Installation of the Special Equipment of the Space Flex Lavatory

TASK 25-45-40-400-804-A
Installation of the Special Equipment of the Space Flex Lavatory

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power
TASK 25-45-18-000-802-A	Removal of the Access Doors of the Space Flex Lavatory
TASK 25-45-18-400-802-A	Installation of the Access Doors of the Space Flex Lavatory
Amenities Dispenser of the Space Flex Lavatory
Air-Sick Bag Dispenser of the Space Flex Lavatory

3. Job Set-up
Subtask 25-45-40-860-053-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
(2) Make sure that the access door is removed (Ref. AMM TASK 25-45-18-000-802).

4. Procedure
Subtask 25-45-40-210-053-A ** ON A/C NOT FOR ALL

A. Preparation for Installation
(1) Clean the component interfaces and the adjacent area.
(2) Do a visual inspection of the component interfaces and the adjacent area.
(3) Make sure that the parts retained from the removed component are clean and in the correct condition.

Subtask 25-45-40-420-053-A ** ON A/C NOT FOR ALL

B. Installation of the Amenities Dispenser of the Space Flex Lavatory

Amenities Dispenser of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) Make sure that the access door (2) is open.
(2) Put the flap (3) in position, then install the washers (5) and the screws (4).
(3) Tighten the screws (4).
(4) Make sure that the flap (3) operates correctly.
(5) Close the access door (2).
(6) Make sure that the access door (1) is open.
(7) Put the paper towel dispenser (8) in position, theninstall the washers (6) and the screws (7).
(8) Tighten the screws (7).
(9) Close the access door (1).

Subtask 25-45-40-420-054-A ** ON A/C NOT FOR ALL

C. Installation of the Air-Sick Bag Dispenser of the Space Flex Lavatory

Air-Sick Bag Dispenser of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) When you connect/install the components, refer to the match marks made during the removal procedure.
(2) Put the air-sick bag dispenser (7) in position and install the pin (6).
(3) Put the shroud (1) in position, then install the washers (2) and the screws (3).
(4) Tighten the screws (3).
(5) Put the cover (5) in position and install the screws (4).
(6) Tighten the screws (4).

5. Close-up
Subtask 25-45-40-410-051-A ** ON A/C NOT FOR ALL

A. Close Access to the Space-Flex Lavatory-Amenities Dispenser
(1) Install the access door (Ref. AMM TASK 25-45-18-400-802).

Subtask 25-45-40-862-053-A ** ON A/C NOT FOR ALL

B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.03.31 23:36:50 UTC