Installation of the Smart PCMCIA Card (SPC) of the FDIMU

TASK 31-36-00-400-805-A
Installation of the Smart PCMCIA Card (SPC) of the FDIMU

ZONE: 128
FIN: 10TV ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)
No specific	1	SMART PCMCIA CARD

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
128	REAR AVIONIC COMPARTMENT
824

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-36-00-710-802-A	Operational Check of Cellular Radio Interlock Logic
TASK 52-41-00-010-002-A	Open the Avionics Compartment Doors for Access
TASK 52-41-00-410-002-A	Close the Avionics Compartment Doors after Access
Smart PCMCIA Card (SPC) of the FDIMU

3. Job Set-up
Subtask 31-36-00-861-089-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make sure that the aircraft electrical circuits are energized (Ref. AMM TASK 24-41-00-861-002).

Subtask 31-36-00-010-098-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Make sure that the ACCESS PLATFORM 2M (6 FT) is in position at access door 824 in zone 128.
(2) Make sure that access door 824 is open (Ref. AMM TASK 52-41-00-010-002).

Subtask 31-36-00-865-174-A ** ON A/C NOT FOR ALL

C. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	AIDS & RCDR/FDIMU	5TV	K15
** ON A/C NOT FOR ALL
121VU	AIDS & RCDR/FDIMU	5TV	K38

4. Procedure
Subtask 31-36-00-400-057-A ** ON A/C NOT FOR ALL

A. Install the Smart PCMCIA Card (SPC)

Smart PCMCIA Card (SPC) of the FDIMU ** ON A/C NOT FOR ALL

(1) Open the cover.
(2) Insert the SMART PCMCIA CARD carefully into the interface until the card has connected with the contacts.
(3) Close the cover.

5. Close-up
Subtask 31-36-00-865-175-A ** ON A/C NOT FOR ALL

A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	AIDS & RCDR/FDIMU	5TV	K15
** ON A/C NOT FOR ALL
121VU	AIDS & RCDR/FDIMU	5TV	K38

Subtask 31-36-00-710-141-A ** ON A/C NOT FOR ALL

B. Test of the Interlock of the SPC installation
(1) Do the Interlock test of the SPC (Ref. AMM TASK 31-36-00-710-802).

Subtask 31-36-00-410-097-A ** ON A/C NOT FOR ALL

C. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close access door 824 (Ref. AMM TASK 52-41-00-410-002).
(3) Remove the access platform(s).

Subtask 31-36-00-862-091-A ** ON A/C NOT FOR ALL

D. Aircraft Maintenance Configuration
(1) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 08:35:54 UTC