Reactivation of the Cockpit Voice and Data Recorder (CVDR)
TASK 31-39-00-440-801-A
Reactivation of the Cockpit Voice and Data Recorder (CVDR)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 31-39-00-860-060-A ** ON A/C NOT FOR ALL
Subtask 31-39-00-440-050-A ** ON A/C NOT FOR ALL
Subtask 31-39-00-860-061-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 08:31:20 UTC
Reactivation of the Cockpit Voice and Data Recorder (CVDR)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 31-39-00-860-060-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-39-00-865-060-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | RCDR1 CVR&FDR | 40TU | E14 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | RCDR2 CVR&FDR | 42TU | K16 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | RCDR2 CVR&FDR | 42TU | K39 |
Subtask 31-39-00-440-050-A ** ON A/C NOT FOR ALL
A. Rectivation of the CVDR
(1) Close circuit breakers 40TU and 42TU of the CVDR1 and CVDR2.
5. Close-up(1) Close circuit breakers 40TU and 42TU of the CVDR1 and CVDR2.
NOTE: On the ECAM display, make sure that the messages "RECORDER CVR FAULT" and "RECORDER DFDR FAULT" go out of view.
Subtask 31-39-00-860-061-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
(2) Make sure that the work area is clean and clear of tools and other items.
(1) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
(2) Make sure that the work area is clean and clear of tools and other items.