General Visual Inspection of All G and P Routes Installed in the Forward Passenger Overhead-Compartment (EWIS)

TASK 24-92-00-210-810-A
General Visual Inspection of All G and P Routes Installed in the Forward Passenger Overhead-Compartment (EWIS)

ZONE: 233
ZONE: 234

1. Reason for the Job
Refer to the MPD TASK: 200233-03
GENERAL VISUAL INSPECTION OF ALL G & P ROUTES INSTALLED IN THE FORWARD PASSENGER COMPARTMENT OVERHEAD COMPARTMENT (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
No specific	AR	FLASHLIGHT
No specific	AR	MIRROR - INSPECTION, FLEXIBLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
233	FWD PASSENGER COMPT OVERHEAD COMPARTMENT
234	FWD PASSENGER COMPT OVERHEAD COMPARTMENT
231AC, 231BC, 231CC, 231DC, 231EC, 231FC, 232AC
231GC, 231HC

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 25-23-41-000-001-A	Removal of the Ceiling Panels
TASK 25-23-41-400-001-A	Installation of the Ceiling Panels
TASK 25-24-41-000-001-A	Removal of the Overhead Stowage Compartments (OHSC)
TASK 25-24-41-400-001-A	Installation of the Overhead Stowage Compartments (OHSC)
TASK 25-27-44-000-002-A	Removal of the Forward Stowage
TASK 25-27-44-000-003-A	Removal of the Stowage FWD RH
TASK 25-27-44-400-002-A	Installation of the Forward Stowage
TASK 25-27-44-400-003-A	Installation of the Stowage FWD RH
TASK 25-31-41-000-001-A	Removal of the Forward Galley Unit
TASK 25-31-41-400-001-A	Installation of the Forward Galley Unit
TASK 25-41-41-000-001-A	Removal of Lavatory A
TASK 25-41-41-400-001-A	Installation of Lavatory A
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
ESPM 2052110
Forward Passenger Overhead-Compartment - Access Panels - Zones 233-234 ** ON A/C NOT FOR ALL
Forward Passenger Overhead-Compartment - Inspection Area - Zones 233-234
Forward Passenger Overhead-Compartment - Access Panels - Zones 233-234 ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 24-92-00-010-163-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at the zone 831 (841).
(2) Open the passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the furnishings in the zones 231 and 232:
(a) Remove the lavatories, if installed (Ref. AMM TASK 25-41-41-000-001) and (Ref. AMM D/O 25-41-42-00).
(b) Remove the stowage, if installed (Ref. AMM TASK 25-27-44-000-002) and (Ref. AMM TASK 25-27-44-000-003).
(c) Remove the galleys, if installed (Ref. AMM TASK 25-31-41-000-002).
(4) Remove the overhead stowage compartments between FR20 and FR35 (Ref. AMM TASK 25-24-41-000-001).
(5) Remove the ceiling panels in the zones 233 and 234 (Ref. AMM TASK 25-23-41-000-001):

231AC 232AC 231BC 231CC 231DC 231EC 231FC 231GC 231HC.

Subtask 24-92-00-010-163-B ** ON A/C NOT FOR ALL

231AC 232AC 231BC 231CC 231DC 231EC 231FC.

Subtask 24-92-00-862-145-A ** ON A/C NOT FOR ALL

B. Make sure that the aircraft electrical circuits are de-energized
(Ref. AMM TASK 24-41-00-862-002).

4. Procedure
Subtask 24-92-00-210-110-A ** ON A/C NOT FOR ALL

A. General Visual Inspection of All G and P Route Wiring Installed in the Forward Passenger Overhead Compartment
(1) Do a visual inspection of the wiring to make sure that there is no signs of ageing, alteration, overheating, scaling and deformation ESPM 2052110:
(a) On the AC/DC feeder routes: 3G and 6G.

NOTE: Use a FLASHLIGHT or a MIRROR - INSPECTION, FLEXIBLE if necessary.

(2) Make sure that there is no dust contamination.

5. Close-up
Subtask 24-92-00-410-161-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the ceiling panels in the zones 233 and 234 (Ref. AMM TASK 25-23-41-400-001):

231AC 232AC 231BC 231CC 231DC 231EC 231FC 231GC 231HC.

(3) Install the overhead stowage compartments between FR20 and FR35 (Ref. AMM TASK 25-24-41-400-001).
(4) Install the furnishings in the zones 231 and 232:
(a) Install the lavatories, if removed (Ref. AMM TASK 25-41-41-400-001) and (Ref. AMM D/O 25-41-42-40).
(b) Install the stowage, if removed (Ref. AMM TASK 25-27-44-400-002) and (Ref. AMM TASK 25-27-44-400-003).
(c) Install the galleys, if removed (Ref. AMM TASK 25-31-41-400-002).
(5) Close the passenger/crew door 831 (841) (Ref. AMM TASK 52-10-00-410-001).
(6) Remove the access platform(s).

Subtask 24-92-00-410-161-B ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the ceiling panels in the zones 233 and 234 (Ref. AMM TASK 25-23-41-400-001):

231AC 232AC 231BC 231CC 231DC 231EC 231FC.

[Rev.10 from 2021] 2026.03.31 23:26:22 UTC