W DOC AIRBUS | AMM A320F

Uploading of DMC1 Operational Software with the Portable Data Loader (PDL)

TASK 31-60-00-610-803-F
Uploading of DMC1 Operational Software with the Portable Data Loader (PDL)

ZONE: 210
FIN: 1WT1 ** ON A/C NOT FOR ALL
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
210
CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
 B. Referenced Information
REFERENCE
DESIGNATION
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A
De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01
De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02
De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-38-00-610-804-A
Onboard Software Uploading Procedure
TASK 31-60-00-740-011-A
LRU Identification Check
TASK 31-60-00-860-001-A
EIS Start Procedure
TASK 31-60-00-860-002-A
EIS Stop Procedure
3. Job Set-up
Subtask 31-60-00-861-065-A ** ON A/C NOT FOR ALL
A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-60-00-860-123-A ** ON A/C NOT FOR ALL
B. Aircraft Maintenance Configuration
   (1) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001).
Subtask 31-60-00-960-056-A ** ON A/C NOT FOR ALL
C. Prepare the media disk(s).
   (1) Get the media disk(s) from the storage box in the cockpit.
Make sure that the media disk(s) is(are) the correct one(s) for the aircraft configuration.
     (a) Make sure that the Part Number (P/N) written on the media disk(s) is the same as the P/N written in the airline configuration-management document.
       1 If the media disk(s) is (are) not available or not the correct one(s), contact your Airline Engineering Department to get the correct part number(s) applicable to the aircraft.
Subtask 31-60-00-960-056-B ** ON A/C NOT FOR ALL
C. Prepare the software.
   (1) Get the Display Management Computer (DMC) software.
   (2) Make sure that the Part Number (P/N) of the DMC software is the same as the P/N given in the airline configuration-management document.
     (a) If the DMC software with the correct P/N is not available, contact the Airline Engineering Department to get the applicable DMC software.
Subtask 31-60-00-865-085-A ** ON A/C NOT FOR ALL
D. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
49VUAUTO FLT/MCDU/111CA1B01
49VUEIS/ECAM/CTL/PNL15WTE12
49VUEIS/DMC1/SPLY10WT1E11
49VUEIS/DMC3/STBY/SPLY14WT1E10
49VUEIS/DMC1/SWTG21WT1E09
** ON A/C NOT FOR ALL
49VUL/G/LGCIU/SYS1/NORM1GAC09
49VUEIS/DMC3/SWTG21WT3E07
** ON A/C NOT FOR ALL
49VUEIS/ECAM/CTL/PNL15WTE11
49VUEIS/DMC1/SPLY10WT1E10
49VUEIS/DMC3/STBY/SPLY14WT1E09
49VUEIS/DMC1/SWTG21WT1E08
49VUAUTO FLT/MCDU/111CA1H07
** ON A/C NOT FOR ALL
121VUDLS&/DLRB/SPLY5TDJ15
** ON A/C NOT FOR ALL
121VUPDL/PWR/SPLY14TDK19
** ON A/C NOT FOR ALL
121VUAUTO FLT/MCDU/211CA2N20
121VUEIS/DMC3/SPLY10WT3Q09
121VUEIS/DMC2/SPLY10WT2Q08
121VUEIS/DMC2/SWTG21WT2R08
** ON A/C NOT FOR ALL
121VUDATA/LOADER/SPLY3TDJ16
121VUDLSU &/DLRB/SPLY5TDJ15
** ON A/C NOT FOR ALL
121VUPDL/PWR/SPLY14TDJ45
121VUDATA/LOADER/SPLY3TDJ39
121VUDLSU &/DLRB/SPLY5TDJ38
Subtask 31-60-00-860-135-A ** ON A/C NOT FOR ALL
E. Make sure that the aircraft is in the ground configuration:
ACTION
RESULT
1.On the ECAM control panel:
  • Push the BLEED key to get the BLEED page.
On the lower ECAM DU:
  • The BLEED page comes into view.
  • The white GND indication comes into view in the middle area of the page.
Subtask 31-60-00-280-069-A ** ON A/C NOT FOR ALL
F. Do a Check of the Part Number (P/N) of the Operational Software that you will upload in DMC1
   (1) Do a check of the P/N of the DMC1 operational software (Ref. AMM TASK 31-60-00-740-011).
     (a) On the DMC1 LRU IDENTIFICATION 1/5 page, read the P/N of the DMC1 operational software.
     (b) Make sure that the P/N of the DMC1 operational software given on the DMC1 LRU IDENTIFICATION 1/5 page is different from the P/N of the DMC1 operational software written on the media disk(s).
Subtask 31-60-00-280-069-B ** ON A/C NOT FOR ALL
F. Check of the P/N of the DMC 1 Operational Software
   (1) Do a check of the P/N of the DMC 1 operational software (Ref. AMM TASK 31-60-00-740-011).
     (a) On the DMC1 LRU IDENTIFICATION 1/5 page, read the P/N of the DMC 1 operational software.
     (b) Make sure that the P/N of the DMC 1 operational software given on the DMC1 LRU IDENTIFICATION 1/5 page is different from the P/N of the DMC 1 operational software in the airline configuration-management document.
4. Procedure
Subtask 31-60-00-970-055-A ** ON A/C NOT FOR ALL
A. Uploading of the Display Management Computer (DMC) 1 Operational Software with the PDL
   (1) Upload the DMC 1 operational software (Ref. AMM TASK 31-38-00-610-804).
Subtask 31-60-00-280-070-A ** ON A/C NOT FOR ALL
B. Check of the Part Number (P/N) of the Operational Software Uploaded in DMC1
   (1) Do a check of the P/N of the DMC1 operational software (Ref. AMM TASK 31-60-00-740-011).
     (a) On the DMC1 LRU IDENTIFICATION 1/5 page, read the P/N of the DMC1 operational software.
     (b) Make sure that the P/N of the DMC1 operational software is the same as the P/N of the DMC1 operational software written on the media disk(s).
Subtask 31-60-00-280-070-B ** ON A/C NOT FOR ALL
B. Check of the P/N of the DMC 1 Operational Software
   (1) Do a check of the P/N of the DMC 1 operational software (Ref. AMM TASK 31-60-00-740-011).
     (a) On the DMC1 LRU IDENTIFICATION 1/5 page, read the P/N of the DMC 1 operational software.
     (b) Make sure that the P/N of the DMC 1 operational software is the same as the P/N of the DMC 1 operational software in the airline configuration-management document.
Subtask 31-60-00-280-071-A ** ON A/C NOT FOR ALL
C. Check of the Part Number (P/N) of the DMC1 Operational Software in the Equipment Configuration Report
   (1) On the MCDU MENU page, push the line select key adjacent to the CFDS indication.
   (2) On the MAINTENANCE MENU page, push the line select key adjacent to the AVIONICS CONFIG REPORTS indication.
   (3) On the AVIONICS CONFIG REPORTS page, push the line select key adjacent to the START indication.
   (4) On the AVIONICS CONFIG REPORTS page, push the line select key adjacent to the EQUIPMENT CONFIG REPORTS indication.
   (5) If the printer is on, push the PRINT key.
   (6) If the printer is not on, on the EQUIPMENT CONFIG REPORTS page, push the line select key adjacent to the ATA316334 DMC1 indication.
   (7) On the EQUIPMENT CONFIGURATION REPORT/ATA316334 DMC1 page, make sure that the correct software (software DB/N1) component is uploaded.
   (8) Push the line select key adjacent to the RETURN indication until the MAINTENANCE 1/2 page comes into view.
5. Close-up
Subtask 31-60-00-860-126-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
   (1) On the MCDU:
  • Push the MCDU MENU key to get the MCDU MENU page.
  • Set the BRT knob to OFF.
   (2) Put the media disk(s) back into the storage box in the cockpit.
   (3) Do the EIS stop procedure (Ref. AMM TASK 31-60-00-860-002).
Subtask 31-60-00-860-126-B ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
   (1) On the Multipurpose Control & Display Unit (MCDU):
     (a) Push the MCDU MENU key to get the MCDU MENU page.
     (b) Set the BRT knob to the OFF position.
   (2) Do the EIS stop procedure
(Ref. AMM TASK 31-60-00-860-002).
Subtask 31-60-00-862-065-A ** ON A/C NOT FOR ALL
B. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
[Rev.10 from 2021] 2026.04.01 00:37:51 UTC
"Aviabrain" 2025