Removal of Ionic Smoke Detector for Cleaning in Workshop
TASK 26-15-00-100-002-A
Removal of Ionic Smoke Detector for Cleaning in Workshop
Refer to the MPD TASK: 261500-04
REMOVAL OF IONIC SMOKE DETECTOR FOR FOR CLEANING IN SHOP
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 26-15-00-861-053-A Subtask 26-15-00-865-056-A
Subtask 26-15-00-020-051-A Subtask 26-15-00-110-050-A
Subtask 26-15-00-865-057-A
[Rev.10 from 2021]
2026.03.31 23:43:46 UTC
Removal of Ionic Smoke Detector for Cleaning in Workshop
ZONE: 128
1. Reason for the JobRefer to the MPD TASK: 261500-04
REMOVAL OF IONIC SMOKE DETECTOR FOR FOR CLEANING IN SHOP
NOTE: This task is applicable only on aircraft with ionic smoke detector installed.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 128 | REAR AVIONIC COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 26-15-00-710-001-A | Operational Test of the Avionics Smoke Detection |
| TASK 26-15-15-000-001-A | Removal of the Smoke Detector - Avionics Compartment |
| TASK 26-15-15-400-001-A | Installation of the Smoke Detector - Avionics Compartment |
Subtask 26-15-00-861-053-A Subtask 26-15-00-865-056-A
B. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | AIR COND/AVNCS VENT/CTL | 5HQ | D05 |
Subtask 26-15-00-020-051-A Subtask 26-15-00-110-050-A
B. Send the smoke detector 1WA to the workshop.
Subtask 26-15-00-420-051-A C. Install a serviceable smoke detector 1WA in the avionics compartment (Ref. AMM TASK 26-15-15-400-001).
5. Close-upSubtask 26-15-00-865-057-A
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 26-15-00-710-053-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | AIR COND/AVNCS VENT/CTL | 5HQ | D05 |
B. Operational Test
(1) Do the operational test of the avionics smoke detection system (Ref. AMM TASK 26-15-00-710-001).
Subtask 26-15-00-410-052-A (1) Do the operational test of the avionics smoke detection system (Ref. AMM TASK 26-15-00-710-001).
C. Make sure that the work area is clean and clear of tools and other items.
Subtask 26-15-00-862-053-A