Removal of the Battery of the Emergency Power Supply Unit (EPSU)
TASK 33-51-38-000-002-A
Removal of the Battery of the Emergency Power Supply Unit (EPSU)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 33-51-38-860-060-A ** ON A/C NOT FOR ALL
Subtask 33-51-38-020-053-A
[Rev.10 from 2021]
2026.04.01 04:23:54 UTC
Removal of the Battery of the Emergency Power Supply Unit (EPSU)
FIN: 10WL
FIN: 11WL
FIN: 12WL
FIN: 13WL
FIN: 14WL ** ON A/C NOT FOR ALL
FIN: 15WL ** ON A/C NOT FOR ALL
FIN: 16WL ** ON A/C NOT FOR ALL
FIN: 17WL ** ON A/C NOT FOR ALL
1. Reason for the JobFIN: 11WL
FIN: 12WL
FIN: 13WL
FIN: 14WL ** ON A/C NOT FOR ALL
FIN: 15WL ** ON A/C NOT FOR ALL
FIN: 16WL ** ON A/C NOT FOR ALL
FIN: 17WL ** ON A/C NOT FOR ALL
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | STEPLADDER 1.5 M (5 FT) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| FOR [10WL] (POWER-EMERGENCY SUPPLY) | |
| 221BC | |
| FOR [11WL] (EPSU) | |
| 251KC | |
| 241KW | |
| FOR [12WL] (EPSU) | |
| 251KC | |
| 242KW | |
| FOR [13WL] (EPSU) | |
| 261CC | |
| FOR [14WL] (EPSU) | |
| 231JC | |
| FOR [15WL] (EPSU) | |
| 231JC | |
| FOR [16WL] (EPSU) | |
| 242KW | |
| FOR [17WL] (EPSU) | |
| 241KW | |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| FOR [10WL] (POWER-EMERGENCY SUPPLY) | |
| TASK 25-23-42-000-001-A | Removal of the Ceiling Panels - Forward Utility Area |
| FOR [11WL] (EPSU) | |
| TASK 25-23-41-000-001-A | Removal of the Ceiling Panels |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
| FOR [12WL] (EPSU) | |
| TASK 25-23-41-000-001-A | Removal of the Ceiling Panels |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
| FOR [13WL] (EPSU) | |
| TASK 25-23-42-000-002-A | Removal of the Ceiling Panels - Aft Utility Area |
| TASK 35-21-41-000-001-A | Removal of the Emergency Oxygen Containers |
| FOR [14WL] (EPSU) | |
| TASK 25-23-41-000-001-A | Removal of the Ceiling Panels |
| FOR [15WL] (EPSU) | |
| TASK 25-23-41-000-001-A | Removal of the Ceiling Panels |
| FOR [16WL] (EPSU) | |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
| FOR [17WL] (EPSU) | |
| TASK 25-23-44-000-001-A | Removal of the Lower Sidewall Panels (Dado Panels) |
Subtask 33-51-38-860-060-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that NO SMOKING switch 190RH is in the OFF position.
(4) On Forward Attendant Panel (FAP) 120RH, make sure that the LIGHT EMER pushbutton switch and its integral light are off.
Subtask 33-51-38-860-060-D ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that NO SMOKING switch 190RH is in the OFF position.
(4) On Forward Attendant Panel (FAP) 120RH, make sure that the LIGHT EMER pushbutton switch and its integral light are off.
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that NO SMOKING switch 190RH is in the OFF position.
(4) On Flight Attendant Panel (FAP) 120RH, make sure that the EMER pushbutton and its internal light are off.
Subtask 33-51-38-860-060-E ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that NO SMOKING switch 190RH is in the OFF position.
(4) On Flight Attendant Panel (FAP) 120RH, make sure that the EMER pushbutton and its internal light are off.
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On the overhead panel 25VU, make sure that the EMER EXIT LT switch 4WL is in the OFF position.
(3) On the overhead panel 25VU, make sure that the EXIT switch 190RH is in the OFF position.
(4) On the Flight Attendant Panel (FAP) 120RH, make sure that the EMER button and its light are off.
Subtask 33-51-38-860-060-F ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On the overhead panel 25VU, make sure that the EMER EXIT LT switch 4WL is in the OFF position.
(3) On the overhead panel 25VU, make sure that the EXIT switch 190RH is in the OFF position.
(4) On the Flight Attendant Panel (FAP) 120RH, make sure that the EMER button and its light are off.
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that No PED switch 190RH is in the OFF position.
(4) On Flight Attendant Panel (FAP) 120RH, make sure that the EMER button and its light are off.
Subtask 33-51-38-865-055-A (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On overhead panel 25VU, make sure that EMER EXIT LT switch 4WL is in the OFF position.
(3) On overhead panel 25VU, make sure that No PED switch 190RH is in the OFF position.
(4) On Flight Attendant Panel (FAP) 120RH, make sure that the EMER button and its light are off.
B. Open, safety and tag this(these) circuit breaker(s):
Subtask 33-51-38-010-051-B ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CABIN | 2WL | H06 |
| 49VU | LIGHTING/EMER LT/CABIN | 1WL | H05 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CABIN | 2WL | H04 |
| 49VU | LIGHTING/EMER LT/CABIN | 1WL | H03 |
| ** ON A/C ALL | |||
| 122VU | LIGHTING/CABIN/EMER/LT | 3WL | V07 |
C. Get Access
(1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [11WL] (EPSU)
between the rear emergency exit doors
(c) FOR [12WL] (EPSU)
between the rear emergency exit doors
(d) FOR [13WL] (EPSU)
between the aft passenger/crew doors
(e) FOR [14WL] (EPSU)
between the forward emergency exit doors
(f) FOR [15WL] (EPSU)
between the forward emergency exit doors.
(2) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(b) FOR [11WL] (EPSU)
remove 251KC between the rear emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(c) FOR [12WL] (EPSU)
remove 251KC between the rear emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(d) FOR [14WL] (EPSU)
remove 231JC between the forward emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(e) FOR [15WL] (EPSU)
remove 231JC between the forward emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(3) Lower one side of the emergency oxygen container to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
Subtask 33-51-38-010-051-C ** ON A/C NOT FOR ALL (1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [11WL] (EPSU)
between the rear emergency exit doors
(c) FOR [12WL] (EPSU)
between the rear emergency exit doors
(d) FOR [13WL] (EPSU)
between the aft passenger/crew doors
(e) FOR [14WL] (EPSU)
between the forward emergency exit doors
(f) FOR [15WL] (EPSU)
between the forward emergency exit doors.
(2) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(b) FOR [11WL] (EPSU)
remove 251KC between the rear emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(c) FOR [12WL] (EPSU)
remove 251KC between the rear emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(d) FOR [14WL] (EPSU)
remove 231JC between the forward emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(e) FOR [15WL] (EPSU)
remove 231JC between the forward emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(3) Lower one side of the emergency oxygen container to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
- Disengage and lower one side of emergency oxygen container 33WR between the aft passenger/crew doors (Ref. AMM TASK 35-21-41-000-001).
- Do not disconnect the electrical connector of the emergency oxygen container.
C. Get Access
(1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [13WL] (EPSU)
between the aft passenger/crew doors.
(2) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(3) Remove the lower sidewall panel to get access to the emergency power supply unit:
(a) FOR [11WL] (EPSU)
remove 241KW at the left emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(b) FOR [12WL] (EPSU)
remove 242KW at the right emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(4) Lower one side of the emergency oxygen container to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
Subtask 33-51-38-010-051-D ** ON A/C NOT FOR ALL (1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [13WL] (EPSU)
between the aft passenger/crew doors.
(2) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(3) Remove the lower sidewall panel to get access to the emergency power supply unit:
(a) FOR [11WL] (EPSU)
remove 241KW at the left emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(b) FOR [12WL] (EPSU)
remove 242KW at the right emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(4) Lower one side of the emergency oxygen container to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
- Disengage and lower one side of emergency oxygen container 33WR between the aft passenger/crew doors (Ref. AMM TASK 35-21-41-000-001).
NOTE: Do not disconnect the electrical connector of the emergency oxygen container.
C. Get Access
(1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [11WL] (EPSU)
between the aft emergency exit doors
(c) FOR [12WL] (EPSU)
between the aft emergency exit doors
(d) FOR [13WL] (EPSU)
between the aft passenger/crew doors.
(2) Remove the ceiling panel(s) to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(b) FOR [11WL] (EPSU)
remove 251KC between the aft emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(c) FOR [12WL] (EPSU)
remove 251KC between the aft emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(3) Remove the lower sidewall panel(s) to get access to the emergency power supply unit:
(a) FOR [16WL] (EPSU)
remove 242KW at the emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(b) FOR [17WL] (EPSU)
remove 241KW at the emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(4) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
remove ceiling panel 261CC between the aft passenger/crew doors (Ref. AMM TASK 25-23-42-000-002).
4. Procedure(1) Put the STEPLADDER 1.5 M (5 FT) in position:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
at the left forward passenger/crew door
(b) FOR [11WL] (EPSU)
between the aft emergency exit doors
(c) FOR [12WL] (EPSU)
between the aft emergency exit doors
(d) FOR [13WL] (EPSU)
between the aft passenger/crew doors.
(2) Remove the ceiling panel(s) to get access to the emergency power supply unit:
(a) FOR [10WL] (POWER-EMERGENCY SUPPLY)
remove 221BC at the left forward passenger/crew door (Ref. AMM TASK 25-23-42-000-001).
(b) FOR [11WL] (EPSU)
remove 251KC between the aft emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(c) FOR [12WL] (EPSU)
remove 251KC between the aft emergency exit doors (Ref. AMM TASK 25-23-41-000-001).
(3) Remove the lower sidewall panel(s) to get access to the emergency power supply unit:
(a) FOR [16WL] (EPSU)
remove 242KW at the emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(b) FOR [17WL] (EPSU)
remove 241KW at the emergency exit(s) (Ref. AMM TASK 25-23-44-000-001).
(4) Remove the ceiling panel to get access to the emergency power supply unit:
(a) FOR [13WL] (EPSU)
remove ceiling panel 261CC between the aft passenger/crew doors (Ref. AMM TASK 25-23-42-000-002).
Subtask 33-51-38-020-053-A
A. Removal of the Battery of the Emergency Power Supply Unit (EPSU)
(1) Remove the screws (3) from the battery (2).
(2) Carefully remove the battery (2) from the EPSU (1).
(1) Remove the screws (3) from the battery (2).
(2) Carefully remove the battery (2) from the EPSU (1).
Battery of the EPSU