Operational Test of the FCU Lighting
TASK 22-10-00-710-004-A
Operational Test of the FCU Lighting
To do a check of the integral lighting and the window lighting of the FCU.
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 22-10-00-861-053-A Subtask 22-10-00-865-053-A
Subtask 22-10-00-710-054-A
Subtask 22-10-00-862-053-A
[Rev.10 from 2021]
2026.04.01 05:15:25 UTC
Operational Test of the FCU Lighting
WARNING:
MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.
ZONE: 210
1. Reason for the JobTo do a check of the integral lighting and the window lighting of the FCU.
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
Subtask 22-10-00-861-053-A Subtask 22-10-00-865-053-A
B. Make sure that this(these) circuit breaker(s) is(are) closed:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | AUTO FLT/FCU/1 | 9CA1 | B05 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | AUTO FLT/FCU/1 | 9CA1 | H11 |
| ** ON A/C ALL | |||
| 121VU | AUTO FLT/FCU/2 | 9CA2 | M21 |
| 122VU | LIGHTING/INSTL LT/GLARE/SHLD | 5LF | Y05 |
Subtask 22-10-00-710-054-A
A. Do this test:
5. Close-up| ACTION | RESULT |
|---|---|
| 1.On the glareshield, below the FCU: | On the FCU: |
| Set the two potentiometers to their left stop. |
|
| 2.Set the left potentiometer to the right stop. |
|
| 3.Set the right potentiometer to the right stop. |
|
| 4.Set the two potentiometers to the left stop. |
|
Subtask 22-10-00-862-053-A