Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
TASK 24-92-00-100-002-A
Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200231-01
CLEANING OF EWIS INSTALLED IN THE FORWARD PASSENGER COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 24-92-00-010-088-A ** ON A/C NOT FOR ALL
Subtask 24-92-00-160-051-A ** ON A/C NOT FOR ALL
Subtask 24-92-00-410-086-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:27:01 UTC
Cleaning of EWIS Installed in the Forward Passenger Compartment (Only If Contaminated)(EWIS)
1. Reason for the Job
Refer to the MPD TASK: 200231-01
CLEANING OF EWIS INSTALLED IN THE FORWARD PASSENGER COMPARTMENT (ONLY IF CONTAMINATED) (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 231 | FWD PASSENGER COMPARTMENT |
| 232 | FWD PASSENGER COMPARTMENT |
| 231AW, 231BW, 231CW, 231DW, 231EW, 231FW, 231GW, 231HW, 231JW, 231KW, 231LW, 231MW, 231NW, 231PW, 231QW, 231RW, 231SW, 231TW, 232AW, 232BW, 232CW, 232DW, 232EW, 232FW, 232GW, 232HW, 232JW, 232KW, 232LW, 232MW, 232NW, 232PW, 232QW, 232RW, 232SW, 232TW | |
| 231UW, 231VW, 231WW, 231XW, 231YW, 231ZW, 232UW, 232VW, 232WW, 232XW, 232YW, 232ZW |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 25-21-41-000-001-A | Removal of the Passenger Seats |
| TASK 25-21-41-400-001-A | Installation of the Passenger Seats |
| TASK 25-23-43-000-001-A | Removal of the Upper Sidewall Panel |
| TASK 25-23-43-400-001-A | Installation of the Upper Sidewall Panel |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
| TASK 25-23-44-400-001-A | Installation of the Lower Sidewall Panels (Dado Panels) |
| TASK 25-23-45-000-002-A | Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door |
| TASK 25-23-45-000-005-A | Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-006-A | Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-007-A | Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door |
| TASK 25-23-48-000-001-A | Removal of the Cove Light Panel |
| TASK 25-23-48-400-001-A | Installation of the Cove Light Panel |
| TASK 25-27-44-000-002-A | Removal of the Forward Stowage |
| TASK 25-27-44-000-003-A | Removal of the Stowage FWD RH |
| TASK 25-27-44-400-002-A | Installation of the Forward Stowage |
| TASK 25-27-44-400-003-A | Installation of the Stowage FWD RH |
| TASK 25-31-41-000-001-A | Removal of the Forward Galley Unit |
| TASK 25-31-41-400-001-A | Installation of the Forward Galley Unit |
| TASK 25-41-41-000-001-A | Removal of Lavatory A |
| TASK 25-41-41-400-001-A | Installation of Lavatory A |
| TASK 52-10-00-010-001-A | Opening of the Passenger/Crew Door |
| TASK 52-10-00-410-001-A | Closing of the Passenger/Crew Door |
| ESPM 2055000 | |
Subtask 24-92-00-010-088-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the zone 831 (841).
(2) Open the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in the zones 231 and 232:
(a) Remove the lavatories, if installed (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) Remove the stowage, if installed (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM TASK 25-27-44-000-003).
(c) Remove the galleys, if installed (Ref. AMM TASK 25-31-41-000-002).
(d) Remove the passenger seats, if installed (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the linings in the zones 231 and 232:
(a) Remove the upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
(b) Remove the lower sidewall panels (Ref. AMM TASK 25-23-44-000-001):
(c) Remove the cove light panels (Ref. AMM TASK 25-23-48-000-001):
Subtask 24-92-00-010-088-B ** ON A/C NOT FOR ALL (1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the zone 831 (841).
(2) Open the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in the zones 231 and 232:
(a) Remove the lavatories, if installed (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) Remove the stowage, if installed (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM TASK 25-27-44-000-003).
(c) Remove the galleys, if installed (Ref. AMM TASK 25-31-41-000-002).
(d) Remove the passenger seats, if installed (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the linings in the zones 231 and 232:
(a) Remove the upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
(b) Remove the lower sidewall panels (Ref. AMM TASK 25-23-44-000-001):
(c) Remove the cove light panels (Ref. AMM TASK 25-23-48-000-001):
A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the zone 831 (841).
(2) Open the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in the zones 231 and 232:
(a) Remove the lavatories, if installed (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) Remove the stowage, if installed (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM TASK 25-27-44-000-003).
(c) Remove the galleys, if installed (Ref. AMM TASK 25-31-41-000-002).
(d) Remove the passenger seats, if installed (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the linings in the zones 231 and 232:
(a) Remove the upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
(b) Remove the lower sidewall panels (Ref. AMM TASK 25-23-44-000-001):
(c) Remove the cove light panels (Ref. AMM TASK 25-23-48-000-001):
Subtask 24-92-00-862-076-A ** ON A/C NOT FOR ALL 4. Procedure(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the zone 831 (841).
(2) Open the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in the zones 231 and 232:
(a) Remove the lavatories, if installed (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) Remove the stowage, if installed (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM TASK 25-27-44-000-003).
(c) Remove the galleys, if installed (Ref. AMM TASK 25-31-41-000-002).
(d) Remove the passenger seats, if installed (Ref. AMM TASK 25-21-41-000-001).
(4) Remove the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).
(5) Remove the linings in the zones 231 and 232:
(a) Remove the upper sidewall panels (Ref. AMM TASK 25-23-43-000-001):
(b) Remove the lower sidewall panels (Ref. AMM TASK 25-23-44-000-001):
(c) Remove the cove light panels (Ref. AMM TASK 25-23-48-000-001):
Subtask 24-92-00-160-051-A ** ON A/C NOT FOR ALL
A. Cleaning of All Wiring Installed in the Forward Passenger Compartment (Only Contaminated Wiring)
(1) Clean wiring if there is dust or lint contamination ESPM 2055000.
(a) On the flight control wiring: routes 7S, 8S and 7M.
(b) On the engine control wiring: routes 1S and 2S.
(c) On the generator excitation wiring: routes 3E and 6E.
(d) On other wiring: routes 1M and 2M.
(e) On the coaxial wiring: routes 1T, 3T, 7T, 8T, 9T and 1U.
5. Close-up(1) Clean wiring if there is dust or lint contamination ESPM 2055000.
(a) On the flight control wiring: routes 7S, 8S and 7M.
(b) On the engine control wiring: routes 1S and 2S.
(c) On the generator excitation wiring: routes 3E and 6E.
(d) On other wiring: routes 1M and 2M.
(e) On the coaxial wiring: routes 1T, 3T, 7T, 8T, 9T and 1U.
Subtask 24-92-00-410-086-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings in the zones 231 and 232:
(a) Install the upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
(b) Install the lower sidewall panels (Ref. AMM TASK 25-23-44-400-001):
(c) Install the cove light panels (Ref. AMM TASK 25-23-48-400-001):
(3) Install the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-400-006) and (Ref. AMM TASK 25-23-45-400-007).
(4) Install the furnishings in the zones 231 and 232:
(a) Install the lavatories, if removed (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) Install the stowage, if removed (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM TASK 25-27-44-400-003).
(c) Install the galleys, if removed (Ref. AMM TASK 25-31-41-400-002).
(d) Install the passenger seats, if removed (Ref. AMM TASK 25-21-41-400-001).
(5) Close the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-410-001).
(6) Remove the access platform(s).
Subtask 24-92-00-410-086-B ** ON A/C NOT FOR ALL (1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings in the zones 231 and 232:
(a) Install the upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
(b) Install the lower sidewall panels (Ref. AMM TASK 25-23-44-400-001):
(c) Install the cove light panels (Ref. AMM TASK 25-23-48-400-001):
(3) Install the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-400-006) and (Ref. AMM TASK 25-23-45-400-007).
(4) Install the furnishings in the zones 231 and 232:
(a) Install the lavatories, if removed (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) Install the stowage, if removed (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM TASK 25-27-44-400-003).
(c) Install the galleys, if removed (Ref. AMM TASK 25-31-41-400-002).
(d) Install the passenger seats, if removed (Ref. AMM TASK 25-21-41-400-001).
(5) Close the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-410-001).
(6) Remove the access platform(s).
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings in the zones 231 and 232:
(a) Install the upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
(b) Install the lower sidewall panels (Ref. AMM TASK 25-23-44-400-001):
(c) Install the cove light panels (Ref. AMM TASK 25-23-48-400-001):
(3) Install the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-400-006) and (Ref. AMM TASK 25-23-45-400-007).
(4) Install the furnishings in the zones 231 and 232:
(a) Install the lavatories, if removed (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) Install the stowage, if removed (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM TASK 25-27-44-400-003).
(c) Install the galleys, if removed (Ref. AMM TASK 25-31-41-400-002).
(d) Install the passenger seats, if removed (Ref. AMM TASK 25-21-41-400-001).
(5) Close the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-410-001).
(6) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the linings in the zones 231 and 232:
(a) Install the upper sidewall panels (Ref. AMM TASK 25-23-43-400-001):
(b) Install the lower sidewall panels (Ref. AMM TASK 25-23-44-400-001):
(c) Install the cove light panels (Ref. AMM TASK 25-23-48-400-001):
(3) Install the door frame linings at the left and right FWD passenger/crew doors at FR20 (Ref. AMM TASK 25-23-45-400-006) and (Ref. AMM TASK 25-23-45-400-007).
(4) Install the furnishings in the zones 231 and 232:
(a) Install the lavatories, if removed (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) Install the stowage, if removed (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM TASK 25-27-44-400-003).
(c) Install the galleys, if removed (Ref. AMM TASK 25-31-41-400-002).
(d) Install the passenger seats, if removed (Ref. AMM TASK 25-21-41-400-001).
(5) Close the forward passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-410-001).
(6) Remove the access platform(s).
Forward Passenger Compartment - Access Panels - Zones 231-232