LAST LEG REPORT Test of the DMC

TASK 31-60-00-740-006-A
LAST LEG REPORT Test of the DMC

ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-32-00-860-008-A	Procedure to Get Access to the SYSTEM REPORT/TEST/INST Page
TASK 31-60-00-860-001-A	EIS Start Procedure
TASK 31-60-00-860-002-A	EIS Stop Procedure

3. Job Set-up
Subtask 31-60-00-860-075-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
(2) Do the EIS start procedure (Ref. AMM TASK 31-60-00-860-001)
(3) On the MCDU, get the SYSTEM REPORT/TEST INST menu page (Ref. AMM TASK 31-32-00-860-008)

4. Procedure
Subtask 31-60-00-740-057-A ** ON A/C NOT FOR ALL

A. LAST LEG REPORT TEST of the DMC1 (2 or 3)

ACTION	RESULT
1. On the MCDU: - press the line key adjacent to the EIS1 (2 or 3) indication	- the DMC1 (2 or 3) main menu page comes into view
- press the line key adjacent to the LAST LEG REPORT indication	- the page DMC1 (2 or 3) LAST LEG REPORT with the date comes into view
- make sure that NO FAULT DETECTED is displayed under the title LAST LEG REPORT and press the line key adjacent to the RETURN indication

5. Close-up
Subtask 31-60-00-860-076-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) On the MCDU, push the line key adjacent to the RETURN indication until the MAINTENANCE MENU 1/2 page comes into view
(2) Do the EIS Stop Procedure (Ref. AMM TASK 31-60-00-860-002)
(3) On the MCDU, set the BRT knob to OFF
(4) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)

[Rev.10 from 2021] 2026.04.01 00:38:03 UTC