Removal of the Ceiling Panels - Forward Utility Area
TASK 25-23-42-000-001-A
Removal of the Ceiling Panels - Forward Utility Area
1. Reason for the Job
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-23-42-861-050-A Subtask 25-23-42-010-058-A ** ON A/C NOT FOR ALL Subtask 25-23-42-865-050-A
Subtask 25-23-42-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:31:02 UTC
Removal of the Ceiling Panels - Forward Utility Area
1. Reason for the Job
NOTE: More than one person is necessary for this task.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | CAP - BLANKING |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 221AC, 221BC, 222BC |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 23-72-51-000-001-A | Removal of the Anti-Hijack-System Cameras |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
Subtask 25-23-42-861-050-A Subtask 25-23-42-010-058-A ** ON A/C NOT FOR ALL Subtask 25-23-42-865-050-A
C. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/CIDS/DEU B/ESS | 153RH | G03 |
| 49VU | LIGHTING/EMER LT/CABIN | 2WL | H06 |
| 49VU | LIGHTING/EMER LT/CABIN | 1WL | H05 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CABIN | 2WL | H04 |
| 49VU | LIGHTING/EMER LT/CABIN | 1WL | H03 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU B/NORM | 162RH | M08 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/DEU B/NORM | 162RH | M09 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM/CIDS/DEU B/BAT | 143RH | N12 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | LAV FWD-OCCUPIED | 1WJ | F01 |
| ** ON A/C ALL | |||
| 2000VU | LIGHT-CABIN-ENTRY | 308LG | J02 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | LAV FWD & MID-OCCUPIED | 1WJ | F01 |
Subtask 25-23-42-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Ceiling Panel (1)
(1) Hold the panel (1) in position and release the quick-release fasteners (15).
(2) Carefully remove the panel (1).
Subtask 25-23-42-020-052-A ** ON A/C NOT FOR ALL (1) Hold the panel (1) in position and release the quick-release fasteners (15).
(2) Carefully remove the panel (1).
B. Removal of the Ceiling Panel(s) (2) and/or (3)
(1) Be careful when you remove the ceiling panel(s) (2) and/or (3), because other furnishings decrease the available work area.
(2) Remove the assembly seal (13) from the mounting rail (14).
(3) Hold the panel(s) (2) and/or (3) in position and release the quick-release fasteners (15).
(4) Carefully remove the panel(s) (2) and/or (3).
Subtask 25-23-42-020-053-A ** ON A/C NOT FOR ALL (1) Be careful when you remove the ceiling panel(s) (2) and/or (3), because other furnishings decrease the available work area.
(2) Remove the assembly seal (13) from the mounting rail (14).
(3) Hold the panel(s) (2) and/or (3) in position and release the quick-release fasteners (15).
(4) Carefully remove the panel(s) (2) and/or (3).
C. Removal of the Ceiling Panel(s) (4) and/or (7)
(1) Remove the assembly seal (13) from the mounting rail (14).
(2) Carefully move the ceiling panel(s) (4) and/or (7) inboard and off the mounting rail (14).
(3) Lower the inboard edge(s) of the ceiling panel(s) (4) and/or (7) and pull the outboard edge(s) out of the mounting bracket.
(4) Carefully remove the ceiling panel(s) (4) and/or (7).
Subtask 25-23-42-020-060-A ** ON A/C NOT FOR ALL (1) Remove the assembly seal (13) from the mounting rail (14).
(2) Carefully move the ceiling panel(s) (4) and/or (7) inboard and off the mounting rail (14).
(3) Lower the inboard edge(s) of the ceiling panel(s) (4) and/or (7) and pull the outboard edge(s) out of the mounting bracket.
(4) Carefully remove the ceiling panel(s) (4) and/or (7).
D. Removal of the Ceiling Panel (5) and the Trim Panel (6)
(1) Remove the assembly seal (13) from the mounting rail (14).
(2) Carefully remove the ceiling panel (5) from the mounting rail (14).
(3) Do the next steps through the openings where the ceiling panels (4), (7) and (5) were installed:
(a) Disconnect the electric connector (8).
(b) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(c) Hold the trim panel (6) and remove the nuts (11), the bolts (9) and the washers (10).
(4) Carefully remove the trim panel (6) from the mounting structure (12).
Subtask 25-23-42-020-050-B ** ON A/C NOT FOR ALL (1) Remove the assembly seal (13) from the mounting rail (14).
(2) Carefully remove the ceiling panel (5) from the mounting rail (14).
(3) Do the next steps through the openings where the ceiling panels (4), (7) and (5) were installed:
(a) Disconnect the electric connector (8).
(b) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(c) Hold the trim panel (6) and remove the nuts (11), the bolts (9) and the washers (10).
(4) Carefully remove the trim panel (6) from the mounting structure (12).
E. Removal of the Ceiling Panel (1)
(1) Remove the caps (10).
(2) Hold ceiling panel 221AC (1) and release the quick-release fasteners (9).
(3) Carefully remove ceiling panel 221AC (1).
Subtask 25-23-42-020-052-B ** ON A/C NOT FOR ALL (1) Remove the caps (10).
(2) Hold ceiling panel 221AC (1) and release the quick-release fasteners (9).
(3) Carefully remove ceiling panel 221AC (1).
F. Removal of the Ceiling Panels (2) and (6)
(1) Be careful when you remove ceiling panels 221BC (2) and 222BC (6) because other furnishings decrease the available work area.
(2) Remove the section hose (7) from the mounting rails (8).
(3) Hold ceiling panels 221BC (2) and 222BC (6) and release the quick-release fasteners (9).
(4) Release panel 221BC (2) and 222BC (6) from the mounting rails (8).
(5) Carefully remove ceiling panels 221BC (2) and 222BC (6).
Subtask 25-23-42-020-053-B ** ON A/C NOT FOR ALL (1) Be careful when you remove ceiling panels 221BC (2) and 222BC (6) because other furnishings decrease the available work area.
(2) Remove the section hose (7) from the mounting rails (8).
(3) Hold ceiling panels 221BC (2) and 222BC (6) and release the quick-release fasteners (9).
(4) Release panel 221BC (2) and 222BC (6) from the mounting rails (8).
(5) Carefully remove ceiling panels 221BC (2) and 222BC (6).
G. Removal of the Ceiling Panels (3) and (5)
(1) Remove the section hose (7) from the mounting rails (8).
(2) Hold the ceiling panels (3) and (5) and release the quick-release fasteners (9).
(3) Release the ceiling panels (3) and (5) from the mounting rails (8).
(4) Carefully remove the ceiling panels (3) and (5).
Subtask 25-23-42-020-060-B ** ON A/C NOT FOR ALL (1) Remove the section hose (7) from the mounting rails (8).
(2) Hold the ceiling panels (3) and (5) and release the quick-release fasteners (9).
(3) Release the ceiling panels (3) and (5) from the mounting rails (8).
(4) Carefully remove the ceiling panels (3) and (5).
H. Removal of the Ceiling Panel (4)
(1) Remove the section hose (7) from the mounting rails (8).
(2) Release the ceiling panel (4) from the mounting rails (8) and remove it.
(1) Remove the section hose (7) from the mounting rails (8).
(2) Release the ceiling panel (4) from the mounting rails (8) and remove it.
Ceiling Panels Forward Utility Area