W DOC AIRBUS | AMM A320F

Installation of the Loudspeaker

TASK 23-73-51-400-002-A
Installation of the Loudspeaker

WARNING: BE VERY CAREFUL WHEN YOU DO WORK ON CIRCUIT BREAKER PANELS. THERE IS A HIGH VOLTAGE BEHIND THESE PANELS.
ZONE: 200
1. Reason for the Job
Self Explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
98A25208001000
1
PULLEY ASSY-SEALING
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
200
UPPER HALF FUSELAGE
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 23-73-00-710-036-A
Operational Test of the Loudspeaker through the MCDU
TASK 23-73-00-740-005-A
BITE-Test of the Cabin Intercommunication Data System (CIDS) through the CFDS
TASK 23-73-00-740-005-B
Interface and Power-Up Test of the Cabin Intercommunication Data System (CIDS) through the CFDS
TASK 23-73-00-861-001-A
Energize the Cabin Intercommunication Data System (CIDS)
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A
De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01
De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02
De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
F Loudspeaker of the PSIU ** ON A/C NOT FOR ALL
F Loudspeaker in the PSIU ** ON A/C NOT FOR ALL
F Loudspeaker of the circuit breaker panel 2001VU
F Loudspeaker in the lavatory
F Loudspeaker in the space flex lavatory ** ON A/C NOT FOR ALL
3. Job Set-up
Subtask 23-73-51-860-050-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
   (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
   (2) For loudspeaker in the PSIU:
  • Make sure that the applicable PSIU is open.
   (3) For loudspeaker of the circuit panel 2001VU:
  • Make sure that the circuit breaker panel 2001VU hangs on the detent hook.
   (4) For loudspeaker in the lavatories:
  • Make sure that the service cabinet door is open and where applicable the service cabinet is removed.
Subtask 23-73-51-860-050-C ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
   (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
   (2) For the loudspeaker in the PSIU:
  • Make sure that the applicable PSIU is open.
   (3) For the loudspeaker of the circuit panel 2001VU:
  • Make sure that the circuit breaker panel 2001VU hangs on the detent hook.
   (4) For the loudspeaker in the lavatories:
  • Make sure that the service cabinet door is open and where applicable the service cabinet is removed.
   (5) For the loudspeaker in the space flex lavatories:
  • Make sure that the applicable air-extraction panel is open.
Subtask 23-73-51-865-077-A
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/LINE 2155RHG05
49VUCOM/CIDS/DEU A ESS/LINE 1154RHG04
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/AFT R172RHHA12
49VUCOM/CIDS/DEU A ESS/AFT L179RHHA11
49VUCOM/CIDS/DEU A ESS/FWD R158RHHA10
49VUCOM/CIDS/DEU A ESS/FWD L159RHHA09
** ON A/C NOT FOR ALL
49VUCOM / CIDS / DEU A ESS / MID R196RHG05
49VUCOM / CIDS / DEU A ESS / MID L195RHG04
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/2 R466RHHA12
49VUCOM/CIDS/DEU A ESS/2 L465RHHA11
49VUCOM/CIDS/DEU A ESS/1 R464RHHA10
49VUCOM/CIDS/DEU A ESS/1 L463RHHA09
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R AFT168RHM14
121VUCOM NAV/CIDS/DEU A NORM/L AFT167RHM13
121VUCOM NAV/CIDS/DEU A NORM/R MID166RHM12
121VUCOM NAV/CIDS/DEU A NORM/L MID165RHM11
121VUCOM/CIDS/DEU A BAT/LINE 2145RHN14
121VUCOM/CIDS/DEU A BAT/LINE 1144RHN13
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R FWD164RHM10
121VUCOM NAV/CIDS/DEU A NORM/L FWD163RHM09
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R AFT168RHM12
121VUCOM NAV/CIDS/DEU A NORM/L AFT167RHM11
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R FWD164RHM11
121VUCOM NAV/CIDS/DEU A NORM/L FWD163RHM10
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R AFT668RHM14
121VUCOM NAV/CIDS/DEU A NORM/L AFT667RHM13
121VUCOM NAV/CIDS/DEU A NORM/R MID666RHM12
121VUCOM NAV/CIDS/DEU A NORM/L MID665RHM11
121VUCOM NAV/CIDS/DEU A NORM/R FWD664RHM10
121VUCOM NAV/CIDS/DEU A NORM/L FWD663RHM09
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R MID166RHM13
121VUCOM NAV/CIDS/DEU A NORM/L MID165RHM12
** ON A/C NOT FOR ALL
121VUCOM/CIDS/DEU A BAT/FWD R258RHN14
121VUCOM/CIDS/DEU A BAT/L FWD259RHN13
121VUCOM/CIDS/DEU A BAT/AFT R272RHQ11
121VUCOM/CIDS/DEU A BAT/AFT L279RHQ10
** ON A/C NOT FOR ALL
121VUDEU A BAT MID R296RHM13
121VUDEU A BAT MID L295RHM12
** ON A/C NOT FOR ALL
2001VUCIDS-DEU A NORM-AFT-RH174RHC07
2001VUCIDS-DEU A NORM-AFT-LH173RHC06
2001VUCIDS-DEU A NORM-MID-RH198RHC05
2001VUCIDS-DEU A NORM-MID-LH197RHC04
** ON A/C NOT FOR ALL
2001VUCIDS/ DEU A NORM AFT RH174RHC08
2001VUCIDS/ DEU A NORM AFT LH173RHC07
2001VUCIDS/ DEU A NORM MID 2 RH176RHC06
2001VUCIDS/ DEU A NORM MID 2 LH175RHC05
4. Procedure
Subtask 23-73-51-420-050-A ** ON A/C NOT FOR ALL
A. Installation of the loudspeaker
   (1) Install the loudspeaker in the PSIU and in the forward entrance area
F Loudspeaker of the PSIU ** ON A/C NOT FOR ALL
     (a) Clean the component interfaces and the adjacent area.
     (b) Do an inspection of the component interfaces and the adjacent area.
     (c) Install the loudspeaker (2) in the PSIU (6) and make sure that the loudspeaker locks in position.
     (d) Connect the electrical connections (1) to the loudspeaker electrical connectors (7).
     (e) Make sure that the work area is clean and clear of tools and other items.
     (f) Install the section hose (4) with the 98A25208001000 PULLEY ASSY-SEALING to the mounting rail (5).

NOTE: Make sure that the section hose is not expanded. Move the pulley assembly forward and rearward to the prevent this.
   (2) Install the loudspeaker in the aft entrance area
F Loudspeaker of the PSIU ** ON A/C NOT FOR ALL
     (a) Clean the component interfaces and the adjacent area.
     (b) Do an inspection of the component interfaces and the adjacent area.
     (c) Install the loudspeaker (2) with the screws (8) and the washers (9).
     (d) Connect the electrical connections (1) to the loudspeaker electrical connectors (7).
     (e) Make sure that the work area is clean and clear of tools and other items.
     (f) Install the section hose (4) with the 98A25208001000 PULLEY ASSY-SEALING to the mounting rail (5).

NOTE: Make sure that the section hose is not expanded. Move the pulley assembly forward and rearward to the prevent this.
Subtask 23-73-51-420-050-B ** ON A/C NOT FOR ALL
A. Installation of the loudspeaker
   (1) Install the loudspeaker in the PSIU and in the forward/aft entrance area
F Loudspeaker in the PSIU ** ON A/C NOT FOR ALL
Clean the component interfaces and the adjacent area.
Do an inspection of the component interfaces and the adjacent area.
     (a) Install the loudspeaker (4) on the pins (7) of the PSIU (3).
CAUTION: REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN YOU CONNECT THE ELECTRICAL WIRES. INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO EQUIPMENT.
     (b) Make sure that the spring clips (6) lock in position with a click.
     (c) Connect the electrical connectors (5) to the loudspeaker (4).
     (d) Make sure that the work area is clean and clear of tools and other items.
     (e) Install the section hose (1) with the 98A25208001000 PULLEY ASSY-SEALING to the mounting rail (2).

NOTE: Make sure that the section hose is not expanded. Move the pulley assembly forward and rearward to the prevent this.
Subtask 23-73-51-420-064-A
B. Installation of the loudspeaker
   (1) Install the loudspeaker in the circuit breaker panel 2001VU
F Loudspeaker of the circuit breaker panel 2001VU
     (a) Clean the component interfaces and the adjacent area.
     (b) Do an inspection of the component interfaces and the adjacent area.
     (c) Install the loudspeaker (6) with the screws (7) and the washers (8).
     (d) Connect the electrical connections (1) to the electrical connectors (2).
     (e) Install the circuit breaker panel 2001VU (4) with the quick release fasteners (3).
Subtask 23-73-51-420-065-B
C. Installation of the loudspeaker
   (1) Install the lavatory loudspeaker
F Loudspeaker in the lavatory
     (a) Clean the component interfaces and the adjacent area.
     (b) Do an inspection of the component interfaces and the adjacent area.
     (c) Install the loudspeaker (6) on the pins (7).
     (d) Make sure that the loudspeaker (6) locks in position.
     (e) Connect the electrical connectors (5) to the loudspeaker (6).

NOTE: Make sure that you connect the electrical connector with the + mark to the loudspeaker connection with the red mark.
     (f) Lift the service cabinet (4), hold it, connect the flexible hose (11) and tighten the screw (10).
     (g) Put the service cabinet (4) in position and install the screws (2) and the washers (3).
     (h) Install the service cabinet door (1) with the screws (8).
     (i) Make sure that the work area is clean and clear of tools and other items.
     (j) Install the service box (9).
     (k) Close the service cabinet door (1).
Subtask 23-73-51-420-067-A ** ON A/C NOT FOR ALL
D. Installation of the loudspeaker
   (1) Install the loudspeaker in the space flex lavatory
F Loudspeaker in the space flex lavatory ** ON A/C NOT FOR ALL
     (a) Clean the component interfaces and the adjacent area.
     (b) Do an inspection of the component interfaces and the adjacent area.
     (c) Make sure that the parts retained from the removed component are clean and in the correct condition.
     (d) Put the loudspeaker (6) in position on the grill (7) and install the washers (4) and screws (3).
     (e) Remove the CAP-BLANKING from each electrical connector and receptacle.
CAUTION: MAKE SURE THAT THE ELECTRICAL CONNECTORS ARE CLEAN BEFORE YOU DISCONNECT OR CONNECT THEM. CONTAMINATION ON THE ELECTRICAL CONNECTORS CAN CAUSE DAMAGE TO EQUIPMENT.
     (f) Connect the electrical connectors (5) to the loudspeaker (6).
     (g) Close the air-extraction panel (1).
Subtask 23-73-51-865-051-A
E. Remove the safety clips and tags and close these circuit breakers in this sequence:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2001VUCIDS-DEU A NORM-MID-RH198RHC05
2001VUCIDS-DEU A NORM-MID-LH197RHC04
** ON A/C NOT FOR ALL
2001VUCIDS/ DEU A NORM MID 2 RH176RHC06
2001VUCIDS/ DEU A NORM MID 2 LH175RHC05
** ON A/C NOT FOR ALL
2001VUCIDS-DEU A NORM-AFT-RH174RHC07
** ON A/C NOT FOR ALL
2001VUCIDS/ DEU A NORM AFT RH174RHC08
** ON A/C NOT FOR ALL
2001VUCIDS-DEU A NORM-AFT-LH173RHC06
** ON A/C NOT FOR ALL
2001VUCIDS/ DEU A NORM AFT LH173RHC07
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R AFT168RHM12
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R AFT168RHM14
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L AFT167RHM11
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L AFT167RHM13
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R MID166RHM13
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R MID166RHM12
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L MID165RHM12
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L MID165RHM11
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R FWD164RHM11
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/R FWD164RHM10
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L FWD163RHM10
** ON A/C NOT FOR ALL
121VUCOM NAV/CIDS/DEU A NORM/L FWD163RHM09
** ON A/C NOT FOR ALL
49VUCOM / CIDS / DEU A ESS / MID R196RHG05
49VUCOM / CIDS / DEU A ESS / MID L195RHG04
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/AFT L179RHHA11
49VUCOM/CIDS/DEU A ESS/AFT R172RHHA12
49VUCOM/CIDS/DEU A ESS/FWD L159RHHA09
49VUCOM/CIDS/DEU A ESS/FWD R158RHHA10
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/LINE 2155RHG05
49VUCOM/CIDS/DEU A ESS/LINE 1154RHG04
** ON A/C NOT FOR ALL
121VUDEU A BAT MID R296RHM13
121VUDEU A BAT MID L295RHM12
** ON A/C NOT FOR ALL
121VUCOM/CIDS/DEU A BAT/AFT L279RHQ10
121VUCOM/CIDS/DEU A BAT/AFT R272RHQ11
121VUCOM/CIDS/DEU A BAT/L FWD259RHN13
121VUCOM/CIDS/DEU A BAT/FWD R258RHN14
** ON A/C NOT FOR ALL
121VUCOM/CIDS/DEU A BAT/LINE 2145RHN14
121VUCOM/CIDS/DEU A BAT/LINE 1144RHN13
** ON A/C NOT FOR ALL
49VUCOM/CIDS/DEU A ESS/2 R466RHHA12
49VUCOM/CIDS/DEU A ESS/1 R464RHHA10
49VUCOM/CIDS/DEU A ESS/1 L463RHHA09
49VUCOM/CIDS/DEU A ESS/2 L465RHHA11
121VUCOM NAV/CIDS/DEU A NORM/R AFT668RHM14
121VUCOM NAV/CIDS/DEU A NORM/R MID666RHM12
121VUCOM NAV/CIDS/DEU A NORM/R FWD664RHM10
121VUCOM NAV/CIDS/DEU A NORM/L FWD663RHM09
121VUCOM NAV/CIDS/DEU A NORM/L MID665RHM11
121VUCOM NAV/CIDS/DEU A NORM/L AFT667RHM13
Subtask 23-73-51-869-062-A ** ON A/C NOT FOR ALL
F. Aircraft Maintenance Configuration
   (1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).
   (2) Do the BITE test of the Cabin Intercommunication Data System (CIDS) (Ref. AMM TASK 23-73-00-740-005).
Subtask 23-73-51-869-062-B ** ON A/C NOT FOR ALL
F. Aircraft Maintenance Configuration
   (1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).
   (2) Do the Interface and Power-Up test of the Cabin Intercommunication Data System (CIDS) (Ref. AMM TASK 23-73-00-740-005).
Subtask 23-73-51-710-059-B ** ON A/C NOT FOR ALL
G. Do this test
ACTION
RESULT
1.In the cabin, on the Programming and Test Panel (PTP) 110RH:
On the PTP:
  • push the DISPL ON membrane switch.
  • the CIDS menu page shows.
  • push the SYSTEM TEST related membrane switch.
  • the SYSTEM TEST page shows.
  • push the CONT related membrane switch until the message 'LOUDSPEAKERS' shows.

  • push the LOUDSPEAKERS related membrane switch.
  • the LOUDSPEAKERS TEST page shows.

NOTE: At some seat rows the passenger call and seat row numbering lights can go off.
  • push the LOUDSPEAKER ON related membrane switch.


In the cabin, in all lavatories and at all attendant stations:
  • you hear a tone.
  • push the RET related membrane switch.
  • the tone stops.
  • push the CONT related membrane switch.
On the PTP:
  • push the PAX CALL LAMPS related membrane switch.
  • the PAX CALL LAMPS TEST page shows.

  • after some seconds the page shows the message:
    'PAX CALL LAMPS'
    'ATA 23-73-14'
    'TEST OK'.



In the cabin:

  • all extinguished passenger call and seat row numbering lights come on.
Subtask 23-73-51-710-066-A ** ON A/C NOT FOR ALL
H. Do this test
Do the operational test of loudspeaker through the MCDU.
(Ref. AMM TASK 23-73-00-710-036)
5. Close-up
Subtask 23-73-51-862-050-A
A. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)
[Rev.10 from 2021] 2026.04.01 06:20:25 UTC
"Aviabrain" 2025