General Visual Check of the Forward Engine Mount [IAE]

TASK 71-21-12-200-011-A
General Visual Check of the Forward Engine Mount

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT)
No specific	AR	LIGHT SOURCE - INSPECTION
No specific	AR	MIRROR - INSPECTION
No specific	AR	WARNING NOTICE(S)

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
FOR [1000EM1] (ENGINE-1)
437AL, 438AR, 451AL, 452AR
FOR [1000EM2] (ENGINE-2)
447AL, 448AR, 461AL, 462AR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 71-13-00-010-010-A	Opening of the Fan Cowls 437AL(447AL),438AR(448AR)
TASK 71-13-00-410-010-A	Closing of the Fan Cowls 437AL(447AL),438AR(448AR)
TASK 78-30-00-040-012-A	Deactivation of the Thrust Reverser Hydraulic Control Unit (HCU) for Ground Maintenance
TASK 78-30-00-440-012-A	Re-activation of the Thrust Reverser Hydraulic Control Unit (HCU) after Ground Maintenance
TASK 78-32-00-010-010-A	Opening of the Thrust Reverser Halves
TASK 78-32-00-410-010-A	Closing of the Thrust Reverser Halves
Forward Engine Mount

3. Job Set-up
Subtask 71-21-12-941-051-A ** ON A/C NOT FOR ALL

A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a WARNING NOTICE(S) to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a WARNING NOTICE(S) to tell persons not to energize the FADEC 1(2).

Subtask 71-21-12-010-052-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Open the fan cowls (Ref. AMM TASK 71-13-00-010-010):
(2) FOR [1000EM1] (ENGINE-1)
437AL 438AR
(3) FOR [1000EM2] (ENGINE-2)
447AL 448AR
(4) Put the ACCESS PLATFORM 2M (6 FT) in to position.

Subtask 71-21-12-040-051-A ** ON A/C NOT FOR ALL

C. Deactivate the thrust reverser hydraulic control unit (HCU). (Ref. AMM TASK 78-30-00-040-012).

Subtask 71-21-12-010-053-A ** ON A/C NOT FOR ALL

D. Open the thrust reverser halves. (Ref. AMM TASK 78-32-00-010-010):
(1) FOR [1000EM1] (ENGINE-1)
451AL 452AR
(2) FOR [1000EM2] (ENGINE-2)
461AL 462AR

4. Procedure
Subtask 71-21-12-210-051-A ** ON A/C NOT FOR ALL

A. Examine the forward engine mount

Forward Engine Mount ** ON A/C NOT FOR ALL

(1) Visually examine all of the anti-rotation and retainer plates for corrosion, any obvious damage and security of attachment. Reject any loose or missing fasteners or damaged parts. Use LIGHT SOURCE - INSPECTION and MIRROR - INSPECTION.
(2) Visually examine the forward engine mount to the pylon for security of attachment.
(3) Visually examine the right and left thrust links for security of attachment. Reject any loose or missing fasteners.
(4) Visually examine the mount hardware for cracks and other obvious damage. Reject any damaged parts.

5. Close-up
Subtask 71-21-12-410-052-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the thrust reverser halves. (Ref. AMM TASK 78-32-00-410-010):
(3) FOR [1000EM1] (ENGINE-1)
451AL 452AR
(4) FOR [1000EM2] (ENGINE-2)
461AL 462AR

Subtask 71-21-12-440-051-A ** ON A/C NOT FOR ALL

B. Activate the thrust reverser HCU (Ref. AMM TASK 78-30-00-440-012).

Subtask 71-21-12-410-053-A ** ON A/C NOT FOR ALL

C. Close Access
(1) Close the fan cowls. (Ref. AMM TASK 71-13-00-410-010):
(2) FOR [1000EM1] (ENGINE-1)
437AL 438AR
(3) FOR [1000EM2] (ENGINE-2)
447AL 448AR
(4) Remove the access platform(s).
(5) Remove the WARNING NOTICE(S).

[Rev.10 from 2021] 2026.04.01 03:56:11 UTC