Inspection of the APU (APS 3200) for De-Icing Contamination

TASK 49-00-00-200-803-A
Inspection of the APU (APS 3200) for De-Icing Contamination

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 49-13-00-200-002-A	General Visual Inspection of all APU Compartment Fire Walls and Seals (Compartment Doors, Fwd and Aft Walls, Side Fire Walls, Upper Fire Wall)
TASK 49-16-00-100-006-A	Cleaning of the APU Air Intake (APS 3200)
TASK 49-16-00-210-002-A	Detailed Inspection of APU Air Intake, Diffuser Elbow, Seals and Felt Metal (APS 3200)
TASK 49-17-00-200-001-A	Inspect the APU Drain System (APS 3200)

3. Job Set-up
Subtask 49-00-00-010-084-A ** ON A/C NOT FOR ALL

A. Not applicable

4. Procedure
Subtask 49-00-00-210-082-A ** ON A/C NOT FOR ALL

A. General Visual Inspection
(1) Examine the external surfaces of the APU doors for signs of de-icing fluid contamination. If signs are found:
(a) Clean the surfaces.
(b) Do an inspection of the APU compartment doors seals (Ref. AMM TASK 49-13-00-200-002).
(c) Examine the APU compartment drain holes for signs of de-icing fluid contamination. If signs are found:
1 Do a general visual inspection of the APU compartment draining system (Ref. AMM TASK 49-17-00-200-001).
(2) Examine the external and internal surfaces of the APU intake duct for signs of de-icing fluid contamination. If signs are found:
(a) Clean the air intake and diffuser elbow (Ref. AMM TASK 49-16-00-100-006).
(b) Do an inspection of the APU intake diffuser and elbow seals (Ref. AMM TASK 49-16-00-210-002).

[Rev.10 from 2021] 2026.04.01 12:41:48 UTC