Configuration of the Accelerometer [IAE]

TASK 77-32-34-869-047-A
Configuration of the Accelerometer

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A	De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01	De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02	De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
TASK 31-32-00-860-012-A	Procedure to Get Access to the SYSTEM REPORT/TEST/ENG Page
EVMU Menu
Reconfiguration of the Accelerometer

3. Job Set-up
Subtask 77-32-34-861-059-A ** ON A/C NOT FOR ALL

A. Energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-861-002).

Subtask 77-32-34-865-061-A ** ON A/C NOT FOR ALL

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG1 AND 2/EVMU	1EV	R44

Subtask 77-32-34-869-077-A ** ON A/C NOT FOR ALL

C. Aircraft Maintenance Configuration
(1) On the 1(2) MCDU, get the SYSTEM REPORT/TEST ENG page (Ref. AMM TASK 31-32-00-860-012).
(2) Push the line key adjacent to the ENG VIBRATION indication: the first EVMU page comes into view.

EVMU Menu ** ON A/C NOT FOR ALL

(3) Push the NEXT PAGE function key: the second EVMU menu page comes into view.

4. Procedure
Subtask 77-32-34-869-078-A ** ON A/C NOT FOR ALL

A. Configuration of the Accelerometer

ACTION	RESULT
1.Push the line key adjacent to the ACC RECONFIGURATION program.	The configuration of the ENG 1 and ENG 2 comes into view. Reconfiguration of the Accelerometer ** ON A/C NOT FOR ALL detail A.
2.Push the line key adjacent to the indication of the engine on which you must change the configuration.	The new configuration comes into view. Reconfiguration of the Accelerometer ** ON A/C NOT FOR ALL detail B.
Push the line key as many times as necessary to have the applicable accelerometer.	Reconfiguration of the Accelerometer ON A/C NOT FOR ALL detail C. NOTE: If the selection is not acceptable due to a failure: the EVMU rejects the selection and transmits a failure message. Reconfiguration of the Accelerometer ON A/C NOT FOR ALL detail D.
3.Push the MCDU MENU mode key.	the MCDU menu comes into view.

5. Close-up
Subtask 77-32-34-862-059-A ** ON A/C NOT FOR ALL

A. De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).

[Rev.10 from 2021] 2026.04.01 03:18:32 UTC