Inspection after Abnormal Movement of the Pax/Crew Door

TASK 05-51-29-200-001-A
Inspection after Abnormal Movement of the Pax/Crew Door

1. Reason for the Job
You must do this inspection if there is abnormal pax/crew door movement such as when it is lifted or pushed down by a loader or a jetway.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-45-000-002-A	Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door
TASK 25-23-45-000-003-A	Removal of the Door Frame Linings from the Left Aft Passenger/Crew Door
TASK 25-23-45-000-004-A	Removal of the Door Frame Linings from the Right Aft Passenger/Crew Door
TASK 25-23-45-000-005-A	Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door
TASK 25-23-45-400-005-A	Installation of the Door Frame Linings on the Right Aft Passenger/Crew Door
TASK 25-23-45-400-006-A	Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door
TASK 25-23-45-400-007-A	Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door
TASK 25-23-45-400-008-A	Installation of the Door Frame Linings on the Left Aft Passenger/Crew Door
TASK 25-23-46-000-001-A	Removal of the Door Linings from the Forward Passenger/Crew Doors
TASK 25-23-46-000-002-A	Removal of the Door Linings from the Aft Passenger/Crew Doors
TASK 25-23-46-400-001-A	Installation of the Door Linings on the Forward Passenger/Crew Doors
TASK 25-23-46-400-002-A	Installation of the Door Linings on the Aft Passenger/Crew Doors
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 52-10-00-860-001-A	Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A	Special Precautions after Work on the Passenger/Crew Door
TASK 52-11-00-200-002-A	Detailed Inspection of Forward Passenger/Crew Door, Internal Structure, LH/RH
TASK 52-11-00-210-002-A	General Visual Inspection of Forward Passenger/Crew Door Skin, External Surface, LH/RH
TASK 52-11-00-820-001-A	Adjustment of the Forward Passenger/Crew Door
TASK 52-11-11-000-001-A	Removal of the Forward Passenger/Crew Door
TASK 52-11-11-400-001-A	Installation of the Forward Passenger/Crew Door
TASK 52-11-12-000-001-A	Removal of the Door Support Arm, the Door Buffer, the Door Unlocking Handle and the Door Stay Mechanism
TASK 52-11-12-000-003-A	Removal of the Guide Arms
TASK 52-11-12-220-001-A	Detailed Visual Inspection of the Door Suspension Mechanism
TASK 52-11-12-400-001-A	Installation of the Door Support Arm, the Door Buffer, the Door Unlocking Handle and the Door Stay Mechanism
TASK 52-11-12-400-003-A	Installation of the Guide Arms
TASK 52-11-22-220-001-A	Detailed Visual Inspection of the Release Mechanism of the Emergency Escape Slide of the FWD Passenger/Crew Door
TASK 52-11-31-000-002-A	Removal of the Stop Fittings, Buffer, Guide Fittings, Rollers, Door Stop Fittings, Roller Fittings and Guide Arm Fittings
TASK 52-11-31-400-002-A	Installation of the Stop Fittings, the Buffer, the Guide Fittings, the Rollers, the Door Stop Fittings, the Roller Fittings and the Guide Arm Fittings
TASK 52-13-00-200-002-A	Detailed Inspection of Aft Passenger/Crew Door, Internal Structure, LH/RH
TASK 52-13-00-210-002-A	General Visual Inspection of Aft Passenger/Crew Door Skin, External Surface, LH/RH
TASK 52-13-00-820-001-A	Adjustment of the Aft Passenger/Crew Door
TASK 52-13-11-000-001-A	Removal of the Aft Passenger/Crew Door
TASK 52-13-11-400-001-A	Installation of the Aft Passenger/Crew Door
TASK 52-13-12-000-001-A	Removal of the Support Arm, Door Buffer, Door Pushbutton Switch and Door Stay Mechanism
TASK 52-13-12-000-002-A	Removal of the Guide Arms
TASK 52-13-12-220-001-A	Detailed Visual Inspection of the Door Suspension Mechanism
TASK 52-13-12-400-001-A	Installation of the Support Arm, Door Buffer, Door Pushbutton Switch and Door Stay Mechanism
TASK 52-13-12-400-002-A	Installation of the Guide Arms
TASK 52-13-22-220-001-A	Detailed Visual Inspection of the Release Mechanism of the Emergency Escape Slide of the Aft Passenger/Crew Door
TASK 52-13-31-000-002-A	Removal of the Stop Fittings, the Buffer, the Guide Fittings, the Rollers, the Door Stop Fittings, the Roller Fittings and Guide Arm Fittings
TASK 52-13-31-400-002-A	Installation of the Stop Fittings, the Buffer, the Guide Fittings, the Rollers, the Door Stop Fittings, the Roller Fittings and the Guide Arm Fittings
SRM 521000
SRM 530000
Passenger/Crew Doors

3. Job Set-up
Subtask 05-51-29-010-051-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the related passenger/crew door.
(2) Open the related passenger/crew door (Ref. AMM TASK 52-10-00-010-001).

Subtask 05-51-29-481-051-A ** ON A/C NOT FOR ALL

B. Safety Precautions
(1) Obey the special precautions before you start work on the door (Ref. AMM TASK 52-10-00-860-001).

Subtask 05-51-29-020-050-A ** ON A/C NOT FOR ALL

C. Removal of the Components
(1) Remove the door-frame lining panels of the related door.
(a) For the left FWD passenger/crew door (Ref. AMM TASK 25-23-45-000-005).
(b) For the right FWD passenger/crew door (Ref. AMM TASK 25-23-45-000-002).
(c) For the left aft passenger/crew door (Ref. AMM TASK 25-23-45-000-003).
(d) For the right aft passenger/crew door (Ref. AMM TASK 25-23-45-000-004).
(2) Remove the door lining panels of the related door.
(a) For the FWD passenger/crew doors (Ref. AMM TASK 25-23-46-000-001).
(b) For the aft passenger/crew doors (Ref. AMM TASK 25-23-46-000-002). passenger/crew door.

4. Procedure
Subtask 05-51-29-210-059-A ** ON A/C NOT FOR ALL

A. Inspection of the Related Door

Passenger/Crew Doors ** ON A/C NOT FOR ALL

ITEM	INSPECTION TASKS	PHASE 1	PHASE 2	PHASE 3
1.	Visual Inspection of the Door
A.	(1) Do a visual inspection of the external surface of the door skin: (a) For the FWD passenger/crew door: (Ref. AMM TASK 52-11-00-210-002) (b) For the aft passenger/crew door: (Ref. AMM TASK 52-13-00-210-002).	X
	(2) Do a visual inspection of: - The door circumference for distortion, cracks or tearing - The door seal retainer - The girt bar.	X
	(3) Do a visual inspection of the fuselage structure for distortion, cracks or tearing of frame fitting.	X
	If you find damage: (a) Do a structural repair: - For the door: SRM 521000 - For the fuselage: SRM 530000. (b) Do the detailed inspection without removal (item 2).		X
B.	Do a check of the opening and closing of the door (Ref. AMM TASK 52-10-00-010-001), (Ref. AMM TASK 52-10-00-410-001).	X
	(1) Make sure that there are no unusual noises or hard points.
	(2) Make sure that the guide arms move freely.
	If you find damage: Do the detailed inspection without removal (item 2).		X
C.	Do a check of the peripheral clearance and out-of-flushness between the door edge and the frame panel. Do this this check from the outside while the door is closed:	X
	(1) For the FWD passenger/crew door (Ref. AMM TASK 52-11-00-820-001).
	(2) For the aft passenger/crew door (Ref. AMM TASK 52-13-00-820-001).
	If you find damage: Do the detailed inspection without removal (item 2).		X
D.	Do a check of the escape-slide release mechanism to make sure that: There are no unusual noises or hard points. The handle moves freely.	X
	If you find damage:
	(1) Do a detailed visual inspection of the release mechanism of the emergency escape slide of the passenger/crew door: (a) For the FWD passenger/crew door: (Ref. AMM TASK 52-11-22-220-001) (b) For the aft passenger/crew door: (Ref. AMM TASK 52-13-22-220-001).		X
	- If you find damage:
	(a) Replace the damaged components.		X
	(b) Do the detailed inspection without removal (Item 2).		X
2.	Detailed Inspection Without Removal NOTE: These inspection are applicable if you found damage during the previous inspections.
A.	Examine the support arm:		X
	(1) Make sure that there are no cracks, distortion or damaged paint.
	(2) Examine the condition of the connection links on the door side, for distortion or damaged paint.
	If you find damage: (a) Do a detailed visual inspection of the door suspension mechanism: - For the FWD passenger/crew door (Ref. AMM TASK 52-11-12-220-001) - For the aft passenger/crew door (Ref. AMM TASK 52-13-12-220-001). (b) Do the detailed inspection with removal (item 3).			X
B.	Examine the guide arms:		X
	(1) Make sure that there is no wrinkling on the upper and lower guide arms.
	(2) Examine the fitting that attaches the guide arm to the frame side for distortion or damaged fasteners.
	(3) On the door side, examine the guide-arm attachment fitting for tearing.
	If you find damage: Do the detailed inspection with removal (item 3).			X
C.	Examine the fuselage support-arm fittings:		X
	(1) Examine the fittings that attach the support arm to the door frame. Make sure that there is no distortion, damaged fasteners or bearing migration.
	If you find bearing migration or damage: Contact Airbus.			X
3.	Detailed Inspection with Removal NOTE: These inspections are applicable if you found damage during the detailed inspection without removal (item 2).
A.	Remove the door:			X
	(1) For the FWD passenger/crew door (Ref. AMM TASK 52-11-11-000-001)
	(2) For the aft passenger/crew door (Ref. AMM TASK 52-13-11-000-001).
B.	Door Inspection Do a visual inspection of the door inner structure (specially at the frame and beam that attach the support arm, the support arm and the guide arm fittings). Do a visual inspection of the mechanism (Ref. AMM TASK 52-11-00-200-002) (Ref. AMM TASK 52-13-00-200-002).			X
C.	Inspection of the door suspension			X
	(1) Remove the door suspension:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-12-000-001)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-12-000-001).
	(2) Examine the support arm for distortion, cracks or damaged paint. (Ref. AMM TASK 52-11-12-220-001) (Ref. AMM TASK 52-13-12-220-001).			X
D.	Inspection of the Guide Arms
	(1) Remove the guide arms:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-12-000-003)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-12-000-002).
	(2) Examine the guide arms for buckling.			X
	(3) Remove the guide-arm attachment fitting from the frame side:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-31-000-002)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-31-000-002).
	(4) Examine the frame area below the fitting for cracks or distortion, and elongated holes in the beam web.			X
E.	Installation/Replacement the Components
	(1) Install the guide-arm attachment fitting on the frame side:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-31-400-002)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-31-400-002).
	(2) Install the guide arms:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-12-400-003)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-12-400-002).
	(3) Install the door suspension:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-12-400-001)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-12-400-001).
	(4) Install the door:			X
	(a) For the FWD passenger/crew door (Ref. AMM TASK 52-11-11-400-001)
	(b) For the aft passenger/crew door (Ref. AMM TASK 52-13-11-400-001).

5. Close-up
Subtask 05-51-29-420-051-A ** ON A/C NOT FOR ALL

A. Installation of the Components
(1) Install the door lining panels of the related door:
(a) For the FWD passenger/crew doors (Ref. AMM TASK 25-23-46-400-001).
(b) For the aft passenger/crew doors (Ref. AMM TASK 25-23-46-400-002).
(2) Install the door-frame lining panels of the related door:
(a) For the left FWD passenger/crew door (Ref. AMM TASK 25-23-45-400-006).
(b) For the right FWD passenger/crew door (Ref. AMM TASK 25-23-45-400-007).
(c) For the left aft passenger/crew door (Ref. AMM TASK 25-23-45-400-008).
(d) For the right aft passenger/crew door (Ref. AMM TASK 25-23-45-400-005).

Subtask 05-51-29-410-050-A ** ON A/C NOT FOR ALL

B. Close Access
(1) Obey the special precautions after the work on the door (Ref. AMM TASK 52-10-00-860-002).
(2) Close the related passenger/crew door (Ref. AMM TASK 52-10-00-410-001).

Subtask 05-51-29-942-050-A ** ON A/C NOT FOR ALL

C. Put the aircraft back to its initial configuration
(1) Remove all the tools and equipment from the work area.
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:51:49 UTC