digital Flight Data Recording System (DFDRS) loading

To upload the Flight Data Interface and Management Unit (FDIMU) DFDRS software (If installed): (Ref. AMM TASK 31-33-00-710-013)
To upload the optical Quick Access Recorder (QAR) Software (If installed): (Ref. AMM D/O 31-33-00-71)
To upload the WGL-QAR Software (If installed): (Ref. AMM D/O 31-33-00-71).

Subtask 05-50-00-918-051-A ** ON A/C NOT FOR ALL

Z. Materials
(1) Airframe and systems

The list of consumable materials that are necessary for aircraft service and maintenance is given in the Consumable Material List (CML). For general information refer to AMM 20-31-00-00
To find the list of materials required for APU service and maintenance: AMM 20-33-00-00
To find the list of materials required for IDG service and maintenance: AMM 20-34-00-00

(2) Engine

To find the Consumable Material List: (Ref. AMM TASK 70-30-00-918-001)

Subtask 05-50-00-918-051-C ** ON A/C NOT FOR ALL

Z. Materials
(1) Airframe and systems

The list of consumable materials that are necessary for aircraft service and maintenance is given in the Consumable Material List (CML). For general information refer to AMM 20-31-00-00
To find the list of materials required for APU service and maintenance: AMM 20-33-00-00
To find the list of materials required for IDG service and maintenance: AMM 20-34-00- 00

(2) Engine

To find the Consumable Material List (Ref. AMM TASK 70-30-00-918-002)

Subtask 05-50-00-918-051-D ** ON A/C NOT FOR ALL

Z. Materials
(1) Airframe and System

The list of consumable materials that are necessary for aircraft service and maintenance is given in the Consumable Material List (CML). For general information refer to AMM 20-31-00-00
To find the list of materials required for APU service and maintenance: AMM 20-33-00-00
To find the list of materials required for IDG service and maintenance: AMM 20-34-00-00

(2) Engine

To find the Consumable Material List: (Ref. AMM TASK 70-30-00-918-010)

Subtask 05-50-00-918-051-F ** ON A/C NOT FOR ALL

Z. Materials
(1) Airframe and systems

The list of consumable materials that are necessary for aircraft service and maintenance is given in the Consumable Material List (CML). For general information refer to AMM 20-31-00-00
To find the list of materials that are necessary for APU service and maintenance: AMM 20-33-00-00
To find the list of materials that are necessary for IDG service and maintenance: AMM 20-34-00-00.

(2) Engine

To find the Consumable Material List: (Ref. AMM TASK 70-30-00-918-802).

[Rev.10 from 2021] 2026.03.31 22:51:15 UTC