Operational Test of the Printer

TASK 31-35-00-710-001-A
Operational Test of the Printer

ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-35-22-600-001-A	Servicing of the Printer

3. Job Set-up
Subtask 31-35-00-860-050-A

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the printer contains paper.

NOTE: If not, put paper in the printer (Ref. AMM TASK 31-35-22-600-001).

Subtask 31-35-00-865-050-A

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J21
121VU	CFDS/CFDIU/SPLY	2TW	J18
121VU	CFDS/CFDIU/BACK/UP	8TW	J17
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J44
121VU	CFDS/CFDIU/SPLY	2TW	J41
121VU	CFDS/CFDIU/BACK/UP	8TW	J40

4. Procedure
Subtask 31-35-00-710-050-A

A. Test

ACTION	RESULT
1.Adjust the brightness of the MCDU 1 screen.	On the MCDU1: The MCDU is on.
2.On the MCDU1: push the line key adjacent to the CFDS indication.	On the MCDU1: the CFDS menu comes into view.
3.On the MCDU1: push the line key adjacent to the LAST LEG REPORT indication.	On the MCDU1: the LAST LEG REPORT page comes into view.
4.On the MCDU1: push the line key adjacent to the PRINT indication.	On the printer: the printer prints the MCDU page. NOTE: Make sure that the printed page agrees with the page on the MCDU.
5.On the MCDU1: push the line key adjacent to the RETURN indication until the CFDS MENU page comes into view.

5. Close-up
Subtask 31-35-00-860-051-A

A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
(2) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 04:25:12 UTC