Installation of the Cabin Assignment Module

TASK 23-73-19-400-002-A
Installation of the Cabin Assignment Module

FIN: 115RH ** ON A/C NOT FOR ALL

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 23-73-00-860-002-A	Cabin Layout Selection
TASK 23-73-00-861-001-A	Energize the Cabin Intercommunication Data System (CIDS)
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
Cabin Assignment Module (115RH) - Removal/Installation

3. Job Set-up
Subtask 23-73-19-861-053-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)

Subtask 23-73-19-865-058-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
49VU	COM/CIDS/DIR ESS/2	157RH	G02
** ON A/C NOT FOR ALL
49VU	COM/CIDS/DIR ESS/1	150RH	G01
49VU	COM/CIDS/FLT ATTND PNL/ESS	171RH	H01
** ON A/C NOT FOR ALL
49VU	COM DIR ESS/2	157RH	G02
** ON A/C NOT FOR ALL
49VU	COM/CIDS/FLT ATTND PNL/ESS	171RH	G03
49VU	COM NAV/CIDS/DIR2 ESS	157RH	G02
49VU	COM NAV/CIDS/DIR1 ESS	150RH	G01
** ON A/C NOT FOR ALL
121VU	COM CIDS FWD ATTND PNL	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/2	156RH	M06
121VU	COM NAV/CIDS/DIR NORM/1	151RH	M05
** ON A/C NOT FOR ALL
121VU	COM/FAP1/NORM	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/2	156RH	M07
121VU	COM NAV/CIDS/DIR NORM/1	151RH	M06
121VU	COM NAV/CIDS/FWD ATTND/PNL	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR2 NORM	156RH	M06
121VU	COM NAV/CIDS/DIR1 NORM	151RH	M05
121VU	COM/CIDS/FWD ATTND PNL/BAT	149RH	Q13
** ON A/C NOT FOR ALL
121VU	COM/CIDS/FLT ATTND PANL/BAT	149RH	Q13
** ON A/C NOT FOR ALL
121VU	COM/CIDS/DIR 2/BAT	146RH	P14
121VU	COM/CIDS/DIR 1/BAT	147RH	P13

4. Procedure
Subtask 23-73-19-420-051-A ** ON A/C NOT FOR ALL

A. Installation of the Cabin Assignment Module (CAM)

Cabin Assignment Module (115RH) - Removal/Installation ** ON A/C NOT FOR ALL

(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Push the CAM (4) carefully into the respective slot, the CAM slot (5), until it locks in position.

NOTE: The I-PRAM, CAM and OBRM slot has the same dimensions. Thus it is mandatory to push the Compact Flashcard into the correct slot.

(4) Make sure that the work area is clean and clear of tools and other items.
(5) Close the cover (2) and the quick-release fastener (1).

Subtask 23-73-19-865-059-A ** ON A/C NOT FOR ALL

B. Remove the safety clips and tags and close these circuit breakers in this sequence:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	COM CIDS FWD ATTND PNL	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM/FAP1/NORM	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/FWD ATTND/PNL	170RH	Q14
** ON A/C NOT FOR ALL
49VU	COM/CIDS/FLT ATTND PNL/ESS	171RH	H01
** ON A/C NOT FOR ALL
49VU	COM/CIDS/FLT ATTND PNL/ESS	171RH	G03
** ON A/C NOT FOR ALL
121VU	COM/CIDS/FLT ATTND PANL/BAT	149RH	Q13
** ON A/C NOT FOR ALL
121VU	COM/CIDS/FWD ATTND PNL/BAT	149RH	Q13
121VU	COM NAV/CIDS/DIR2 NORM	156RH	M06
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/2	156RH	M07
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/2	156RH	M06
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR1 NORM	151RH	M05
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/1	151RH	M06
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/DIR NORM/1	151RH	M05
** ON A/C NOT FOR ALL
49VU	COM NAV/CIDS/DIR2 ESS	157RH	G02
** ON A/C NOT FOR ALL
49VU	COM/CIDS/DIR ESS/2	157RH	G02
** ON A/C NOT FOR ALL
49VU	COM DIR ESS/2	157RH	G02
** ON A/C NOT FOR ALL
49VU	COM NAV/CIDS/DIR1 ESS	150RH	G01
** ON A/C NOT FOR ALL
49VU	COM/CIDS/DIR ESS/1	150RH	G01
** ON A/C NOT FOR ALL
121VU	COM/CIDS/DIR 1/BAT	147RH	P13
121VU	COM/CIDS/DIR 2/BAT	146RH	P14

Subtask 23-73-19-869-052-A ** ON A/C NOT FOR ALL

C. Aircraft Maintenance Configuration
(1) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).

Subtask 23-73-19-740-051-A ** ON A/C NOT FOR ALL

D. Make sure that the required cabin layout is selected in the CAM
(Ref. AMM TASK 23-73-00-860-002).

5. Close-up
Subtask 23-73-19-862-051-A ** ON A/C NOT FOR ALL

A. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002)

[Rev.10 from 2021] 2026.04.01 04:42:37 UTC