Load Adjustment of the Control Handle of the FWD Passenger/Crew Door

TASK 52-11-00-820-002-A
Load Adjustment of the Control Handle of the FWD Passenger/Crew Door

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
No specific	AR	DYNAMOMETER 20 DAN (45 LBF) - PULL
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER
98D52103501000	1	BALLAST WEIGHT - PASSENGER CREW DOOR

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.14QFB1)	Wire-Locking Dia: 0.8 mm CRES Nickel Alloy -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
831AZ, 831BZ, 831CZ, 831DZ, 831EZ, 831FZ, 831GZ, 841AZ, 841BZ, 841CZ, 841DZ, 841EZ, 841FZ, 841GZ

D. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-46-000-001-A	Removal of the Door Linings from the Forward Passenger/Crew Doors
TASK 25-23-46-400-001-A	Installation of the Door Linings on the Forward Passenger/Crew Doors
TASK 25-62-44-000-002-A	Removal of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-000-012-A	Removal of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-000-802-A	Removal of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-000-804-A	Removal of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-006-A	Installation of the Left Escape-Slide Pack-Assembly
TASK 25-62-44-400-007-A	Installation of the Left-Hand Escape-Slide-Raft Pack-Assembly
TASK 25-62-44-400-802-A	Installation of the Right Escape-Slide Pack-Assembly
TASK 25-62-44-400-803-A	Installation of the Right-Hand Escape-Slide-Raft Pack-Assembly
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-080-001-A	Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide
TASK 52-10-00-080-001-B	Removal of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 52-10-00-480-001-A	Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide
TASK 52-10-00-480-001-B	Installation of the Passenger/Crew Door Ballast Weight (98D52103501000) for Escape Slide/Raft
TASK 52-10-00-860-001-A	Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A	Special Precautions after Work on the Passenger/Crew Door
Load Adjustment of the Inner Control Handle of the Forward Passenger/Crew Door ** ON A/C NOT FOR ALL
Load Adjustment of the Inner Control Handle of the Forward passenger/Crew Door ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-11-00-941-052-A

A. Get Access

WARNING: DO NOT OPEN THE PASSENGER/CREW DOOR IF THE WIND SPEED IS MORE THAN 65 KNOTS.

WARNING: BEFORE YOU START WORK ON THE DOOR, MAKE SURE THAT:

THE EMERGENCY CONTROL HANDLE IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.
THE PERCUSSION LEVER OF THE DOOR-DAMPER AND EMERGENCY-OPERATION CYLINDER IS IN THE DISARMED POSITION WITH THE SAFETY PIN INSTALLED.

IF YOU DO NOT OBEY THESE INSTRUCTIONS, THE DOOR CAN OPEN WITH FORCE OR THE ESCAPE SLIDE CAN DEPLOY SUDDENLY. THIS CAN CAUSE INJURY AND/OR DAMAGE.

WARNING: STOP THE OPENING PROCEDURE IF THE RED WARNING LIGHT FLASHES. IF THE RED WARNING LIGHT FLASHES, REMAINING PRESSURE CAN CAUSE THE DOOR TO OPEN SUDDENLY AND CAN:

KILL OR CAUSE SERIOUS INJURY TO PERSONS
CAUSE DAMAGE TO THE AIRCRAFT.

(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position in front of the passenger/crew door 831 or 841.
(2) Open the applicable passenger/crew door (Ref. AMM TASK 52-10-00-010-001)
(3) Obey the special precautions before you start work on the door (Ref. AMM TASK 52-10-00-860-001).

Subtask 52-11-00-865-056-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	EIS/SLIDES/ARM AND WARN/FLT	15WN	P11
121VU	EIS/SLIDES/ARM AND WARN/GND	13WN	P10
121VU	EIS/SDAC1 AND 2/DOOR/DET/PAX	48WV	P05

Subtask 52-11-00-010-058-A ** ON A/C NOT FOR ALL

C. Removal of Component
(1) Remove the escape slide:
(a) For the left door:
If installed, remove the left-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-000-002).
(b) For the right door:
If installed, remove the right-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-000-802)
(2) Remove the door lining panels (Ref. AMM TASK 25-23-46-000-001).
(a) For the left door: 831FZ 831CZ 831DZ 831AZ 831BZ 831EZ 831GZ.
(b) For the right door: 841FZ 841CZ 841DZ 841AZ 841BZ 841EZ 841GZ.
(3) Remove the door insulation.
(4) Install the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-480-001).

Subtask 52-11-00-010-058-B ** ON A/C NOT FOR ALL

C. Removal of Component
(1) Remove the escape slide:
(a) For the left door:
If installed, remove the left-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-000-012).
(b) For the right door:
If installed, remove the right-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-000-804).
(2) Remove the door lining panels (Ref. AMM TASK 25-23-46-000-001).
(a) For the left door: 831FZ 831CZ 831DZ 831AZ 831BZ 831EZ 831GZ.
(b) For the right door: 841FZ 841CZ 841DZ 841AZ 841BZ 841EZ 841GZ.
(3) Remove the door insulation.
(4) Install the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-480-001).

4. Procedure
Subtask 52-11-00-820-051-A

A. Load Adjustment of the Control Handle

Load Adjustment of the Inner Control Handle of the Forward Passenger/Crew Door ** ON A/C NOT FOR ALL

Load Adjustment of the Inner Control Handle of the Forward passenger/Crew Door ** ON A/C NOT FOR ALL

(1) Take a DYNAMOMETER 20 DAN (45 LBF) - PULL.
(2) Make sure that the load necessary to open the door with the inner control handle (2) is less than or equal to 18 daN (40.47 lbf).
(3) If the load is not in the tolerances, adjust as follows:
(a) Remove and discard the lockwire from the tension bolt (1),
(b) Adjust the tension bolt (1) to get the correct load,
(c) Safety the tension bolt (1) with 14QFB1Wire-Locking Dia: 0.8 mm CRES Nickel Alloy -,
(4) Make sure that the inner control handle (2) comes to its initial position with the door on the up position and the low position.

5. Close-up
Subtask 52-11-00-410-052-A ** ON A/C NOT FOR ALL

A. Installation of the Component
(1) Remove the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-080-001).
(2) Install the door insulation.
(3) Install the door lining panels (Ref. AMM TASK 25-23-46-400-001).
(a) For the left door: 831GZ 831FZ 831EZ 831DZ 831CZ 831BZ 831AZ.
(b) For the right door: 841GZ 841FZ 841EZ 841DZ 841CZ 841BZ 841AZ.
(4) Install the escape slide:
(a) For the left door:
Install the left-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-400-006).
(b) For the right door:
Install the right-hand escape slide pack assembly (Ref. AMM TASK 25-62-44-400-802).

Subtask 52-11-00-410-052-B ** ON A/C NOT FOR ALL

A. Installation of the Component
(1) Remove the 98D52103501000 BALLAST WEIGHT - PASSENGER CREW DOOR (Ref. AMM TASK 52-10-00-080-001).
(2) Install the door insulation.
(3) Install the door lining (Ref. AMM TASK 25-23-46-400-001).
(4) Install the escape slide:
(a) For the left door:
Install the left-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-400-007).
(b) For the right door:
Install the right-hand escape slide raft pack assembly (Ref. AMM TASK 25-62-44-400-803).

Subtask 52-11-00-865-057-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	EIS/SLIDES/ARM AND WARN/FLT	15WN	P11
121VU	EIS/SLIDES/ARM AND WARN/GND	13WN	P10
121VU	EIS/SDAC1 AND 2/DOOR/DET/PAX	48WV	P05

Subtask 52-11-00-942-054-A

C. Close Access
(1) Obey the special precautions after the work on the door (Ref. AMM TASK 52-10-00-860-002).
(2) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(3) Close the applicable passenger/crew door 831 or 841 (Ref. AMM TASK 52-10-00-410-001) .
(4) Remove the access platform(s).
(5) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 01:36:03 UTC