Functional Test of the Brake Fans
TASK 32-48-00-720-001-A
Functional Test of the Brake Fans
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 32-48-00-860-055-A ** ON A/C NOT FOR ALL
Subtask 32-48-00-720-050-A ** ON A/C NOT FOR ALL
Subtask 32-48-00-942-053-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 00:50:33 UTC
Functional Test of the Brake Fans
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 32-48-00-860-055-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) On the panel 402VU, make sure that the BRK FAN CONTROL pushbutton switch is released.
(2) Energize the aircraft electrical circuits. (Ref. AMM TASK 24-41-00-861-002)
Subtask 32-48-00-941-053-A ** ON A/C NOT FOR ALL (1) On the panel 402VU, make sure that the BRK FAN CONTROL pushbutton switch is released.
(2) Energize the aircraft electrical circuits. (Ref. AMM TASK 24-41-00-861-002)
B. Safety Precautions
(1) Put the WARNING NOTICE(S) in position to tell persons that the cooling fans will operate.
(2) Make sure that the area adjacent to the brake fans is clear of equipment.
Subtask 32-48-00-865-056-A ** ON A/C NOT FOR ALL (1) Put the WARNING NOTICE(S) in position to tell persons that the cooling fans will operate.
(2) Make sure that the area adjacent to the brake fans is clear of equipment.
C. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/XFMR/115V.5V/ESS BUS | 29LP | H03 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/XFMR/115V.5V/ESS BUS | 29LP | H01 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | HYDRAULIC/BRK FAN/WHEELS/3 AND 4 | 2GS | L35 |
| 121VU | HYDRAULIC/BRK FAN/WHEELS/1 AND 2 | 1GS | L32 |
| 121VU | HYDRAULIC/BRK/FAN/CTL | 3GS | M32 |
| 121VU | HYDRAULIC/LGCIU/SYS2 | 2GA | Q35 |
| 122VU | LIGHTING/TST/BOARD/SPLY | 30LP | X06 |
| 122VU | LIGHTING/ANN LT SPLY/XFMR/BUS 2 | 27LP | X05 |
| 122VU | LIGHTING/ANN LT SPLY/XFMR/BUS 1 | 26LP | X04 |
| 122VU | LIGHTING/ANN LT SPLY/XFMR/STAT INV | 28LP | X03 |
Subtask 32-48-00-720-050-A ** ON A/C NOT FOR ALL
A. Test of the brake fans
Subtask 32-48-00-860-056-A ** ON A/C NOT FOR ALL | ACTION | RESULT |
|---|---|
| 1.On the panel 402VU, push the BRK FAN CONTROL pushbutton switch. |
|
| 2.On the panel 402VU, release the BRK FAN CONTROL pushbutton switch. |
|
B. Aircraft Maintenance Configuration
(1) De-energize the aircraft electrical circuits. (Ref. AMM TASK 24-41-00-862-002)
5. Close-up(1) De-energize the aircraft electrical circuits. (Ref. AMM TASK 24-41-00-862-002)
Subtask 32-48-00-942-053-A ** ON A/C NOT FOR ALL
A. Removal of Equipment
(1) Remove the warning notice(s)
(2) Make sure that the work area is clean and clear of tools and other items.
(1) Remove the warning notice(s)
(2) Make sure that the work area is clean and clear of tools and other items.