W DOC AIRBUS | AMM A320F

Removal of the Door Frame Linings from the Left Aft Passenger/Crew Door


TASK 25-23-45-000-003-A
Removal of the Door Frame Linings from the Left Aft Passenger/Crew Door


1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
CAP - BLANKING, PLASTIC
No specific
1
PLUG - BLANKING, PLASTIC
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
995000
AR
TOOL-MANUAL RELEASE
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
261TW, 261UW, 261VW, 261WW
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 23-73-13-000-001-A
Removal of the Additional Attendant Panel
TASK 23-73-22-000-001-A
Removal of the Attendant Indication Panel
TASK 23-73-44-000-001-A
Removal of the Handset/Cradle
TASK 24-42-00-861-001-A
Energize the Ground Service Network from the External Power
TASK 33-51-11-000-001-A
Removal of the Cabin Emergency Lights
TASK 33-51-13-000-001-A
Removal of the Cabin Wall-Mounted Emergency-Exit-Markers
TASK 33-51-16-000-001-A
Removal of the Emergency Exit Sign
TASK 35-21-41-000-001-A
Removal of the Emergency Oxygen Containers
TASK 52-10-00-010-001-A
Opening of the Passenger/Crew Door
3. Job Set-up
Subtask 25-23-45-861-053-A
A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001)
Subtask 25-23-45-010-054-A
B. Get Access
   (1) Open the AFT passenger/crew door, Zone 832 (Ref. AMM TASK 52-10-00-010-001).
   (2) Remove the attendant indication panel 320RH9 (Ref. AMM TASK 23-73-22-000-001).
   (3) Remove the AFT attendant panel 126RH (Ref. AMM TASK 23-73-13-000-001).
   (4) Remove the handset cradle 330RH9 (Ref. AMM TASK 23-73-44-000-001).
   (5) Remove the emergency exit sign 45WL (Ref. AMM TASK 33-51-16-000-001).
   (6) Remove the cabin emergency light 33WL (Ref. AMM TASK 33-51-11-000-001).
   (7) Remove the cabin wall-mounted emergency-exit-marker 90WL7 (Ref. AMM TASK 33-51-13-000-001).
Subtask 25-23-45-865-063-A
C. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
2001VUVACU CLEANER SKT-CAB-Z2615MEF06
4. Procedure
Subtask 25-23-45-020-057-B
A. Removal of door frame linings 261VW, 261UW, 261TW, 261WW
   (1) Remove door frame lining 261VW (4):
CAUTION: MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
     (a) Disconnect the electrical connector (22) from the electrical harness.
     (b) Put the CAP - BLANKING, PLASTIC on the disconnected electrical connectors.
     (c) Loosen the clamp (11) and disconnect the hose (12).
     (d) Put the PLUG - BLANKING, PLASTIC on the disconnected line ends.
     (e) Hold door frame lining 261VW (4) in position.
     (f) Remove the caps (7), the screws (6), (8) and (10) and the washers (5) and (9).
     (g) If necessary, remove emergency oxygen container [35WR] (Ref. AMM TASK 35-21-41-000-001).
     (h) Remove door frame lining 261VW (4).
   (2) Remove door frame lining 261UW (1):
     (a) Remove the screws (6), the washers (5) and door frame lining 261UW (1).
   (3) Remove door frame lining 261TW (2):
     (a) Remove the screws (24), the washers (23) and the latch hook (25).
     (b) Remove the cap (7), the screws (8) and (6) and the washers (5).
     (c) Carefully tilt door frame lining 261TW (2) and remove the nuts (14) and disengage the socket (13).
     (d) Remove door frame lining 261TW (2).
   (4) Remove door frame lining 261WW (3):
     (a) Remove the cap (7), the screws (8) and (6) and the washers (5).
     (b) Remove the handgrip (20):
CAUTION: DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN CAUSE DAMAGE TO THE RETAINER.
       1 Put the 995000 TOOL-MANUAL RELEASE between the handgrip cover (18) and the handgrip (20).
       2 Carefully push on the lugs (17) of the handgrip cover (18) in the direction of the arrows.
       3 Remove the handgrip cover (18).
       4 If you installed the screws (16) and (19), plates (15), handgrip (20) and spacer (21) (if installed), remove them.
     (c) Remove door frame lining 261WW (3).
[Rev.10 from 2021] 2026.04.01 03:49:39 UTC