Installation of the Overhead Control and Indicating Panel

TASK 31-14-25-400-001-A
Installation of the Overhead Control and Indicating Panel

ZONE: 210
FIN: 25VU

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-10-00-700-001-A	Test Program after Removal/Installation of a VU Panel

3. Job Set-up
Subtask 31-14-25-862-051-A

A. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)

4. Procedure
Subtask 31-14-25-400-051-A

A. Installation of the Overhead Control and Indicating Panel
(1) Clean the component interface and/or the adjacent area.
(2) Do a visual inspection of the component interface and/or the adjacent area.
(3) Remove the shunt from the connector 2423VC.
(4) Remove the blanking caps from the electrical connectors (1), (3), (4), (5).
(5) Make sure that the electrical connectors are clean and in the correct condition.
(6) Connect the electrical connectors.
(7) Install the panel 25VU in its housing.
(8) Tighten the four quarter-turn fasteners.

Subtask 31-14-25-861-052-A

B. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).

Subtask 31-14-25-710-051-A

C. Test
Do the test program of the panel 25VU (Ref. AMM TASK 31-10-00-700-001).

[Rev.10 from 2021] 2026.04.01 00:33:15 UTC