Removal of the Door Frame Linings from the Right Aft Passenger/Crew Door

TASK 25-23-45-000-004-A
Removal of the Door Frame Linings from the Right Aft Passenger/Crew Door

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	PLUG - BLANKING
995000	AR	TOOL-MANUAL RELEASE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
262TW, 262UW, 262VW, 262WW

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 33-51-11-000-001-A	Removal of the Cabin Emergency Lights
TASK 33-51-13-000-001-A	Removal of the Cabin Wall-Mounted Emergency-Exit-Markers
TASK 33-51-16-000-001-A	Removal of the Emergency Exit Sign
TASK 35-21-41-000-001-A	Removal of the Emergency Oxygen Containers
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
Door Frame Linings at the Right Aft Passenger/Crew Door.

3. Job Set-up
Subtask 25-23-45-861-054-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001)

Subtask 25-23-45-010-052-A

B. Get Access
(1) Open the AFT passenger/crew door, Zone 842 (Ref. AMM TASK 52-10-00-010-001).
(2) Remove the emergency exit sign 44WL (Ref. AMM TASK 33-51-16-000-001).
(3) Remove the cabin emergency light 32WL (Ref. AMM TASK 33-51-11-000-001).
(4) Remove the cabin wall-mounted emergency-exit marker 90WL8 (Ref. AMM TASK 33-51-13-000-001).

4. Procedure
Subtask 25-23-45-020-054-B

A. Removal of Door Frame Linings 262VW, 262UW, 262TW and 262WW

Door Frame Linings at the Right Aft Passenger/Crew Door.

(1) Remove door frame lining 262VW (1):

CAUTION: MAKE MATCH MARKS ON ALL THE ELECTRICAL WIRES BEFORE YOU DISCONNECT THEM. INCORRECT CONNECTION OF WIRES WILL CAUSE DAMAGE TO EQUIPMENT.

(a) Disconnect the electrical connector (23).
(b) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.

(c) Loosen the clamp (10).
(d) Disconnect the hose (9) from door frame lining 262VW (1).
(e) Put the PLUG-BLANKING in each disconnected line end.

(f) Hold door frame lining 262VW (1) in position.
(g) Remove the caps (8), the screws (5), (7) and (12), and the washers (6) and (11).
(h) Remove emergency oxygen container [36WR] (Ref. AMM TASK 35-21-41-000-001).
(i) If the protection plate (24) and the screws (25) are installed, remove them.
(j) Remove door frame lining 262VW (1).
(2) Remove door frame lining 262UW (4):
(a) Remove the screws (5) and the washers (6).
(b) Remove door frame lining 262UW (4).
(3) Remove door frame lining 262TW (3):
(a) Remove the screws (14), the washers (13) and the latch hook (15).
(b) Remove the caps (8), the screws (7) and (5) and the washers (6).
(c) Remove the handgrip (17):

CAUTION: DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN CAUSE DAMAGE TO THE RETAINER.

1 Put the 995000 TOOL-MANUAL RELEASE between the handgrip cover (21) and the handgrip (17).
2 Carefully push on the lugs (20) of the handgrip cover (21) in the direction of the arrows.
3 Remove the handgrip cover (21).
4 Remove the screws (19) and (22), plate (18), handgrip (17) and spacer (16) (if installed).
(d) Remove door frame lining 262TW (3).
(4) Remove door frame lining 262WW (2):
(a) Remove the caps (8), the screws (7) and (5) and the washers (6).
(b) Remove the handgrip (17):

CAUTION: DO NOT USE TOO MUCH FORCE WHEN YOU REMOVE THE COVER AS THIS CAN CAUSE DAMAGE TO THE RETAINER.

[Rev.10 from 2021] 2026.03.31 23:31:23 UTC