Visual Inspection of the Bleed-Air Precooler-Exchanger Inlet

TASK 36-11-44-200-802-A
Visual Inspection of the Bleed-Air Precooler-Exchanger Inlet

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 1M(3 FT)
No specific	AR	LIGHT SOURCE - WHITE
No specific	AR	MIRROR - INSPECTION, FLEXIBLE
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
No specific	AR	WARNING NOTICE(S)

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BBC1)	Non Aqueous Cleaner-- Naphta based and Alcohol -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
437AL, 438AR, 447AL, 448AR
FOR [1000EM1] (ENGINE-1)
437AL, 438AR, 451AL, 452AR
FOR [1000EM2] (ENGINE-2)
447AL, 448AR, 461AL, 462AR

D. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 36-11-44-000-802-A	Removal of the Bleed-Air Precooler-Exchanger Cold-Inlet
TASK 36-11-44-400-802-A	Installation of the Bleed-Air Precooler-Exchanger Cold-Inlet
TASK 71-13-00-010-802-A	Opening of the Fan Cowl Doors
TASK 71-13-00-410-802-A	Closing of the Fan Cowl Doors
TASK 78-30-00-040-805-A	Deactivation of the Thrust Reverser System for Ground Maintenance
TASK 78-30-00-440-805-A	Reactivation of the Thrust Reverser System after Ground Maintenance
TASK 78-36-00-010-802-A	Opening of the Thrust Reverser Cowl-Doors
TASK 78-36-00-410-802-A	Closing of the Thrust Reverser Cowl-Doors
Inlet of the Bleed-Air Precooler-Exchanger

3. Job Set-up
Subtask 36-11-44-861-053-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 36-11-44-941-056-A ** ON A/C NOT FOR ALL

B. Safety Precautions
(1) Make sure that engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(2) On the AIR COND panel 30VU:

Make sure that the ENG 1(2) BLEED pushbutton switch is released (the OFF legend is on).
Make sure that the APU BLEED pushbutton switch is released (the ON legend is off).
Put a WARNING NOTICE(S) to tell persons not to operate the pneumatic system.

(3) On ENG panel 115VU:

Put a WARNING NOTICE(S) to tell persons not to start engine 1(2).

(4) On the HP ground connector:

Put a WARNING NOTICE(S) to tell persons not to pressurize the pneumatic system.

(5) On the ENG section of the maintenance panel 50VU:

Make sure that the ON legend of the ENG/FADEC GND PWR 1(2) pushbutton switch is off.
Put a WARNING NOTICE(S) to tell persons not to energize FADEC 1(2).

Subtask 36-11-44-865-058-A ** ON A/C NOT FOR ALL

C. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	AIR BLEED/ENG 2/MONG	3HA2	D12
49VU	AIR BLEED/ENG 1/CTL	2HA1	D11
122VU	AIR BLEED/ENG 1/MONG	3HA1	Z23
122VU	AIR BLEED/ENG 2/CTL	2HA2	Z22

Subtask 36-11-44-010-062-A ** ON A/C NOT FOR ALL

D. Get Access
(1) Open the fan cowl doors (Ref. AMM TASK 71-13-00-010-802):
(a) For ENGINE-1 (1000EM1):
437AL 438AR
(b) For ENGINE-2 (1000EM2):
447AL 448AR.
(2) Put the ACCESS PLATFORM 1M(3 FT) in position below the engine.

Subtask 36-11-44-040-055-A ** ON A/C NOT FOR ALL

E. Deactivation of the Thrust Reverser
(1) Make the thrust reverser unserviceable (Ref. AMM TASK 78-30-00-040-805).

Subtask 36-11-44-010-063-A ** ON A/C NOT FOR ALL

F. Get Access
(1) Open the thrust reverser doors (Ref. AMM TASK 78-36-00-010-802):
(a) FOR [1000EM1] (ENGINE-1)
451AL 452AR
(b) FOR [1000EM2] (ENGINE-2)
461AL 462AR.

4. Procedure
Subtask 36-11-44-210-051-A ** ON A/C NOT FOR ALL

A. Visual Inspection of the Bleed-Air Precooler-Exchanger Inlet
(1) Clean dirty parts with a Textile-Lint free Cotton - (Material No.14SBA1) and Non Aqueous Cleaner-- Naphta based and Alcohol - (Material No.08BBC1) .
(2) With a LIGHT SOURCE - WHITE and MIRROR - INSPECTION, FLEXIBLE, examine the Bleed-Air Precooler-Exchanger Inlet for cracks.
(3) If you find a crack, you must replace the Bleed-Air Precooler-Exchanger Inlet (Ref. AMM TASK 36-11-44-000-802) and (Ref. AMM TASK 36-11-44-400-802).

5. Close-up
Subtask 36-11-44-410-058-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the thrust reverser doors (Ref. AMM TASK 78-36-00-410-802):
(a) FOR [1000EM1] (ENGINE-1)
451AL 452AR
(b) FOR [1000EM2] (ENGINE-2)
461AL 462AR.

Subtask 36-11-44-440-053-A ** ON A/C NOT FOR ALL

B. Reactivation of the Thrust Reverser
(1) Make the thrust reverser serviceable (Ref. AMM TASK 78-30-00-440-805).

Subtask 36-11-44-410-059-A ** ON A/C NOT FOR ALL

C. Close Access
(1) Close the fan cowl doors (Ref. AMM TASK 71-13-00-410-802):
(a) FOR [1000EM1] (ENGINE-1)
437AL 438AR
(b) FOR [1000EM2] (ENGINE-2)
447AL 448AR.
(2) Remove the access platform(s).
(3) Remove the WARNING NOTICE(S).

Subtask 36-11-44-865-059-A ** ON A/C NOT FOR ALL

D. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	AIR BLEED/ENG 2/MONG	3HA2	D12
49VU	AIR BLEED/ENG 1/CTL	2HA1	D11
122VU	AIR BLEED/ENG 1/MONG	3HA1	Z23
122VU	AIR BLEED/ENG 2/CTL	2HA2	Z22

Subtask 36-11-44-862-053-A ** ON A/C NOT FOR ALL

E. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 01:09:37 UTC