Installation of the EFB Display Unit (DU) Mounting Bracket
TASK 46-26-22-400-002-A
Installation of the EFB Display Unit (DU) Mounting Bracket
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 46-26-22-861-053-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 46-26-22-420-051-A ** ON A/C NOT FOR ALL
Subtask 46-26-22-862-052-A ** ON A/C NOT FOR ALL Subtask 46-26-22-860-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 12:51:54 UTC
Installation of the EFB Display Unit (DU) Mounting Bracket
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | Torque wrench: range to between .48 and 0.37 m.daN (42.48 and 32.74 lbf.in ) ![]() |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 46-26-22-861-053-A ** ON A/C NOT FOR ALL 4. Procedure
Subtask 46-26-22-420-051-A ** ON A/C NOT FOR ALL
A. Installation of the DU mounting bracket
(1) Put the CAPT(F/O) DU mounting bracket in correct position on its fittings (1).
(2) Install the four rings (5), washers (6), nuts (7), washers (4) and screws (3).
(3) Torque the four screws (4) to between .48 and 0.37 m.daN (42.48 and 32.74 lbf.in )
.
5. Close-up(1) Put the CAPT(F/O) DU mounting bracket in correct position on its fittings (1).
(2) Install the four rings (5), washers (6), nuts (7), washers (4) and screws (3).
(3) Torque the four screws (4) to between .48 and 0.37 m.daN (42.48 and 32.74 lbf.in )
. Subtask 46-26-22-862-052-A ** ON A/C NOT FOR ALL Subtask 46-26-22-860-053-A ** ON A/C NOT FOR ALL
B. Aircraft Maintenance Configuration
(1) Make sure that the work area is clean and clear of tools and other items.
(1) Make sure that the work area is clean and clear of tools and other items.
Illustration of the DU Mounting Bracket