Installation of the Exhaust Nozzle Alignment Pin [PW11]

TASK 78-11-01-400-803-A
Installation of the Exhaust Nozzle Alignment Pin

ZONE: 400

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	Torque wrench: range to between 50 and 45 lbf.in (0.57 and 0.51 m.daN )

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.PU3-0025)	sealant, tamper proof
(Material No.PU5-0003)	anti-seize compound

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
400	POWER PLANT, NACELLES AND PYLONS
FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL, 438AR, 452AR, 473AR
FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL, 448AR, 462AR, 483AR

D. Referenced Information

REFERENCE	DESIGNATION
TASK 71-00-00-860-833-A	Procedure to Prevent Engine Motoring
TASK 71-13-00-010-802-A	Opening of the Fan Cowl Doors
TASK 71-13-00-410-802-A	Closing of the Fan Cowl Doors
TASK 78-30-00-040-805-A	Deactivation of the Thrust Reverser System for Ground Maintenance
TASK 78-30-00-440-805-A	Reactivation of the Thrust Reverser System after Ground Maintenance
TASK 78-36-00-010-802-A	Opening of the Thrust Reverser Cowl-Doors
TASK 78-36-00-410-802-A	Closing of the Thrust Reverser Cowl-Doors
Exhaust Nozzle Alignment Pin

3. Job Set-up
Subtask 78-11-01-941-057-A ** ON A/C NOT FOR ALL

A. Safety Precautions
(1) Make sure that you did the procedure to prevent engine motoring
(Ref. AMM TASK 71-00-00-860-833).

Subtask 78-11-01-010-073-A ** ON A/C NOT FOR ALL

B. Get Access
(1) Make sure that the fan cowl doors are open (Ref. AMM TASK 71-13-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL, 438AR.
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL, 448AR.
(2) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position.

Subtask 78-11-01-040-058-A ** ON A/C NOT FOR ALL

C. Deactivation of the Thrust Reverser System for Maintenance

WARNING: YOU MUST DEACTIVATE THE THRUST REVERSER BEFORE YOU DO WORK ON OR AROUND IT. IF YOU DO NOT, THE THRUST REVERSER CAN OPERATE ACCIDENTALLY AND CAUSE AN INJURY AND/OR DAMAGE.

(1) Make sure that you did the deactivation of the thrust reverser system for maintenance (Ref. AMM TASK 78-30-00-040-805).

Subtask 78-11-01-010-074-A ** ON A/C NOT FOR ALL

D. Get Access
(1) Make sure that the right thrust reverser cowl-door is open (Ref. AMM TASK 78-36-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
452AR.
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
462AR.

Subtask 78-11-01-010-075-A ** ON A/C NOT FOR ALL

E. On the pylon, make sure that the access panel is opened:
(1) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
473AR.
(2) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
483AR.

4. Procedure
Subtask 78-11-01-420-052-A ** ON A/C NOT FOR ALL

A. Installation of the Exhaust Nozzle Alignment Pin

CAUTION: WIPE CLEAN ALL PARTS AND TOOLS AS NECESSARY TO REMOVE UNWANTED DEBRIS AND PREVENT DAMAGE TO THE ENGINE.

(1) Removal of the protection covers:

CAUTION: REMOVE THE PROTECTION COVERS FROM THE OPENINGS AS NECESSARY TO PREVENT ENGINE DAMAGE.

(a) Make sure that you remove all the necessary COVER - PROTECTION to prevent damage to the engine.
(2) Installation of the two alignment pins (3) on the exhaust turbine case:
(a) Apply the anti-seize compound (Material No.PU5-0003) to the shanks and threads of the two alignment pins (3).
(b) Install the two alignment pins (3), the two washers (2) and the two nuts (1) on the exhaust turbine case at approximately 1 o'clock and 6 o'clock positions.
(c) TORQUE the nuts (1) to between 50 and 45 lbf.in (0.57 and 0.51 m.daN )

.
(d) Paint the torque stripes on the two nuts (1) and the adjacent surfaces with the PU3-0025sealant, tamper proof.

5. Close-up
Subtask 78-11-01-410-059-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) On the pylon, close the access panel:
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
473AR.
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
483AR.
(3) Close the right thrust reverser cowl-door (Ref. AMM TASK 78-36-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
452AR.
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
462AR.

Subtask 78-11-01-440-054-A ** ON A/C NOT FOR ALL

B. Do the reactivation of the thrust reverser system after maintenance (Ref. AMM TASK 78-30-00-440-805).

Subtask 78-11-01-410-060-A ** ON A/C NOT FOR ALL

C. Close Access
(1) Close the fan cowl doors (Ref. AMM TASK 71-13-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL, 438AR.
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL, 448AR.
(2) Remove the access platform(s).
(3) Remove the WARNING NOTICE(S).

[Rev.10 from 2021] 2026.04.01 03:30:19 UTC