Installation of the USB Converter of the Personal Tablet

TASK 25-18-12-400-801-A
Installation of the USB Converter of the Personal Tablet

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.04JMD9)	Top Coat Polyurethane-- Decorative Furnishing

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 25-13-41-000-803-A	Removal of the Personal Tablet Support
TASK 25-13-41-400-803-A	Installation of the Personal Tablet Support
TASK 30-42-00-710-001-A	Operational Test of the Windshield Anti-Icing and Defogging
TASK 56-12-11-000-002-A	Removal of the Sliding Window Panel
TASK 56-12-11-000-002-A-01	Removal of the Sliding Window Panel
TASK 56-12-11-400-002-A	Installation of the Sliding Window Panel
TASK 56-12-11-400-002-A-01	Installation of the Sliding Window Panel
USB Converter of the Personal Tablet

3. Job Set-up
Subtask 25-18-12-865-051-A ** ON A/C NOT FOR ALL

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WHC/1	5DG1	X13
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
123VU	ANTI ICE/L/WHSLD	1DG1	AF10
123VU	ANTI ICE/R/WHSLD	1DG2	AF03

Subtask 25-18-12-010-051-A

B. Get Access
(1) Make sure that the personal tablet support is removed (Ref. AMM TASK 25-13-41-000-803).
(2) Make sure that the sliding window lining is removed (Ref. AMM TASK 56-12-11-000-002).

4. Procedure
Subtask 25-18-12-420-050-A

A. Installation of the USB Converter of the Personal Tablet

USB Converter of the Personal Tablet

(1) Put and hold the USB converter (4) in position with the inner support plate (5) on the sliding window lining.
(2) Put the outer support plate (3) in position on the sliding window lining.
(3) Install the screws (2) and (1) and tighten them.
(4) Apply Top Coat Polyurethane-- Decorative Furnishing (Material No.04JMD9) on the head of the screws (1) and (2).

Subtask 25-18-12-865-052-A ** ON A/C NOT FOR ALL

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
122VU	ANTI ICE/WINDOWS/R	4DG2	W14
122VU	ANTI ICE/WHC/2	5DG2	W13
122VU	ANTI ICE/WINDOWS/L	4DG1	X14
122VU	ANTI ICE/WHC/1	5DG1	X13
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05
123VU	ANTI ICE/L/WHSLD	1DG1	AF10
123VU	ANTI ICE/R/WHSLD	1DG2	AF03

Subtask 25-18-12-710-050-A

C. Operational Test
(1) Do the operational test of the windshield anti-icing and defogging (Ref. AMM TASK 30-42-00-710-001).
(2) Do a voltage check between pin 1 and pin 4 of the USB connector to make sure that the voltage is 5 VDC.

USB Converter of the Personal Tablet

5. Close-up
Subtask 25-18-12-410-050-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sliding window lining (Ref. AMM TASK 56-12-11-400-002).
(3) Install the personal tablet support (Ref. AMM TASK 25-13-41-400-803).

[Rev.10 from 2021] 2026.03.31 23:29:37 UTC