Installation of the Reading Light Switch-Card
TASK 23-73-38-400-803-A
Installation of the Reading Light Switch-Card
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 23-73-38-861-059-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 23-73-38-420-053-A ** ON A/C NOT FOR ALL
Subtask 23-73-38-862-055-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 05:39:01 UTC
Installation of the Reading Light Switch-Card
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 23-73-45-400-001-A | Installation of the Passenger Service Unit |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 23-73-38-861-059-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 23-73-38-420-053-A ** ON A/C NOT FOR ALL
A. Installation of the Reading Light Switch-Card
(1) Install the reading light switch-card (3) in its position in the Passenger Service Unit (PSU) (1).
(2) Make sure that the socket (7) is in the correct position.
(3) Put the two plastic catches into the holes (4) of the reading light switch-card (3) make sure that they lock correctly.
(4) Connect and lock the related connector (6) to the card socket (7).
(5) Carefully lock the drip water cover (2) on the reading light switch-card (3).
(6) Repeat steps 1 thru 5 for each reading light switch-card (3).
(7) Install the PSU (1). (Ref. AMM TASK 23-73-45-400-001)
(8) Make sure that the work area is clean and clear of tools and other items.
Subtask 23-73-38-865-073-A ** ON A/C NOT FOR ALL (1) Install the reading light switch-card (3) in its position in the Passenger Service Unit (PSU) (1).
(2) Make sure that the socket (7) is in the correct position.
(3) Put the two plastic catches into the holes (4) of the reading light switch-card (3) make sure that they lock correctly.
(4) Connect and lock the related connector (6) to the card socket (7).
(5) Carefully lock the drip water cover (2) on the reading light switch-card (3).
(6) Repeat steps 1 thru 5 for each reading light switch-card (3).
(7) Install the PSU (1). (Ref. AMM TASK 23-73-45-400-001)
(8) Make sure that the work area is clean and clear of tools and other items.
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
5. Close-up| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | PASSENGER READING LIGHT | 6LW | G06 |
| 2000VU | PASSENGER READING LIGHT | 5LW | G05 |
| 2000VU | PASSENGER READING LIGHT | 4LW | G04 |
| 2000VU | PASSENGER READING LIGHT | 1LW | G01 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | PASSENGER READING LIGHT | 2LW | G02 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | PASSENGER READING LIGHT | 3LW | G03 |
| ** ON A/C NOT FOR ALL | |||
| 2000VU | PASSENGER/READING/LIGHT | 2LW | G02 |
Subtask 23-73-38-862-055-A ** ON A/C NOT FOR ALL
Reading Light Switch-Card - Removal/Installation