Cabin Layout Selection

TASK 23-73-00-860-002-A
Cabin Layout Selection

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 23-73-00-861-001-A	Energize the Cabin Intercommunication Data System (CIDS)
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 26-10-00-710-801-A	Smoke Detection Function Cabin Assignment Module (SDF CAM) Layout Loading
Cabin Layout Selection - Example ** ON A/C NOT FOR ALL
Cabin Layout Selection - Example ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 23-73-00-860-135-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the Cabin Intercommunication Data System (CIDS) is energized
(Ref. AMM TASK 23-73-00-861-001).

Subtask 23-73-00-860-135-B ** ON A/C NOT FOR ALL

Subtask 23-73-00-865-147-A

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
49VU	ENGINE/2/FADEC A/AND EIU 2	2KS2	A05
49VU	ENGINE/1/FADEC A/AND EIU 1	2KS1	A04
49VU	L/G/LGCIU/SYS1/NORM	1GA	C09
49VU	AIR COND/CAB/PRESS/CTL1	1HL	D09
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG2/FADEC B	4KS2	Q40
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG1/FADEC B/AND EIU 1	4KS1	R41
** ON A/C ALL
121VU	HYDRAULIC/LGCIU/SYS2	2GA	Q35
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG2/FADEC B/AND EIU2	4KS2	Q40
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG2/FADEC B/AND EIU2	4KS2	R41
121VU	ENGINE/ENG1/FADEC B/AND EIU 1	4KS1	R40
** ON A/C ALL
122VU	AIR COND/CAB PRESS/CTL/2	2HL	Y22

4. Procedure
Subtask 23-73-00-869-063-A ** ON A/C NOT FOR ALL

A. Selection of the Cabin Layout

Cabin Layout Selection - Example ** ON A/C NOT FOR ALL

NOTE: For OBRM P/N Z064H000033B or P/N Z064H000034C the passenger light signs and the passenger call lights will be off for 90 seconds after this task is completed.

(1) On Programming and Test Panel (PTP) 110RH, push the DSPL ON pushbutton.

The CIDS menu page comes on.

(2) Push the <PROGRAMMING related membrane switch.

The PROGRAMMING menu page comes on.

(3) Push the <CABIN PROGRAMMING related membrane switch.

The ENTER ACCESS CODE page comes on.

(4) Enter the access code '333' to the scratchpad field and push the <ENTER related membrane switch.

The CAM LAYOUT SELECT page comes on.

(5) Push the <CAM LAYOUT SELECT membrane switch.

The CAM LAYOUT SELECTION menu page comes on.

(6) Push the related LAYOUT membrane switch.

The message 'LAYOUT X LOADED' comes on.

NOTE: The last selected layout is marked with a flashing < or >.

(7) Push the <RET related membrane switch.

Subtask 23-73-00-869-063-D ** ON A/C NOT FOR ALL

A. Selection of the Cabin Layout

Cabin Layout Selection - Example ** ON A/C NOT FOR ALL

NOTE: For OBRM P/N Z064H000033B or P/N Z064H000034C the passenger light signs and the passenger call lights will be off for 90 seconds after this task is completed.

(1) On Flight Attendant Panel (FAP) 120RH, push the LAYOUT SELECT key.

The LAYOUT SELECTION page with the ENTER ACCESS CODE window comes on.

(2) On the numeric keyboard, enter the access code '318' and push the ENTER key.

The ENTER ACCESS CODE window goes out of view.

NOTE: On the LAYOUT SELECTION page, the active layout is marked with an ACTIVE text box.

(3) On the LAYOUT SELECTION page, push the 'Up' or 'Down' key to select a new layout.

A highlighted field shows you the layout as you select it.

(4) On the LAYOUT SELECTION page, push the LOAD key.

A message box 'LOADING IN PROGRESS / SYSTEM OPERATION BLOCKED' comes on.
After some seconds the message changes to 'LAYOUT: CAM X IS LOADED'.

(5) On the message box, push the OK key.

The message box goes out of view.
The LAYOUT SELECTION page comes on.
The highlighted field shows you the new cabin layout.

(6) Do the Smoke Detection Function Cabin Assignment Module (SDF CAM) Layout Loading, if applicable (Ref. AMM TASK 26-10-00-710-801).
(7) On the FAP, push the CABIN STATUS key.

The CABIN STATUS page comes on.

5. Close-up
Subtask 23-73-00-869-064-A ** ON A/C NOT FOR ALL

A. Push the DSPL ON pushbutton.

Subtask 23-73-00-869-064-B ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 05:37:34 UTC