W DOC AIRBUS | AMM A320F

Operational Test of the Configuration and of the Conformity

TASK 23-33-00-710-811-A
Operational Test of the Configuration and of the Conformity

ZONE: 220
1. Reason for the Job
Self explanatory.
2. Job Set-up Information
 A. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
220
FWD CAB UTILITY AREAS
 B. Referenced Information
REFERENCE
DESIGNATION
TASK 23-33-00-600-802-A
Software / Media Download and Configuration of the IFE system
TASK 24-41-00-861-002-A
Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01
Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02
Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 24-41-00-862-002-A
De-energize the Aircraft Electrical Circuits Supplied from the External Power
TASK 24-41-00-862-002-A-01
De-energize the Aircraft Electrical Circuits Supplied from the APU
TASK 24-41-00-862-002-A-02
De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2)
3. Job Set-up
Subtask 23-33-00-861-084-A ** ON A/C NOT FOR ALL
A. Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
Subtask 23-33-00-010-086-A ** ON A/C NOT FOR ALL
B. Get Access
   (1) Open the applicable access door(s) to get access to Video Control Center (VCC) 10MH.
Subtask 23-33-00-865-239-A ** ON A/C NOT FOR ALL
C. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUIFE-IFEC-AC22MKC04
** ON A/C NOT FOR ALL
2000VUINSEAT POWER-MCU 259HPB08
2000VUINSEAT POWER-MCU 158HPB05
2000VUIFE-VCC-AC21MHC02
2000VUIFE-VCC-DC20MHC01
2000VUIFE/SEAT-POWER-PAX SYS20MKD08
2000VUWAP27MHD07
** ON A/C NOT FOR ALL
2000VUIFE-IFEC-AC22MKC06
Subtask 23-33-00-860-162-A ** ON A/C NOT FOR ALL
D. Aircraft Maintenance Configuration
   (1) Push the PAX SYS switch on VCC 10MH.
   (2) Make sure that the internal light of the PAX SYS switch comes on.
   (3) Wait until the integrated In-Flight Entertainment (IFE) system boot sequence is completed.
NOTE: Approximately five minutes are necessary to complete the boot sequence.
   (4) Make sure that the software is loaded (Ref. AMM TASK 23-33-00-600-802).
4. Procedure
Subtask 23-33-00-710-116-A ** ON A/C NOT FOR ALL
A. Operational Test of the Configuration and of the Conformity
ACTION
RESULT
NOTE: The steps that follow are applicable for all Rave systems.
1.On removable Display Unit (DU) 11MH, on the "Login/Welcome" page:
NOTE: The steps that follow are applicable for all Rave systems.
On removable DU 11MH:
  • Touch the "Maintenance" icon.
  • The "Maintenance Mode Login" page comes into view.
2.On removable DU 11MH, on the "Maintenance Mode Login" page:
On removable DU 11MH:

  • Enter the password.

  • Touch the "Enter" icon.
NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system.
  • The "Maintenance Home" page comes into view.
NOTE: The steps that follow are applicable only for Rave Centric system and Rave mixed system.
3.On removable DU 11MH, on the "Maintenance Home" page:
On removable DU 11MH:
  • Touch the hand icon in the bottom right corner of the page.
  • The application selection area comes into view.
4.On removable DU 11MH, on the application selection area:
On removable DU 11MH:
  • Touch the "Configuration" icon.
  • The "Configuration" page comes into view.
5.On removable DU 11MH, on the "Configuration" page:
On removable DU 11MH:
  • Touch the "Edit/Display" icon.
  • The "Edit/Display" page comes into view.
6.On removable DU 11MH, on the "Edit/Display" page:
On removable DU 11MH:
  • Touch the "Display Config" icon.
  • All the seat Display Units (DU) show their configuration information with the seat number.
  • Make sure that all the seat numbers are correct.
7.On removable DU 11MH:
On removable DU 11MH:
  • Touch the "Exit" icon.
NOTE: The steps that follow are applicable for all Rave systems.
  • The "Configuration" page is no longer shown and all seats go back to the "Login/ Welcome" page.
  • The Hot Spares are OFF.
NOTE: The steps that follow are applicable for all Rave systems.
8.On removable DU 11MH:
On removable DU 11MH:
  • Touch the hand icon in the bottom right corner of the page.
  • The application selection area comes into view.
9.On removable DU 11MH, on the application selection area:
On removable DU 11MH:
  • Touch the "Conformity" icon.
  • The "Conformity Application" comes into view.
10.On removable DU 11MH:
On removable DU 11MH:
  • Touch the "Refresh" icon.
  • The Hardware and Software conformity is checked.
  • Make sure that there are no conformity errors on the "Hardware" page and all the entries are green.
11.On removable DU 11MH:
On removable DU 11MH:
  • Touch the "Software" icon.
  • Make sure that there are no conformity errors on the "Software" page and all the entries are green.
12.On removable DU 11MH:
On removable DU 11MH:

  • Touch the "LOPA" button.
  • Make sure that there are no conformity errors on the "LOPA" page and all the seats are green.
5. Close-up
Subtask 23-33-00-860-163-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to the serviceable condition.
   (1) Push the PAX SYS switch on VCC 10MH.
   (2) Make sure that the internal light of the PAX SYS switch goes off.
Subtask 23-33-00-410-084-A ** ON A/C NOT FOR ALL
B. Close Access
   (1) Close the applicable access door(s) to VCC 10MH.
   (2) Make sure that the work area is clean and clear of tools and other items.
Subtask 23-33-00-862-080-A ** ON A/C NOT FOR ALL
C. De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
[Rev.10 from 2021] 2026.04.01 05:24:47 UTC
"Aviabrain" 2025