DOC AIRBUS | AMM A320F73-22 (IAE) - FADEC SYSTEM
- PB.501 CONF:[13] FADEC SYSTEM - ADJUSTMENT/TEST
-
73-22-00-710-040-A
[IAE]
[10]
Operational Test of the FADEC SYSTEM on the Ground -
73-22-00-740-042-A
[IAE]
[10]
Correct faults of the Engine Scheduled Maintenance Report (SMR) -
73-22-00-710-043-A
[IAE]
[10]
Check for Erroneous Signal Positions to the Zones Controller from the Bleed and Wing/Nacelle Anti-Ice Valves with Engines, APU and Packs Operating -
73-22-00-710-043-A-01
[IAE]
[10]
Check for Erroneous Signal Positions to the Zone Controller from the Bleed and Wing/Nacelle Anti-Ice Valves with Engines, APU and Packs Operating -
73-22-00-860-010-A
[IAE]
[10]
Change of the Inhibition Status of the Thrust Reverser System
-
73-22-00-710-040-A
[IAE]
[10]
- PB.401 CONF:[13] SENSOR - P2/T2 - REMOVAL/INSTALLATION
-
73-22-11-000-010-A
[IAE]
[10]
Removal of the P2/T2 Sensor -
73-22-11-400-010-A
[IAE]
[10]
Installation of the P2/T2 Sensor
-
73-22-11-000-010-A
[IAE]
[10]
- PB.501 CONF:[13] SENSOR - P2/T2 - ADJUSTMENT/TEST
-
73-22-11-710-040-A
[IAE]
[10]
Operational Test of the P2/T2 Probe Heater
-
73-22-11-710-040-A
[IAE]
[10]
- PB.601 CONF:[13] SENSOR - P2/T2 - INSPECTION/CHECK
-
73-22-11-200-010-A
[IAE]
[10]
Inspection of the P2/T2 Sensor
-
73-22-11-200-010-A
[IAE]
[10]
- PB.401 CONF:[13] SENSOR - P3/T3 - REMOVAL/INSTALLATION
-
73-22-15-000-010-A
[IAE]
[10]
Removal of the P3/T3 Sensor -
73-22-15-400-010-A
[IAE]
[10]
Installation of the P3/T3 Sensor
-
73-22-15-000-010-A
[IAE]
[10]
- PB.401 CONF:[13] ENGINE ELECTRONIC CONTROL (EEC) - REMOVAL/INSTALLATION
-
73-22-34-000-010-A
[IAE]
[10]
Removal of the Electronic Engine Control (EEC) -
73-22-34-400-010-A
[IAE]
[10]
Installation of the Electronic Engine Control (EEC)
-
73-22-34-000-010-A
[IAE]
[10]
- PB.501 CONF:[13] ENGINE ELECTRONIC CONTROL (EEC) - ADJUSTMENT/TEST
-
73-22-34-710-040-A
[IAE]
[10]
Operational Test of the EEC
-
73-22-34-710-040-A
[IAE]
[10]
- PB.401 CONF:[13] PLUG ASSEMBLY - DATA ENTRY - REMOVAL/INSTALLATION
-
73-22-35-000-011-B
[IAE]
[10]
Removal of the Data Entry Plug Assembly 4000KS-J6 -
73-22-35-400-011-B
[IAE]
[10]
Installation of the Data Entry Plug Assembly 4000KS-J6
-
73-22-35-000-011-B
[IAE]
[10]
- PB.601 CONF:[13] PLUG ASSEMBLY - DATA ENTRY - INSPECTION/CHECK
-
73-22-35-200-010-A
[IAE]
[10]
Inspection of the Data Entry Plug Assembly
-
73-22-35-200-010-A
[IAE]
[10]
- PB.801 CONF:[13] PLUG ASSEMBLY - DATA ENTRY - REPAIRS
-
73-22-35-300-010-A
[IAE]
[10]
Replace the Jumpers, Contacts or Connector - VRS3500 -
73-22-35-300-010-A-01
[IAE]
[10]
Replace the Jumpers, Contacts or Connector - VRS3500 -
73-22-35-300-011-A
[IAE]
[10]
Repair the Jumper Contact or Contact - VRS3501 -
73-22-35-300-012-A
[IAE]
[10]
Replace the Data Entry Plug Backshell Assembly - VRS3503
-
73-22-35-300-010-A
[IAE]
[10]
- PB.401 CONF:[13] STATOR - ENGINE DEDICATED ALTERNATOR - REMOVAL/INSTALLATION
-
73-22-38-000-010-B
[IAE]
[10]
Removal of the Engine Dedicated Alternator (EDA) Stator and/or Cooling Shroud -
73-22-38-400-010-B
[IAE]
[10]
Installation of the Engine Dedicated Alternator (EDA) Stator and or Cooling Shroud
-
73-22-38-000-010-B
[IAE]
[10]
- PB.201 CONF:[13] AIR TUBES - P2/T2 - MAINTENANCE PRACTICES
-
73-22-48-870-801-A
[IAE]
[10]
Purge of the Air Tubing (P2) on Engine 1(2)
-
73-22-48-870-801-A
[IAE]
[10]
- PB.401 CONF:[13] AIR TUBES - P2/T2 - REMOVAL/INSTALLATION
-
73-22-48-000-010-A
[IAE]
[10]
Removal of the P2T2 Probe Tube Assembly -
73-22-48-400-010-A
[IAE]
[10]
Installation of the P2T2 Probe Tube/Hose Assembly
-
73-22-48-000-010-A
[IAE]
[10]
- PB.601 CONF:[13] AIR TUBES - P2/T2 - INSPECTION/CHECK
-
73-22-48-200-010-A
[IAE]
[10]
General Check of the P2/T2 Air Tubes
-
73-22-48-200-010-A
[IAE]
[10]
- PB.201 CONF:[13] TUBES - FUEL SYSTEM AIR - MAINTENANCE PRACTICES
-
73-22-49-790-010-A
[IAE]
[10]
Leak Check of the Pb Sense Line -
73-22-49-870-801-A
[IAE]
[10]
Purge the Air Tubing (P2.5) on Engine 1(2) -
73-22-49-870-802-A
[IAE]
[10]
Purge the Air Tubing (P12.5) on Engine 1(2) -
73-22-49-960-801-A
[IAE]
[10]
Replacement of the Air Tubing (P2.5) on Engine 1(2) -
73-22-49-960-802-A
[IAE]
[10]
Replacement of the Air Tubing (P12.5) on Engine 1(2)
-
73-22-49-790-010-A
[IAE]
[10]
- PB.401 CONF:[13] TUBES - FUEL SYSTEM AIR - REMOVAL/INSTALLATION
-
73-22-49-000-801-A
[IAE]
[10]
Removal of the Pb Sense-Line Pipe -
73-22-49-400-801-A
[IAE]
[10]
Installation of the Pb Sense-Line Pipe
-
73-22-49-000-801-A
[IAE]
[10]
- PB.601 CONF:[13] TUBES - FUEL SYSTEM AIR - INSPECTION/CHECK
-
73-22-49-220-040-A
[IAE]
[10]
Purge the Burner Pressure Sensor Tube -
73-22-49-220-010-A
[IAE]
[10]
Inspection of the EEC Pb Inlet Port
-
73-22-49-220-040-A
[IAE]
[10]
- PB.401 CONF:[13] SENSOR AND MANIFOLD - P4.9 - REMOVAL/INSTALLATION
-
73-22-51-000-010-B
[IAE]
[10]
Removal of the P4.9 Sensor and Manifold -
73-22-51-400-010-B
[IAE]
[10]
Installation of the P4.9 Sensor and Manifold
-
73-22-51-000-010-B
[IAE]
[10]
- PB.501 CONF:[13] SENSOR AND MANIFOLD - P4.9 - ADJUSTMENT/TEST
-
73-22-51-700-801-A
[IAE]
[10]
Functional Test of the P4.9 (P5) Sensor System
-
73-22-51-700-801-A
[IAE]
[10]
- PB.401 CONF:[13] METERING UNIT - FUEL - REMOVAL/INSTALLATION
-
73-22-52-000-010-B
[IAE]
[10]
Removal of the Fuel Metering Unit (FMU) -
73-22-52-400-010-B
[IAE]
[10]
Installation of the Fuel Metering Unit (FMU)
-
73-22-52-000-010-B
[IAE]
[10]
- PB.501 CONF:[13] METERING UNIT - FUEL - ADJUSTMENT/TEST
-
73-22-52-700-010-A
[IAE]
[10]
Adjustment/Test of the Fuel Metering Unit (FMU) - Convert the Woodward FMU SBE 73-0172 or SBE 73-0223 -
73-22-52-700-011-A
[IAE]
[10]
Adjustment/Test of the Fuel Metering Unit (FMU) - Convert the TRW Lucas FMU SBE 73-0173
-
73-22-52-700-010-A
[IAE]
[10]