Removal of the Oil Pump-Filter Differential-Pressure-Indicator (APS 3200)
TASK 49-91-22-000-002-A
Removal of the Oil Pump-Filter Differential-Pressure-Indicator (APS 3200)
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 49-91-22-860-050-A ** ON A/C NOT FOR ALL
Subtask 49-91-22-020-051-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 01:33:07 UTC
Removal of the Oil Pump-Filter Differential-Pressure-Indicator (APS 3200)
WARNING:
DO NOT TOUCH THE APU UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS WHEN YOU DO THE MAINTENANCE TASK(S).
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | AR | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 315 | TAIL CONE APU AND ACCESSORY COMPARTMENT |
| 316 | TAIL CONE APU AND ACCESSORY COMPARTMENT |
| 315AL, 316AR |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 29-00-00-864-001-A | Put the Related Hydraulic System in the Depressurized Configuration before Maintenance Action |
| TASK 52-41-00-010-001-A | Open the APU Doors for Access |
Subtask 49-91-22-860-050-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On panel 25VU, make sure that the APU MASTER SW pushbutton switch is off.
(3) Put the WARNING NOTICE(S) in the cockpit to tell persons not to start the APU.
(4) Depressurize the aircraft hydraulic systems
(Ref. AMM TASK 29-00-00-864-001).
Subtask 49-91-22-865-055-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) On panel 25VU, make sure that the APU MASTER SW pushbutton switch is off.
(3) Put the WARNING NOTICE(S) in the cockpit to tell persons not to start the APU.
(4) Depressurize the aircraft hydraulic systems
(Ref. AMM TASK 29-00-00-864-001).
B. Open, safety and tag this(these) circuit breaker(s):
Subtask 49-91-22-010-052-A ** ON A/C NOT FOR ALL | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | APU/APU/CTL | 2KD | L42 |
| 121VU | APU/ECB/SPLY | 1KD | L41 |
C. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below APU access doors 315AL and 316AR.
(2) Open APU access doors 315AL and 316AR (Ref. AMM TASK 52-41-00-010-001).
(3) Set the LIGHT control switch 11LJ to the on position.
4. Procedure(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below APU access doors 315AL and 316AR.
(2) Open APU access doors 315AL and 316AR (Ref. AMM TASK 52-41-00-010-001).
(3) Set the LIGHT control switch 11LJ to the on position.
Subtask 49-91-22-020-051-A ** ON A/C NOT FOR ALL
A. Removal of the Differential Pressure Indicator
(1) Remove the screws (4) from the differential pressure indicator (3).
(2) Remove the differential pressure indicator (3).
(3) Remove the packing (1) and (2) from the differential pressure indicator (3).
(4) Discard the packing (1) and (2).
(1) Remove the screws (4) from the differential pressure indicator (3).
(2) Remove the differential pressure indicator (3).
(3) Remove the packing (1) and (2) from the differential pressure indicator (3).
(4) Discard the packing (1) and (2).
Oil Pump-Filter Differential-Pressure-Indicator