Removal of the Smart PCMCIA Card (SPC) of the FDIMU
TASK 31-36-00-000-805-A
Removal of the Smart PCMCIA Card (SPC) of the FDIMU
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 31-36-00-861-088-A ** ON A/C NOT FOR ALL
Subtask 31-36-00-000-058-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 08:35:53 UTC
Removal of the Smart PCMCIA Card (SPC) of the FDIMU
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | SMART PCMCIA CARD |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 128 | REAR AVIONIC COMPARTMENT |
| 824 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 52-41-00-010-002-A | Open the Avionics Compartment Doors for Access |
| TASK 31-36-00-00-02 | AIDS INTERCONNECTION (DMU, DAR) - DESCRIPTION AND OPERATION |
Subtask 31-36-00-861-088-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 31-36-00-010-097-A ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
B. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) in position at access door 824 in zone 128.
(2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).
(3) For the location of the components, refer to the paragraph component location (Ref. AMM D/O 31-36-00-00).
Subtask 31-36-00-865-173-A ** ON A/C NOT FOR ALL (1) Put the ACCESS PLATFORM 2M (6 FT) in position at access door 824 in zone 128.
(2) Open access door 824 (Ref. AMM TASK 52-41-00-010-002).
(3) For the location of the components, refer to the paragraph component location (Ref. AMM D/O 31-36-00-00).
C. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 121VU | AIDS & RCDR/FDIMU | 5TV | K15 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | AIDS & RCDR/FDIMU | 5TV | K38 |
Subtask 31-36-00-000-058-A ** ON A/C NOT FOR ALL
A. Removal of the Smart PCMCIA Card (SPC)
(1) Open the cover to get access to the SPC.
(2) Remove the SMART PCMCIA CARD.
(3) Close the cover.
(1) Open the cover to get access to the SPC.
(2) Remove the SMART PCMCIA CARD.
(3) Close the cover.
Smart PCMCIA Card (SPC) of the FDIMU