Operational Test of the Side Stick Priority

TASK 27-96-00-710-003-A
Operational Test of the Side Stick Priority

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

WARNING: MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS SURFACES ARE CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.

ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
822

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 29-10-00-863-003-A	Pressurize the Blue Hydraulic System with a Hydraulic Ground Power-Cart
TASK 29-10-00-863-003-A-01	Pressurize the Blue Hydraulic System with the Blue Electric Pump
TASK 29-10-00-864-003-A	Depressurize the Blue Hydraulic System
TASK 29-23-00-863-001-A	Pressurize the Green Hydraulic System from the Yellow Hydraulic System through the PTU with the Electric Pump
TASK 29-23-00-864-001-A	Depressurize the Green and Yellow Hydraulic Systems after Operation of the PTU
TASK 29-24-00-863-001-A	Pressurize the Yellow Hydraulic System with the Electric Pump
TASK 29-24-00-864-001-A	Depressurize the Yellow Hydraulic System
TASK 31-60-00-860-001-A	EIS Start Procedure
TASK 31-60-00-860-002-A	EIS Stop Procedure

3. Job Set-up
Subtask 27-96-00-860-051-A

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).
(2) Pressurize the Green, Blue and Yellow hydraulic systems with the electric pumps (Ref. AMM TASK 29-23-00-863-001) (Ref. AMM TASK 29-10-00-863-003) (Ref. AMM TASK 29-24-00-863-001).
(3) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001).
(4) On the center pedestal, on the ECAM control panel, push the F/CTL key (on the lower ECAM display unit, the F/CTL page comes into view).
(5) On overhead panel 23VU, make sure that FLT CTL/ELAC 1 and FLT/SEC 1 pushbutton switches are pushed (on these pushbutton switches, the FAULT and OFF legends are off).
(6) On overhead panel 24VU, make sure that FLT CTL/ELAC 2, FLT CTL/SEC 2 and FLT CTL/SEC 3 pushbutton switches are pushed (on these pushbutton switches, the FAULT and OFF legends are off).

Subtask 27-96-00-010-051-A

B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position below access door 822.
(2) Open access door 822.
(3) On battery power center 105VU:

Loosen the two screws and remove the protective cover.

Subtask 27-96-00-865-057-A

C. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	FLIGHT CONTROLS/ELAC1/NORM/SPLY	15CE1	B11
49VU	FLIGHT CONTROLS/FCDC1/SPLY	20CE1	B10
49VU	FLIGHT CONTROLS/SEC1/NORM/SPLY	21CE1	B08
** ON A/C NOT FOR ALL
49VU	FLIGHT CONTROLS/ELAC1/NORM/SPLY	15CE1	B06
49VU	FLIGHT CONTROLS/FCDC1/SPLY	20CE1	B05
49VU	FLIGHT CONTROLS/SEC1/NORM/SPLY	21CE1	B03
** ON A/C ALL
105VU	FLIGHT CONTROLS/ELAC2/STBY SPLY	16CE2	A02
105VU	FLT CTL/ELAC1/STBY SPLY	16CE1	A01
105VU	FLT CTL/SEC1/STBY SPLY	22CE	B01
121VU	FLIGHT CONTROLS/SEC3/SPLY	21CE3	Q19
121VU	FLIGHT CONTROLS/SEC2/SPLY	21CE2	Q18
121VU	FLIGHT CONTROLS/ELAC2/NORM/SPLY	15CE2	R20

Subtask 27-96-00-865-080-A

D. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	FLIGHT CONTROLS/FCDC2/SPLY	20CE2	Q20

4. Procedure
Subtask 27-96-00-710-056-A ** ON A/C NOT FOR ALL

A. Test

NOTE: During the test, the ECAM display unit shows the fault of FCDC 1 or FCDC 2. Ignore this indication.

(1) Do this test:

ACTION	RESULT
1.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
2.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
3.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side-stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side-stick controller back to the neutral position.
4.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
5.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
6.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
7.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
8.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
9.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side-stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side-stick controller back to the neutral position.
10.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
11.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
12.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
13.Close circuit breaker 20CE2.
14.Open circuit breaker 20CE1.
15.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
16.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
17.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side stick controller back to the neutral position.
18.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
19.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
20.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
21.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On the panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
22.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
23.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side-stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side-stick controller back to the neutral position.
24.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
25.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
26.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
27.Close circuit breaker 20CE1.

Subtask 27-96-00-710-056-B ** ON A/C NOT FOR ALL

A. Test

NOTE: During the test, the ECAM display unit shows the fault of FCDC 1 or FCDC 2. Ignore this indication.

(1) Do this test:

ACTION	RESULT
1.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
2.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
3.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side stick controller back to the neutral position.
4.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
5.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
6.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
7.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
8.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
9.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side-stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side-stick controller back to the neutral position.
10.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
11.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
12.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
13.Close circuit breaker 20CE2.
14.On the CAPT and F/O lateral console, on the side stick controllers: Move the two side stick controllers around their axis at the same time.	Aural announcement: dual input On panels 130VU and 131VU, on the SIDE STICK PRIORITY/CAPT and the SIDE STICK PRIORITY F/O annunciators: The green CAPT and F/O legends flash at the same time.
15.Open circuit breaker 20CE1.
16.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
17.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
18.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side-stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side-stick controller back to the neutral position.
19.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
20.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
21.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
22.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
23.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
24.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side-stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side-stick controller back to the neutral position.
25.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
26.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
27.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
28.Close circuit breaker 20CE1.
29.On the CAPT and F/O lateral console, on the side stick controllers: Move the two side stick controllers around their axis at the same time.	Aural announcement: dual input On panels 130VU and 131VU, on the SIDE STICK PRIORITY/CAPT and the SIDE STICK PRIORITY F/O annunciators: The green CAPT and F/O legends flash at the same time.

Subtask 27-96-00-710-056-C

A. Test

NOTE: During the test, the ECAM display unit shows the fault of FCDC 1 or FCDC 2. Ignore this indication.

(1) Do this test:

ACTION	RESULT
1.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
2.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
3.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side stick controller back to the neutral position.
4.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
5.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
6.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
7.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
8.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
9.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side stick controller back to the neutral position.
10.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
11.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
12.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
13.Close circuit breaker 20CE2.
14.On the CAPT and F/O lateral console, on the side stick controllers: Move the two side stick controllers around their axis at the same time.	Aural announcement: dual input
15.Open circuit breaker 20CE1.
16.On the CAPT lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority left On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator comes on.
17.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
18.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 131VU, on the SIDE STICK PRIORITY/CAPT annunciator: The green CAPT legend comes on when you move the F/O side-stick controller away from the neutral position, The green CAPT legend goes off when you move the F/O side-stick controller back to the neutral position.
19.On the F/O lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 130VU: The red arrow of the SIDE STICK PRIORITY/F/O annunciator goes off.
20.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
21.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
22.On the F/O lateral console, on the side stick controller: Push the takeover and priority pushbutton switch and hold for 30 seconds. Release the takeover and priority pushbutton switch after 30 seconds.	Aural announcement: priority right On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator comes on.
23.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
24.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons stay in the neutral position.
	On panel 130VU, on the SIDE STICK PRIORITY/F/O annunciator: The green F/O legend comes on when you move the CAPT side-stick controller away from the neutral position, The green F/O legend goes off when you move the CAPT side-stick controller back to the neutral position.
25.On the CAPT lateral console, on the side stick controller: Push and then release the takeover and priority pushbutton switch.	On panel 131VU: The red arrow of the SIDE STICK PRIORITY/CAPT annunciator goes off.
26.On the CAPT lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
27.On the F/O lateral console: Move the side stick controller around its axis and then to zero.	On the lower ECAM display-unit, on the F/CTL page: The symbols for the elevators and the ailerons move and then go back to the neutral position.
28.Close circuit breaker 20CE1.
29.On the CAPT and F/O lateral console, on the side stick controllers: Move the two side stick controllers around their axis at the same time.	Aural annoucement: dual input

5. Close-up
Subtask 27-96-00-410-052-A

A. Close Access
(1) Install the protective cover on battery power center 105VU.
(2) Tighten the two screws.
(3) Close access door 822.
(4) Remove the access platform(s).

Subtask 27-96-00-860-062-A

B. Put the aircraft back to its initial configuration.
(1) Depressurize the Green, Blue and Yellow hydraulic systems (Ref. AMM TASK 29-23-00-864-001) (Ref. AMM TASK 29-10-00-864-003) (Ref. AMM TASK 29-24-00-864-001).
(2) Do the EIS stop procedure (Ref. AMM TASK 31-60-00-860-002).
(3) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 05:28:55 UTC