DOC AIRBUS | AMM A320FDetailed Visual Inspection of the Engine Air Intake Ice Protection Swirl Nozzle [PW11]
TASK 71-61-00-220-802-A
Detailed Visual Inspection of the Engine Air Intake Ice Protection Swirl Nozzle
Refer to the MPD TASK: 302149-04
DETAILED INSPECTION OF ENGINE AIR INTAKE ICE PROTECTION SWIRL NOZZLE.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 71-61-00-941-078-A ** ON A/C NOT FOR ALL
Subtask 71-61-00-410-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 02:33:27 UTC
Detailed Visual Inspection of the Engine Air Intake Ice Protection Swirl Nozzle
WARNING:
BE CAREFUL WHEN YOU DO WORK ON THE ENGINE AFTER SHUTDOWN. THE ENGINE CAN STAY HOT FOR A LONG TIME. IF YOU DO NOT OBEY THIS INSTRUCTION, INJURY CAN OCCUR.
WARNING:
WEAR APPLICABLE PERSONAL PROTECTIVE EQUIPMENT (PPE) WHEN YOU DO THIS TASK. BEFORE YOU USE PPE, READ, UNDERSTAND AND OBEY ALL INSTRUCTIONS FOR ITS USE. THESE INSTRUCTIONS INCLUDE INSTRUCTIONS FROM THE MANUFACTURER, YOUR EMPLOYER AND GOVERNMENT REGULATIONS. YOU CAN GET INJURED IF YOU DO NOT USE PPE. GET INSTRUCTIONS FROM YOUR EMPLOYER ON WHICH PPE IS NECESSARY.
1. Reason for the JobRefer to the MPD TASK: 302149-04
DETAILED INSPECTION OF ENGINE AIR INTAKE ICE PROTECTION SWIRL NOZZLE.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | FLASHLIGHT |
| No specific | 1 | MIRROR - INSPECTION |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1) | |
| 437AL, 438AR | |
| FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2) | |
| 447AL, 448AR | |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 30-21-49-000-807-A | Removal of the Nacelle Anti-Ice (NAI) Duct |
| TASK 30-21-49-400-807-A | Installation of Nacelle Anti-Ice (NAI) Duct |
| TASK 71-00-00-860-833-A | Procedure to Prevent Engine Motoring |
| TASK 71-13-00-010-802-A | Opening of the Fan Cowl Doors |
| TASK 71-13-00-410-802-A | Closing of the Fan Cowl Doors |
| TASK 71-61-14-000-801-A | Removal of the Anti-ice Access Panel |
| TASK 71-61-14-400-801-A | Installation of the Anti-Ice Access Panel |
| TASK 71-61-15-000-801-A | Removal of the Inlet Cowl Engine Anti-Ice (EAI) Duct |
| TASK 71-61-15-400-801-A | Installation of the Inlet Cowl Engine Anti-Ice (EAI) Duct |
Engine Anti-Ice DuctSubtask 71-61-00-941-078-A ** ON A/C NOT FOR ALL
A. Safety Precautions
(1) Do the procedure to prevent engine motoring
(Ref. AMM TASK 71-00-00-860-833).
Subtask 71-61-00-010-054-A ** ON A/C NOT FOR ALL (1) Do the procedure to prevent engine motoring
(Ref. AMM TASK 71-00-00-860-833).
B. Get Access
(1) Open the fan cowl doors (Ref. AMM TASK 71-13-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
(2) Remove the insulation covers from the forward Nacelle Anti-Icing (NAI) duct and the engine anti-ice housing (Ref. AMM TASK 30-21-49-000-807).
(3) Disconnect the forward NAI duct from the inlet cover anti-ice duct (Ref. AMM TASK 30-21-49-000-807).
4. Procedure(1) Open the fan cowl doors (Ref. AMM TASK 71-13-00-010-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
(2) Remove the insulation covers from the forward Nacelle Anti-Icing (NAI) duct and the engine anti-ice housing (Ref. AMM TASK 30-21-49-000-807).
(3) Disconnect the forward NAI duct from the inlet cover anti-ice duct (Ref. AMM TASK 30-21-49-000-807).
CAUTION:
WIPE CLEAN ALL PARTS AND TOOLS AS NECESSARY TO REMOVE UNWANTED DEBRIS AND PREVENT DAMAGE TO THE ENGINE.
Subtask 71-61-00-220-051-A ** ON A/C NOT FOR ALL A. Detailed Visual Inspection of the Engine Air Intake Ice Protection Swirl Nozzle
(1) Do not discard a part until you are sure that there are no repairs available. If you reject a part and no repair is available, contact United Technologies Aerospace Systems (UTAS) for disposition.
(2) Remove the inner and outer engine anti-ice housings and two seals from the engine anti-ice duct (Ref. AMM TASK 71-61-15-000-801).
(3) Remove the anti-ice access panel (Ref. AMM TASK 71-61-14-000-801).
(4) Do a detailed visual inspection of the engine anti-ice duct.
(a) Use the FLASHLIGHT and the MIRROR - INSPECTION.
(b) Examine the inner and outer engine anti-ice housings. Look for nicks, scratches, loose or missing fasteners and other damage.
1 If you find damage, replace the part or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(c) Examine the two seals. Look for cracks, gouges and holes.
1 If you find demage replace the parts or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(d) Examine the engine anti-ice duct. Look for dents, holes, cracks, loose or missing fasteners and other damage.
1 If you find damage, replace the parts or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(5) Install the anti-ice access panel (Ref. AMM TASK 71-61-14-400-801).
(6) Install the inner and outer housings and the two seals on the engine anti-ice duct (Ref. AMM TASK 71-61-15-400-801).
5. Close-up(1) Do not discard a part until you are sure that there are no repairs available. If you reject a part and no repair is available, contact United Technologies Aerospace Systems (UTAS) for disposition.
(2) Remove the inner and outer engine anti-ice housings and two seals from the engine anti-ice duct (Ref. AMM TASK 71-61-15-000-801).
(3) Remove the anti-ice access panel (Ref. AMM TASK 71-61-14-000-801).
(4) Do a detailed visual inspection of the engine anti-ice duct.
(a) Use the FLASHLIGHT and the MIRROR - INSPECTION.
(b) Examine the inner and outer engine anti-ice housings. Look for nicks, scratches, loose or missing fasteners and other damage.
1 If you find damage, replace the part or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(c) Examine the two seals. Look for cracks, gouges and holes.
1 If you find demage replace the parts or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(d) Examine the engine anti-ice duct. Look for dents, holes, cracks, loose or missing fasteners and other damage.
1 If you find damage, replace the parts or contact UTAS for disposition (Ref. AMM TASK 71-61-15-000-801) and (Ref. AMM TASK 71-61-15-400-801).
(5) Install the anti-ice access panel (Ref. AMM TASK 71-61-14-400-801).
(6) Install the inner and outer housings and the two seals on the engine anti-ice duct (Ref. AMM TASK 71-61-15-400-801).
Subtask 71-61-00-410-053-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Attach the forward NAI duct to the inlet cover anti-ice duct (Ref. AMM TASK 30-21-49-400-807).
(3) Install the insulation covers on the forward NAI duct and the engine anti-ice housing (Ref. AMM TASK 30-21-49-400-807).
(4) Close the fan cowl doors (Ref. AMM TASK 71-13-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
(5) Remove the WARNING NOTICE(S).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Attach the forward NAI duct to the inlet cover anti-ice duct (Ref. AMM TASK 30-21-49-400-807).
(3) Install the insulation covers on the forward NAI duct and the engine anti-ice housing (Ref. AMM TASK 30-21-49-400-807).
(4) Close the fan cowl doors (Ref. AMM TASK 71-13-00-410-802):
(a) FOR [4020KM1] (POWER PLANT-DEMOUNTABLE, ENG 1)
437AL 438AR
(b) FOR [4020KM2] (POWER PLANT-DEMOUNTABLE, ENG 2)
447AL 448AR
(5) Remove the WARNING NOTICE(S).