DOC AIRBUS | AMM A320FGeneral Repair Information
TASK 25-80-00-200-001-A
General Repair Information
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 25-80-00-861-050-A 4. Procedure
Subtask 25-80-00-210-053-A
Subtask 25-80-00-410-055-A
[Rev.10 from 2021]
2026.03.31 23:42:01 UTC
General Repair Information
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | GLOVES - RUBBER |
| No specific | 1 | GOGGLES - PROTECTIVE |
| No specific | 1 | PROTECTIVE BREATHING EQUIPMENT |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.14HQB1) | Film-Insulation covering - - |
| (Material No.14HQD1) | Film-Insulation covering Flame Penetration Resistant - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 25-80-00-000-001-A | Removal of the Insulation Blankets |
| TASK 25-80-00-350-001-A | Repair of the Wrapper |
| TASK 25-80-00-350-002-A | Repair with Rework Patch |
| TASK 25-80-00-400-001-A | Installation of the Insulation Blankets |
Subtask 25-80-00-861-050-A 4. Procedure
Subtask 25-80-00-210-053-A
A. General Information
(1) Identify the damage type
General Identification Chart ** ON A/C NOT FOR ALL
General Identification Chart ** ON A/C NOT FOR ALL
Subtask 25-80-00-010-056-A (1) Identify the damage type
General Identification Chart ** ON A/C NOT FOR ALL General Identification Chart ** ON A/C NOT FOR ALL B. Removal of the Insulation Blanket
(a) Remove the damaged insulation blanket if necessary (Ref. AMM TASK 25-80-00-000-001).
Subtask 25-80-00-350-050-A ** ON A/C NOT FOR ALL WARNING:
YOU MUST ALWAYS WEAR RUBBER GLOVES WHEN YOU DO THIS PROCEDURE.
(1) If you must remove a contaminated blanket put on the GOGGLES - PROTECTIVE, the GLOVES - RUBBER and use the correct PROTECTIVE BREATHING EQUIPMENT. (a) Remove the damaged insulation blanket if necessary (Ref. AMM TASK 25-80-00-000-001).
C. Repair of the Damaged Insulation
(1) Do the repair of the damaged insulation blanket:
Subtask 25-80-00-350-050-B ** ON A/C NOT FOR ALL (1) Do the repair of the damaged insulation blanket:
- Repair the wrapper (Ref. AMM TASK 25-80-00-350-001).
C. Repair of the Damaged Insulation Blanket
(1) Repair of the Damaged Insulation Blanket above Stringer 19 and below Stringer 19 on the Inboard Side:
(2) Repair of the Damaged Insulation Blanket below Stringer 19 on the Outboard Side:
5. Close-up(1) Repair of the Damaged Insulation Blanket above Stringer 19 and below Stringer 19 on the Inboard Side:
NOTE: Film-Insulation covering - - (Material No.14HQB1) is on the inboard and outboard side of the insulation blankets above the stringer 19 level. It is also on the inboard side of the insulation blankets below the stringer 19 level.
(a) Do the repair of the damaged insulation blanket: - Repair the wrapper (Ref. AMM TASK 25-80-00-350-001).
(2) Repair of the Damaged Insulation Blanket below Stringer 19 on the Outboard Side:
NOTE: Film-Insulation covering Flame Penetration Resistant - (Material No.14HQD1) is on the outboard side of the insulation blankets below the stringer 19 level.
(a) Do the repair of the damaged insulation blanket: - Repair the insulation blanket with a rework patch (Ref. AMM TASK 25-80-00-350-002).
Subtask 25-80-00-410-055-A
A. Installation of the Insulation Blanket
(1) Install the repaired insulation blanket if removed to do the repair procedure (Ref. AMM TASK 25-80-00-400-001).
Subtask 25-80-00-862-050-A (1) Install the repaired insulation blanket if removed to do the repair procedure (Ref. AMM TASK 25-80-00-400-001).