DOC AIRBUS | AMM A320FStandard Practices - General [PW11]
TASK 70-00-00-910-802-A
Standard Practices - General
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 70-00-00-860-051-A ** ON A/C NOT FOR ALL
Subtask 70-00-00-910-052-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 03:57:25 UTC
Standard Practices - General
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 70-30-00-918-802-A | Consumable Materials Index for the Engine (Pratt & Whitney) |
| TASK 70-30-00-918-803-A | Consumable Materials Index for the Nacelle (UTC Aerospace Systems) |
Subtask 70-00-00-860-051-A ** ON A/C NOT FOR ALL
A. Not Applicable
4. ProcedureSubtask 70-00-00-910-052-A ** ON A/C NOT FOR ALL
A. General
(1) For information on the materials specified in this Standard Practices section, refer to the List of Materials (Consumable Materials) (Ref. AMM TASK 70-30-00-918-802) or (Ref. AMM TASK 70-30-00-918-803).
Subtask 70-00-00-910-053-A ** ON A/C NOT FOR ALL (1) For information on the materials specified in this Standard Practices section, refer to the List of Materials (Consumable Materials) (Ref. AMM TASK 70-30-00-918-802) or (Ref. AMM TASK 70-30-00-918-803).
B. Definitions
(1) WARNING: A WARNING tells the operator that injury or death is possible if the operator does not obey the specified instruction.
(a) WARNING statements that are applicable to an instruction will precede (come before) the instruction and all CAUTION statements that are also applicable to that instruction.
(b) WARNING statements that are applicable to an entire (full) procedure will follow the procedure title, and will precede all CAUTION or NOTE statements that are also applicable to the entire procedure.
(2) CAUTION: A CAUTION statement tells the operator that damage to the part, engine or equipment is possible if the operator does not obey the specified instruction.
(a) CAUTION statements that are applicable to an instruction will precede the instruction and will follow all WARNING statements that are also applicable to that instruction.
(b) CAUTION statements that are applicable to an entire procedure will follow the procedure title and all WARNING statements that are also applicable to the entire procedure, and will precede all NOTE statements that are also applicable to the entire procedure.
(3) NOTE: A NOTE statement gives explanations and added information (data) that help the operator to do the specified instruction.
(a) NOTE statements that are applicable to an instruction will follow the instruction.
(b) NOTE statements that are applicable to an entire procedure will follow the procedure title and all WARNING and CAUTION statements that are applicable to the entire procedure.
(c) In some procedures that are not new, it is possible that a NOTE statement will include instructions or dimensional limits (for example, feature controls). If a NOTE statement includes instructions or dimensional limits, then it is necessary to obey this information because it is necessary to complete the procedure.
(1) WARNING: A WARNING tells the operator that injury or death is possible if the operator does not obey the specified instruction.
(a) WARNING statements that are applicable to an instruction will precede (come before) the instruction and all CAUTION statements that are also applicable to that instruction.
(b) WARNING statements that are applicable to an entire (full) procedure will follow the procedure title, and will precede all CAUTION or NOTE statements that are also applicable to the entire procedure.
(2) CAUTION: A CAUTION statement tells the operator that damage to the part, engine or equipment is possible if the operator does not obey the specified instruction.
(a) CAUTION statements that are applicable to an instruction will precede the instruction and will follow all WARNING statements that are also applicable to that instruction.
(b) CAUTION statements that are applicable to an entire procedure will follow the procedure title and all WARNING statements that are also applicable to the entire procedure, and will precede all NOTE statements that are also applicable to the entire procedure.
(3) NOTE: A NOTE statement gives explanations and added information (data) that help the operator to do the specified instruction.
(a) NOTE statements that are applicable to an instruction will follow the instruction.
(b) NOTE statements that are applicable to an entire procedure will follow the procedure title and all WARNING and CAUTION statements that are applicable to the entire procedure.
(c) In some procedures that are not new, it is possible that a NOTE statement will include instructions or dimensional limits (for example, feature controls). If a NOTE statement includes instructions or dimensional limits, then it is necessary to obey this information because it is necessary to complete the procedure.