Removal of the Access Doors of the Space Flex Lavatory

TASK 25-45-18-000-802-A
Removal of the Access Doors of the Space Flex Lavatory

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Access Doors of the Space Flex Lavatory

3. Job Set-up
Subtask 25-45-18-861-052-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-18-020-052-A ** ON A/C NOT FOR ALL

A. Removal of the Access Doors of the Space Flex Lavatory

Access Doors of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Remove the access door (1) as follows:
(a) Push the button (2) and open the access door (1).
(b) Remove the screw (7) and the washer (6).
(c) If the washers (5) and the spacer (3) are installed, remove them.
(d) Release the door stop (4).
(e) Remove the pins (8) and the access door (1).
(3) Remove the access door (10) as follows:
(a) Push the button (11) and open the access door (10).
(b) Remove the pins (9) and the access door (10).
(4) Remove the access doors (12) as follows:
(a) Release the latches (18) and open the access doors (12).
(b) If the supports (16) are installed, remove them:
1 Remove the screws (17) and the supports (16).
(c) If the supports (27) are installed, remove them as follows:
1 Remove the screws (28).
2 If the washers (29) are installed, remove them.
3 If the spacers (30) are installed, remove them.
4 Remove the supports (27).
(d) Remove the screws (14) and the hinges (13) from the covers (15) and the access doors (12).
(e) Remove the access doors (12).
(5) Remove the access doors (20) as follows:
(a) Release the latches (21) and open the access doors (20).
(b) If the supports (26) are installed, remove them:
1 Remove the screws (25) and the supports (26).
(c) If the supports (32) and (35) are installed, remove them:
1 Remove the screws (31), (33), (34), (36) and (37) and the supports (32) and (35).
(d) Remove the pins (19).
(e) Remove the access doors (20).
(6) Remove the access door (23) as follows:
(a) Release the receptacle (24) and open the access door (23).
(b) Remove the pin (22) and the access door (23).

[Rev.10 from 2021] 2026.04.01 06:20:14 UTC