Deactivation of the Forward Attendant Panel
TASK 23-73-00-040-002-A
Deactivation of the Forward Attendant Panel
MMEL 23-74-01A
FORWARD ATTENDANT PANEL (FAP) DISPLAY UNIT (FAA ONLY)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 23-73-00-860-187-A ** ON A/C NOT FOR ALL
Subtask 23-73-00-865-216-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:16:48 UTC
Deactivation of the Forward Attendant Panel
FIN: 120RH ** ON A/C NOT FOR ALL
1. Reason for the JobMMEL 23-74-01A
FORWARD ATTENDANT PANEL (FAP) DISPLAY UNIT (FAA ONLY)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 11-00-00-400-021-A | Installation of the Pressurized Area Placards |
| TASK 23-73-00-740-005-A | BITE-Test of the Cabin Intercommunication Data System (CIDS) through the CFDS |
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 31-60-00-860-001-A | EIS Start Procedure |
Subtask 23-73-00-860-187-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
(2) Do the EIS start procedure (upper ECAM DU and lower ECAM DU only)
(Ref. AMM TASK 31-60-00-860-001)
4. Procedure(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002)
(2) Do the EIS start procedure (upper ECAM DU and lower ECAM DU only)
(Ref. AMM TASK 31-60-00-860-001)
Subtask 23-73-00-865-216-A ** ON A/C NOT FOR ALL
A. Open, safety and tag this(these) circuit breaker(s):
Subtask 23-73-00-040-051-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM /CIDS/FWD ATTND/PNL | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM /CIDS/FLT ATTND/PNL | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM/FAP1/NORM | 170RH | Q14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/CIDS/FWD ATTND/PNL | 170RH | Q14 |
B. Procedure
(1) In the cockpit, on the MCDU:
(5) Make an entry in the logbook.
(1) In the cockpit, on the MCDU:
- Do the BITE-test of the CIDS through the CFDS.
(Ref. AMM TASK 23-73-00-740-005) - Make sure that only FAP-related failure messages show.
- Lift the handset from the cradle.
- Push and hold the PTT pushbutton switch and make an announcement.
- Make sure that you hear the announcement.
(5) Make an entry in the logbook.