DOC AIRBUS | AMM A320FRemoval of the Door Frame Linings of the Right Forward Emergency Exit Door from Zone 232
TASK 25-23-47-000-009-A
Removal of the Door Frame Linings of the Right Forward Emergency Exit Door from Zone 232
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-23-47-861-076-A ** ON A/C NOT FOR ALL
Subtask 25-23-47-020-063-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 03:48:47 UTC
Removal of the Door Frame Linings of the Right Forward Emergency Exit Door from Zone 232
ZONE: 232
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | PLUG - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| 995000 | AR | TOOL-MANUAL RELEASE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 232 | FWD PASSENGER COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-62-49-000-001-A | Removal of the Escape-Slide Inflation Reservoir |
| TASK 33-51-11-000-001-A | Removal of the Cabin Emergency Lights |
| TASK 33-51-13-000-001-A | Removal of the Cabin Wall-Mounted Emergency-Exit-Markers |
| TASK 33-51-16-000-001-A | Removal of the Emergency Exit Sign |
| TASK 52-22-00-010-001-A | Opening of the Emergency Exit Doors from the Passenger Compartment |
Door Frame Linings - Emergency Exit, zone 232Subtask 25-23-47-861-076-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001)
Subtask 25-23-47-010-078-A ** ON A/C NOT FOR ALL (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001)
B. Get Access
(1) Put the access platform in position on the related emergency exit door.
(2) Open the related emergency exit door (Ref. AMM TASK 52-22-00-010-001).
(3) Remove the emergency exit sign 46WL (Ref. AMM TASK 33-51-16-000-001)
(4) Remove the cabin emergency light 34WL (Ref. AMM TASK 33-51-11-000-001)
(5) Remove the cabin-wall mounted emergency-exit-marker 90WL4 (Ref. AMM TASK 33-51-13-000-001)
Subtask 25-23-47-865-062-A ** ON A/C NOT FOR ALL (1) Put the access platform in position on the related emergency exit door.
(2) Open the related emergency exit door (Ref. AMM TASK 52-22-00-010-001).
(3) Remove the emergency exit sign 46WL (Ref. AMM TASK 33-51-16-000-001)
(4) Remove the cabin emergency light 34WL (Ref. AMM TASK 33-51-11-000-001)
(5) Remove the cabin-wall mounted emergency-exit-marker 90WL4 (Ref. AMM TASK 33-51-13-000-001)
C. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CIDS/DEU B/ESS | 153RH | G03 |
| 49VU | LIGHTING/EMER LT/CABIN | 2WL | H06 |
| 49VU | LIGHTING/EMER LT/CABIN | 1WL | H05 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU B/NORM | 162RH | M09 |
| ** ON A/C NOT FOR ALL | |||
| 122VU | LIGHTING/CABIN/EMER/LT | 3WL | V07 |
Subtask 25-23-47-020-063-A ** ON A/C NOT FOR ALL
A. Removal of the Escape-Slide Lever Cover, if installed
(1) Remove the screws (2), (3), the washers (4) and the escape-slide lever cover (1).
Subtask 25-23-47-020-083-A ** ON A/C NOT FOR ALL (1) Remove the screws (2), (3), the washers (4) and the escape-slide lever cover (1).
B. Removal of the Hook
(1) Remove the screws (6), the washers (7) and the hook (5).
Subtask 25-23-47-020-064-A ** ON A/C NOT FOR ALL (1) Remove the screws (6), the washers (7) and the hook (5).
C. Removal of the Door Frame Lining
(1) Open the access panel (9).
(2) Remove the screws (10) and (12), the washers (11) and (13) and the shims (14).
(3) Remove the door frame lining (8).
(4) If necessary, remove the inflation reservoir (Ref. AMM TASK 25-62-49-000-001).
Subtask 25-23-47-020-065-A ** ON A/C NOT FOR ALL (1) Open the access panel (9).
(2) Remove the screws (10) and (12), the washers (11) and (13) and the shims (14).
(3) Remove the door frame lining (8).
(4) If necessary, remove the inflation reservoir (Ref. AMM TASK 25-62-49-000-001).
D. Remove the Door Frame Lining 232NX and 232YX, if installed
(1) Open the access panel (9).
(2) Remove the screws (23), (25) and the washers (24), (26).
(3) Remove the door frame lining (22) and (27).
Subtask 25-23-47-020-066-A ** ON A/C NOT FOR ALL (1) Open the access panel (9).
(2) Remove the screws (23), (25) and the washers (24), (26).
(3) Remove the door frame lining (22) and (27).
E. Removal of the Door Frame Lining 232EX and the 232DX
(1) Remove the screws (16) and the washers (17).
(2) Pull upward the door frame lining (15) to release the engage brackets from the yo-yo rolls.
(3) Remove the door frame lining (15).
(4) Remove the screws (36) and the washers (37).
(5) Pull downward the door frame lining (18) to release the engage brackets from the yo-yo rolls.
(6) Remove the door frame lining (18).
Subtask 25-23-47-020-067-A ** ON A/C NOT FOR ALL (1) Remove the screws (16) and the washers (17).
(2) Pull upward the door frame lining (15) to release the engage brackets from the yo-yo rolls.
(3) Remove the door frame lining (15).
(4) Remove the screws (36) and the washers (37).
(5) Pull downward the door frame lining (18) to release the engage brackets from the yo-yo rolls.
(6) Remove the door frame lining (18).
F. Removal of the Door Frame Lining
(1) Loosen the clamp (29) and disconnect the hose.
(2) Put the PLUG-BLANKING in each disconnected line end.
(3) Remove the screws (30), the washers (31) and the door frame lining (28).
(4) Remove the screws (32), the washers (33) and the outlet (34).
Subtask 25-23-47-020-068-A ** ON A/C NOT FOR ALL (1) Loosen the clamp (29) and disconnect the hose.
(2) Put the PLUG-BLANKING in each disconnected line end.
(3) Remove the screws (30), the washers (31) and the door frame lining (28).
(4) Remove the screws (32), the washers (33) and the outlet (34).
G. Removal of the Door Frame Lining(s) 232KX and/or 232GX
(1) Remove the screws (36) and the washers (37).
(2) Pull down the door frame lining(s) (35) and/or (38) to release the attach brackets from the yo-yo rolls and remove the door frame lining(s) (35) and/or (38).
Subtask 25-23-47-020-069-A ** ON A/C NOT FOR ALL (1) Remove the screws (36) and the washers (37).
(2) Pull down the door frame lining(s) (35) and/or (38) to release the attach brackets from the yo-yo rolls and remove the door frame lining(s) (35) and/or (38).
H. Removal of the Door Frame Lining 232LX
(1) Remove the handgrip (41):
(b) Carefully push the lugs (42) of the handgrip cover (43) in the direction of the arrows
(c) Remove the handgrip cover (43).
(2) Remove the screws (40), the washers (39) and the handgrip (41).
(3) Pull up the door frame lining (21) and release the brackets from the yo-yo rolls.
(4) Remove the door frame lining (21).
Subtask 25-23-47-020-125-A ** ON A/C NOT FOR ALL (1) Remove the handgrip (41):
CAUTION:
DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN CAUSE DAMAGE TO THE RETAINER.
(a) Put the 995000 TOOL-MANUAL RELEASE between the handgrip cover (43) and the handgrip (41).(b) Carefully push the lugs (42) of the handgrip cover (43) in the direction of the arrows
(c) Remove the handgrip cover (43).
(2) Remove the screws (40), the washers (39) and the handgrip (41).
(3) Pull up the door frame lining (21) and release the brackets from the yo-yo rolls.
(4) Remove the door frame lining (21).
I. Removal of the Door Frame Lining 232HX
(1) If necessary, remove the recessed panel (19).
(b) Carefully push the lugs (42) of the handgrip cover (43) in the direction of the arrows.
(c) Remove the handgrip cover (43).
(d) Remove the screws (40), the washers (39) and the handgrip (41).
(3) Pull up the door frame lining (20) and release the brackets from the yo-yo rolls.
(4) Remove the door frame lining (20).
(1) If necessary, remove the recessed panel (19).
NOTE: The burr tape attaches the recessed panel (19) to the door frame lining.
(2) Remove the handgrip (41):CAUTION:
DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN CAUSE DAMAGE TO THE RETAINER.
(a) Put the 995000 TOOL-MANUAL RELEASE between the handgrip cover (43) and the handgrip (41).(b) Carefully push the lugs (42) of the handgrip cover (43) in the direction of the arrows.
(c) Remove the handgrip cover (43).
(d) Remove the screws (40), the washers (39) and the handgrip (41).
(3) Pull up the door frame lining (20) and release the brackets from the yo-yo rolls.
(4) Remove the door frame lining (20).