Servicing of the Liquid Soap Dispenser

TASK 12-16-25-613-001-A
Servicing of the Liquid Soap Dispenser

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	FUNNEL

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.14SBA1)	Textile-Lint free Cotton -
No specific	liquid soap
No specific	weak liquid soap

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
Soap Dispenser ** ON A/C NOT FOR ALL
Soap Dispenser ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 12-16-25-861-050-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure

CAUTION: DO NOT USE INDUSTRIAL HAND CLEANERS, NATURAL SOAPS AND CLEANING AGENTS THAT CONTAIN ABRASIVES, SOLVENTS OR A LARGE PROPORTION OF DISINFECTANT. THESE MATERIALS CAN CAUSE THE PUMP MECHANISM TO WEAR MORE QUICKLY.

Subtask 12-16-25-613-050-A ** ON A/C NOT FOR ALL

A. Fill the Soap Dispenser

Soap Dispenser ** ON A/C NOT FOR ALL

(1) Turn the cover (2) counterclockwise to release it from the shank (3) (refer to Step 1).
(2) Carefully lift and remove the cover (2) together with the spout (1) and the tube (4) from the shank (3) (refer to Step 2).
(3) Fill the soap dispenser with liquid soap through the shank (3) (refer to Step 3).
(4) Carefully put the cover (2) together with the spout (1) and the tube (4) on the shank (3).
(5) Turn the cover (2) clockwise until it is locked in position on the shank (3).
(6) Make sure that the work area is clean and clear of tools and other items.

Subtask 12-16-25-613-050-H ** ON A/C NOT FOR ALL

A. Servicing of the Soap Dispenser

Soap Dispenser ** ON A/C NOT FOR ALL

NOTE: The dispenser is applicable for normal liquid hand-cleaning agents, soap creams and dish-washing agents for household use.
We recommend that you use mild, biodegradable, fully synthetic agents.

(1) Fill the bottle of the soap dispenser.
(a) Turn the pump assembly (1) counter-clockwise with your hand and remove it from the soap outlet (2).
(b) Use a FUNNEL and fill the bottle with weak liquid soap.
(c) Install the pump assembly (1) in the soap outlet (2) and tighten it with your hand.
(d) Operate the pump assembly (1) several times until soap comes out of the soap outlet (2).
(e) Remove the unwanted soap with a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) .
(f) Make sure that the work area is clean and clear of tools and other items.

5. Close-up
Subtask 12-16-25-862-050-A

A. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 22:56:04 UTC