Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
TASK 24-92-00-100-012-A
Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200231-02
CLEANING OF EWIS INSTALLED IN THE FORWARD PASSENGER COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 24-92-00-010-105-A ** ON A/C NOT FOR ALL
Subtask 24-92-00-160-061-A ** ON A/C NOT FOR ALL
Subtask 24-92-00-410-103-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:27:10 UTC
Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200231-02
CLEANING OF EWIS INSTALLED IN THE FORWARD PASSENGER COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 231 | FWD PASSENGER COMPARTMENT |
| 232 | FWD PASSENGER COMPARTMENT |
| 231AX, 231BX, 231CX, 231DW, 231EW, 231FW, 231FX, 231GW, 231HW, 231JW, 231KW, 231LW, 231MW, 231NW, 231PW, 231PX, 231QW, 231QX, 231RW, 231RX, 231SW, 231SX, 231TW, 231TX, 231UW, 231UX, 231VW, 231VX, 231WW, 231WX, 231XX, 232AX, 232BX, 232CX, 232DW, 232EW, 232FW, 232FX, 232GW, 232HW, 232JW, 232KW, 232LW, 232MW, 232NW, 232PW, 232PX, 232QW, 232QX, 232RW, 232RX, 232SW, 232SX, 232TW, 232TX, 232UW, 232UX, 232VW, 232VX, 232WW, 232WX, 232XX |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 25-21-41-000-001-A | Removal of the Passenger Seats |
| TASK 25-21-41-400-001-A | Installation of the Passenger Seats |
| TASK 25-23-43-000-001-A | Removal of the Upper Sidewall Panel |
| TASK 25-23-43-400-001-A | Installation of the Upper Sidewall Panel |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
| TASK 25-23-44-400-001-A | Installation of the Lower Sidewall Panels (Dado Panels) |
| TASK 25-23-45-000-002-A | Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door |
| TASK 25-23-45-000-005-A | Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-006-A | Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-007-A | Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door |
| TASK 25-23-47-000-004-A | Removal of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 |
| TASK 25-23-47-000-009-A | Removal of the Door Frame Linings of the Right Forward Emergency Exit Door from Zone 232 |
| TASK 25-23-47-400-004-A | Installation of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231 |
| TASK 25-23-47-400-009-A | Installation of the Door Frame Linings of the Right Forward Emergency Exit Door in Zone 232 |
| TASK 25-23-48-000-001-A | Removal of the Cove Light Panel |
| TASK 25-23-48-400-001-A | Installation of the Cove Light Panel |
| TASK 25-27-44-000-002-A | Removal of the Forward Stowage |
| TASK 25-27-44-400-002-A | Installation of the Forward Stowage |
| TASK 25-31-44-000-001-A | Removal of the Forward Galley Unit |
| TASK 25-31-44-400-001-A | Installation of the Forward Galley Unit |
| TASK 25-41-41-000-001-A | Removal of Lavatory A |
| TASK 25-41-41-000-001-B | Removal of Lavatory A |
| TASK 25-41-41-400-001-A | Installation of Lavatory A |
| TASK 25-41-41-400-001-B | Installation of Lavatory A |
| TASK 52-10-00-010-001-A | Opening of the Passenger/Crew Door |
| TASK 52-10-00-410-001-A | Closing of the Passenger/Crew Door |
| ESPM 2055000 | |
Subtask 24-92-00-010-105-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below passenger/crew door 831(841).
(2) Open forward passenger/crew door 831(841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in zones 231 and 232:
(a) If the lavatories are installed, remove them (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) If the stowages are installed, remove them (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM D/O 25-27-44-00).
(c) If the galleys are installed, remove them (Ref. AMM D/O 25-31-41-00), (Ref. AMM D/O 25-31-41-00), (Ref. AMM D/O 25-31-45-00), (Ref. AMM D/O 25-31-43-00), (Ref. AMM TASK 25-31-44-000-001) or (Ref. AMM D/O 25-31-46-00).
(d) If the passenger seats are installed, remove them (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings from the left and right-forward passenger/crew doors at frame 20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the door frame linings from the left and right-forward emergency exit-doors (Ref. AMM TASK 25-23-47-000-004) and (Ref. AMM TASK 25-23-47-000-009).
(6) Remove the linings in zones 231 and 232:
(a) Remove these upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
Subtask 24-92-00-862-093-A ** ON A/C NOT FOR ALL 4. Procedure(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below passenger/crew door 831(841).
(2) Open forward passenger/crew door 831(841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in zones 231 and 232:
(a) If the lavatories are installed, remove them (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) If the stowages are installed, remove them (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM D/O 25-27-44-00).
(c) If the galleys are installed, remove them (Ref. AMM D/O 25-31-41-00), (Ref. AMM D/O 25-31-41-00), (Ref. AMM D/O 25-31-45-00), (Ref. AMM D/O 25-31-43-00), (Ref. AMM TASK 25-31-44-000-001) or (Ref. AMM D/O 25-31-46-00).
(d) If the passenger seats are installed, remove them (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings from the left and right-forward passenger/crew doors at frame 20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the door frame linings from the left and right-forward emergency exit-doors (Ref. AMM TASK 25-23-47-000-004) and (Ref. AMM TASK 25-23-47-000-009).
(6) Remove the linings in zones 231 and 232:
(a) Remove these upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
- 231EW, 231HW, 231LW, 231PW, 231SW, 231VW, 231BX, 231QX, 231TX and 231WX
- 232EW, 232HW, 232LW, 232PW, 232SW, 232VW, 232BX, 232QX, 232TX and 232WX.
- 231DW, 231GW, 231KW, 231NW, 231RW, 231UW, 231AX, 231PX, 231SX and 231VX
- 232DW, 232GW, 232KW, 232NW, 232RW, 232UW, 232AX, 232PX, 232SX and 232VX.
Subtask 24-92-00-160-061-A ** ON A/C NOT FOR ALL
A. Cleaning of All Wiring Installed in the Forward Passenger Compartment (Only Contaminated Wiring)
(1) Clean the wiring if there is dust or lint contamination ESPM 2055000.
(a) On the flight control routes: 7S, 8S and 7M.
(b) On the engine control routes: 1S and 2S.
(c) On the generator excitation routes: 3E and 6E.
(d) On other routes: 1M and 2M.
(e) On the coaxial wiring routes: 1T, 3T, 7T, 8T, 9T and 1U.
5. Close-up(1) Clean the wiring if there is dust or lint contamination ESPM 2055000.
(a) On the flight control routes: 7S, 8S and 7M.
(b) On the engine control routes: 1S and 2S.
(c) On the generator excitation routes: 3E and 6E.
(d) On other routes: 1M and 2M.
(e) On the coaxial wiring routes: 1T, 3T, 7T, 8T, 9T and 1U.
Subtask 24-92-00-410-103-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings at zones 231 and 232:
(a) Install these upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
(4) Install the door frame linings on the left and right-forward emergency exit-doors (Ref. AMM TASK 25-23-47-400-004) and (Ref. AMM TASK 25-23-47-400-009).
(5) Install the furnishings at zones 231 and 232:
(a) If the lavatories are removed, install them (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) If the stowages are removed, install them (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM D/O 25-27-44-40).
(c) If the galleys are removed, install them (Ref. AMM D/O 25-31-41-40), (Ref. AMM D/O 25-31-41-40), (Ref. AMM D/O 25-31-45-40), (Ref. AMM D/O 25-31-43-40), (Ref. AMM TASK 25-31-44-400-001) or (Ref. AMM D/O 25-31-46-40).
(d) If the passenger seats are removed, install them (Ref. AMM TASK 25-21-41-400-001).
(6) Close forward passenger/crew door 831(841) (Ref. AMM TASK 52-10-00-410-001).
(7) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings at zones 231 and 232:
(a) Install these upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
- 231EW, 231HW, 231LW, 231PW, 231SW, 231VW, 231BX, 231QX, 231TX and 231WX
- 232EW, 232HW, 232LW, 232PW, 232SW, 232VW, 232BX, 232QX, 232TX and 232WX.
- 231DW, 231GW, 231KW, 231NW, 231RW, 231UW, 231AX, 231PX, 231SX and 231VX
- 232DW, 232GW, 232KW, 232NW, 232RW, 232UW, 232AX, 232PX, 232SX and 232VX.
- 231FW, 231JW, 231MW, 231QW, 231TW, 231WW, 231CX, 231FX, 231RX, 231UX and 231XX
- 232FW, 232JW, 232MW, 232QW, 232TW, 232WW, 232CX, 232FX, 232RX, 232UX and 232XX.
(4) Install the door frame linings on the left and right-forward emergency exit-doors (Ref. AMM TASK 25-23-47-400-004) and (Ref. AMM TASK 25-23-47-400-009).
(5) Install the furnishings at zones 231 and 232:
(a) If the lavatories are removed, install them (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) If the stowages are removed, install them (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM D/O 25-27-44-40).
(c) If the galleys are removed, install them (Ref. AMM D/O 25-31-41-40), (Ref. AMM D/O 25-31-41-40), (Ref. AMM D/O 25-31-45-40), (Ref. AMM D/O 25-31-43-40), (Ref. AMM TASK 25-31-44-400-001) or (Ref. AMM D/O 25-31-46-40).
(d) If the passenger seats are removed, install them (Ref. AMM TASK 25-21-41-400-001).
(6) Close forward passenger/crew door 831(841) (Ref. AMM TASK 52-10-00-410-001).
(7) Remove the access platform(s).
Forward Passenger Compartment - Cleaning Area - Zones 231-232