72-00 (CFML) - ENGINE - GENERAL
- PB.001 CONF:[03] ENGINE - GENERAL - DESCRIPTION AND OPERATION
- PB.201 CONF:[03] ENGINE - GENERAL - MAINTENANCE PRACTICES
-
72-00-00-820-802-A
[CFML]
[10]
Find the Zero Index Mark of the High Pressure Compressor (HPC) Rotor -
72-00-00-820-803-A
[CFML]
[10]
Turning of the N2 Rotor -
72-00-00-820-805-A
[CFML]
[10]
Find the Zero Index Mark of the N1 Rotor
-
72-00-00-820-802-A
[CFML]
[10]
- PB.301 CONF:[03] ENGINE - GENERAL - SERVICING
-
72-00-00-600-804-A
[CFML]
[10]
Recommendation for Engine Preservation -
72-00-00-620-802-A
[CFML]
[10]
Preservation of an Engine for a Period of 30 to 365 days -
72-00-00-630-802-A
[CFML]
[10]
Depreservation of an Engine -
72-00-00-920-804-A
[CFML]
[10]
Discard of the Life Limited Engine Parts -
72-00-00-620-803-A
[CFML]
[10]
Preservation of an Engine for a Period up to 10 days -
72-00-00-620-804-A
[CFML]
[10]
Preservation of an Engine for a Period up to 30 days -
72-00-00-620-805-A
[CFML]
[10]
Preservation of an Engine for a Period up to 90 days -
72-00-00-620-806-A
[CFML]
[10]
Preservation Procedure for Exceeded Long Term Preservation Period -
72-00-00-620-807-A
[CFML]
[10]
Preservation Renewal Requirements -
72-00-00-920-805-A
[CFML]
[10]
Off Schedule Vane Replacement
-
72-00-00-600-804-A
[CFML]
[10]
- PB.501 CONF:[03] ENGINE - GENERAL - ADJUSTMENT/TEST
-
72-00-00-740-801-A
[CFML]
[10]
Water Wash Procedure (Menu Mode)
-
72-00-00-740-801-A
[CFML]
[10]
- PB.601 CONF:[03] ENGINE - GENERAL - INSPECTION/CHECK
-
72-00-00-200-826-A
[CFML]
[10]
Inspection of the Fan Blade if it is Seized into the Abradable Strip after Tail Windmilling -
72-00-00-220-803-A
[CFML]
[10]
Check of the Axial Preload of the Low Pressure Turbine (LPT) Stage 7 Blades -
72-00-00-200-813-A
[CFML]
[10]
Inspection/Check of Exposed Hardware -
72-00-00-200-814-A
[CFML]
[10]
Inspection/Check of Foreign Object Damage (FOD) (Bird Strike Included) -
72-00-00-290-812-A
[CFML]
[10]
Engine Borescope Examination Preparation -
72-00-00-210-818-A
[CFML]
[10]
Visual Inspection after Volcanic Ash, Dust or Sand Ingestion -
72-00-00-200-815-A
[CFML]
[10]
Inspection of Engine Tubes, Hoses and Fittings -
72-00-00-200-816-A
[CFML]
[10]
Inspection after Engine Windmilling -
72-00-00-200-817-A
[CFML]
[10]
Visual Inspection of the Fan Section after Engine Operation in Severe Icing Condition -
72-00-00-290-814-A
[CFML]
[10]
Borescope Inspection of the Stage 1 High Pressure Turbine (HPT) Nozzle Guide Vanes -
72-00-00-290-815-A
[CFML]
[10]
Borescope Inspection of the Stage 2 High Pressure Turbine (HPT) Nozzle Guide Vanes (NGVs) -
72-00-00-200-818-A
[CFML]
[10]
Inspection/Check After the Engine has Exceeded the Operational Limits -
72-00-00-200-819-A
[CFML]
[10]
Procedure after Halogen Products Contamination -
72-00-00-200-821-A
[CFML]
[10]
Procedure after Engine Fire or Use of Fire-Extinguishing Agents -
72-00-00-200-823-A
[CFML]
[10]
Over Serviceable Limit Extension -
72-00-00-210-819-A
[CFML]
[10]
Inspection/Check of the PS3 Line -
72-00-00-210-821-A
[CFML]
[10]
Inspection/Check of the P3B Line -
72-00-00-290-819-A
[CFML]
[10]
Borescope Inspection of Stage 2-7 Low Pressure Turbine (LPT) Nozzle Segments -
72-00-00-290-820-A
[CFML]
[10]
Borescope Inspection of the Stage 1 High Pressure Turbine (HPT) Shrouds -
72-00-00-290-821-A
[CFML]
[10]
Borescope Inspection of the Stage 2 High Pressure Turbine (HPT) Shrouds -
72-00-00-290-822-A
[CFML]
[10]
Borescope Inspection of the Low Pressure Turbine (LPT) Blades -
72-00-00-290-823-A
[CFML]
[10]
Borescope Inspection of the Low Pressure Turbine (LPT) Shroud Segments -
72-00-00-290-824-A
[CFML]
[10]
Determination of HPT Blade Tip Material Loss Using Tip Notches
-
72-00-00-200-826-A
[CFML]
[10]
- PB.701 CONF:[03] ENGINE - GENERAL - CLEANING/PAINTING
-
72-00-00-100-805-A
[CFML]
[10]
Engine Cleaning Specifications -
72-00-00-100-803-A
[CFML]
[10]
Gas Path Cleaning with a Cleaning Solution -
72-00-00-100-804-A
[CFML]
[10]
Gas Path Cleaning with Water (Non Detergent) -
72-00-00-100-806-A
[CFML]
[10]
Cleaning of the Engine External Surfaces
-
72-00-00-100-805-A
[CFML]
[10]