W DOC AIRBUS | AMM A320F

57-20 OUTER WING

    57-20-00 OUTER WING

  • PB.001 OUTER WING - DESCRIPTION AND OPERATION
  • PB.601 OUTER WING - INSPECTION/CHECK
    • 57-20-00-200-001-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin, Upper and Lower Surfaces, around Access Door Cutouts in Rib Bay 2-3 and Rib Bay 6-7
    • 57-20-00-200-032-A [10]
      Special Detailed Inspection (HFEC) of Outer Wing, Bottom Skin, Upper and Lower Surfaces, Around Access Door Cutouts in Rib Bay 2-3 and Rib Bay 6-7
    • 57-20-00-200-002-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Fuel Pump Apertures and Adjacent Holes between Rib 1 and Rib 2
    • 57-20-00-220-001-A [10]
      Detailed Inspection of Outer Wing, Top Skin Upper Surface at Attachment to Front Spar and Rear Spar, between RIB 1 and RIB 8
    • 57-20-00-200-003-A [10]
      Detailed Inspection of Outer Wing, Front Spar, Aft Face, Upper and Lower Root Joint Fittings
    • 57-20-00-200-004-A [10]
      Detailed Inspection of Outer Wing, Front Spar Aft Face, Between Rib 1 and Rib 8, Excluding the Area Inside the Dry Bay
    • 57-20-00-200-005-A [10]
      Detailed Inspection of Outer Wing, Rear Spar, Aft Face, Between RIB 1 and Gear Support RIB 5, including Rear Spar Angle
    • 57-20-00-200-006-A [10]
      Special Detailed Inspection (Endoscope) of the Outer-Wing-Rear-Spar Aft-Face Spar-Joint-Plate at RIB6
    • 57-20-00-200-007-A [10]
      Detailed Inspection of Outer Wing, Rear Spar Forward Face, Upper and Lower Root Joint Fittings
    • 57-20-00-200-008-A [10]
      Detailed Inspection of Outer Wing, Rear Spar Forward Face, between Rib 1 and Rib 8, Including the Region of the Joint at Rib 6 and Top and Bottom Flanges
    • 57-20-00-200-010-A [10]
      Detailed Inspection of Outer Wing, Top Skin Stringers, Between Rib 1 and Rib 8, including Runouts and Air Transfer Holes, Stringer Joints, and Butt Strap, at Stringer 11, excluding the Area Inside the Dry Bay
    • 57-20-00-200-010-B [10]
      Detailed Inspection of Outer Wing, Top Skin Stringers, Between Rib 1 and Rib 8, including Runouts and Air Transfer Holes, Stringer Joints, and Butt Strap, at Stringer 11, excluding the Area Inside the Dry Bay
    • 57-20-00-200-011-A [10]
      Detailed Inspection of the Outer Wing Top-Skin Lower Surface Pylon Reinforcing-Plate
    • 57-20-00-200-014-A [10]
      Detailed Inspection of Outer Wing, RIB 5, Aft of Bolted Panel
    • 57-20-00-200-015-A [10]
      Detailed Inspection of Outer Wing, RIB5 and RIB6 at Skin Attachments (including Cleats), Spar-attachments, Access-cutout Surrounds ...
    • 57-20-00-200-017-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Attachment to Front Spar, between RIB1 and RIB7, excluding area covered by Pylon ....
    • 57-20-00-200-020-A [10]
      Detailed Inspection of the Outer Wing, Bottom Skin Lower Surface at Attachment to Rear Spar, between RIB1 and RIB8, excluding areas covered by....
    • 57-20-00-200-021-A [10]
      Special Detailed Inspection (X-RAY) of the Outer Wing Bottom Skin Forward of the Rear Spar in area masked by MLG Reinforcing Plate including Attachment ....
    • 57-20-00-200-022-A [10]
      Detailed Inspection of Outer Wing, Bottom-Skin Lower Surface, Forward of Rear Spar in Area Covered by Flap Track 2 Fairings, including Attachment ....
    • 57-20-00-200-023-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Runouts of Stringer 2 (Rib Bay 5-6), Stringer 9 (Rib Bays 2-3 and 6-7), Stringer 10 ...
    • 57-20-00-200-024-A [10]
      Special Detailed Inspection (HFEC) of Outer Wing, Bottom Skin, Lower Surface around Aft Pylon Attachment Fitting Cutout
    • 57-20-00-200-025-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Root Joint Fittings on Stringer 8 and Stringer 11
    • 57-20-00-200-026-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Stringers, between Rib 1 and Rib 8, including Drain Holes in Stringers and Butt Strap at Stringer 8 and Stringer 11, excluding the Area inside the Dry Bay
    • 57-20-00-220-003-A [10]
      Detailed Inspection of Outer Wing, Fixed Trailing Edge, Rear Spar Aft Face, between Gear Support Rib 5 and Rib 8
    • 57-20-00-220-004-A [10]
      Detailed Inspection of Outer Wing, Front Spar Forward Face, between Rib 1 and Rib 8, including Vicinity of Cutouts for Slat Tracks 1, 2, 3 and 4
    • 57-20-00-200-031-A [10]
      Detailed Visual Inspection of Outer Wing Bottom Skin, Lower Surface in the Area Covered by Fuel Pump Wiring-Harness Fairings
    • 57-20-00-210-003-A [10]
      General Visual Inspection of Outer Wing, Bottom Skin Lower Surface MLG Reinforcing Plate
    • 57-20-00-210-004-A [10]
      General Visual Inspection of Outer Wing, Bottom Skin Lower Surface Spanwise Skin Joints at Stringer 8 and Stringer 11, between Rib 1 and Rib 8, ...
    • 57-20-00-210-005-A [10]
      General Visual Inspection of Outer Wing, Bottom Skin, Lower Surface at Attachment to Ribs and Stringers, in Area covered by Pylon Fairing
    • 57-20-00-210-006-A [10]
      General Visual Inspection of Outer Wing, Bottom Skin, Lower Surface at Drain Holes for Track Cans 1, 2, 3 and 4 (Rib Bays 1-2, 2-3, 4-5 and 5-6) ...
    • 57-20-00-210-007-A [10]
      General Visual Inspection of Outer Wing, Bottom Skin, Lower Surface at Attachment to Ribs and Stringers (Excluding Stringer 8 and Stringer 11) ...
    • 57-20-00-220-005-A [10]
      Special Detailed Inspection of Outer Wing, Bottom Skin Stringers, between Rib 1 and Rib 8, Including Drain Holes In Stringers and Butt Strap at Stringer 8 ...
    • 57-20-00-220-006-A [10]
      Special Detailed Inspection of Outer Wing, Top Skin Lower Surface, including Stringers and Butt Strap, between Rib 1 and Rib 8
    • 57-20-00-220-007-A [10]
      Special Detailed Inspection of Outer Wing, Bottom Skin Upper Surface, including Stringers and Butt Straps, between Rib 1 and Rib 8
    • 57-20-00-220-008-A [10]
      Special Detailed Inspection of Outer Wing, Front Spar Aft Face, between Rib 1 and Rib 8
    • 57-20-00-220-009-A [10]
      Special Detailed Inspection of Outer Wing, Top Skin Stringers, Between Rib 1 and Rib 8, including Runouts and Air Transfer Holes and Butt Strap at ...
    • 57-20-00-220-010-A [10]
      Special Detailed Inspection of Outer Wing, Rib 5 and Rib 6 at Skin Attachments (Including Cleats), Spar Attachments, Access Cutout Surrounds and in region ...
    • 57-20-00-200-034-A [10]
      Detailed Inspection of Outer Wing, Dry Bay Area
    • 57-20-00-220-011-A [10]
      Special Detailed Inspection (Endoscope) of Outer Wing, Dry Bay Area
    • 57-20-00-220-802-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin, Lower Surface at Attachment to Ribs and Stringers (Excluding Stringers 8 and 11), between Rib 1 and Rib 8 ...
    • 57-20-00-210-802-A [10]
      General Visual Inspection of Outer Wing, Top Skin, Upper Surface at Attachments to Ribs and Stringers Between RIB 1 and RIB 8 from Front Spar to Rear Spar
    • 57-20-00-220-805-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin, Lower Surface at Holes Adjacent to Fuel Pump Apertures between RIB 1 and RIB 2
    • 57-20-00-280-801-A [10]
      Special Detailed Inspection of Outer Wing, Rear Spar Forward Face, at the Attachment Holes of Gear Support Rib 5, MLG Forward Pintle Fitting and Retraction Jack Fitting
    • 57-20-00-220-806-A [10]
      Detailed Inspection of Outer Wing, Top Skin Stringers, Inboard and Outboard of Ribs 4, 5 and 6 at Attachment to Cleats Including Aft Web Face, Forward.....
    • 57-20-00-220-807-A [10]
      Detailed Inspection of Outer Wing, Top Skin, Upper Surface at Attachments to Ribs and Stringers between RIB 1 and RIB 8 from Front Spar to Rear Spar
    • 57-20-00-280-803-A [10]
      Special Detailed Inspection (HFEC and US) of Outer Wing, Bottom Skin Lower Surface at Fuel Pump Apertures and Adjacent Holes between Rib 1 and Rib 2
    • 57-20-00-280-804-A [10]
      Special Detailed Inspection (X-Ray) of Outer Wing, Bottom Skin masked by Pylon Reinforcing Plate
    • 57-20-00-220-810-A [10]
      Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Attachment to Rib 2 between Stringers 8 and 11
    • 57-20-00-220-812-A [10]
      DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN LOWER SURFACE SPANWISE SKIN JOINTS AT STRINGER 8 AND STRINGER 11, BETWEEN RIB 1 AND RIB 8, EXCLUDING.....
    • 57-20-00-200-009-A [8]
      Detailed Inspection of Outer Wing, Top-Skin Stringer Crown Fittings at Root Joint, from Front Spar to Rear Spar
    • 57-20-00-200-013-A [8]
      Detailed Inspection of Outer Wing Ribs, Outboard Face of RIB2, RIB3 and RIB4 at Skin Attachments (including Cleats), Spar Attachments, and in Region of ....
    • 57-20-00-200-016-A [8]
      Detailed Inspection of Outer Wing, RIB7 and RIB8 and Pylon Rear Fitting, excluding Pick-Up Lug
    • 57-20-00-200-019-A [8]
      Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Front Spar masked by Pylon Fairing and Visible Portion of Pylon Reinforcing Plate
    • 57-20-00-200-027-A [8]
      Special Detailed Inspection (HFEC) of Outer Wing, Bottom Skin Lower Surface, Hot Fuel-Recirculation Hole at Rib-bay 7-8, between Stringer 4 and Stringer 5
    • 57-20-00-220-804-A [8]
      Detailed Inspection of Outer Wing, Bottom Skin, Lower Surface Attachment to Rear Spar in Area Covered by Pylon Fairing
    • 57-20-00-280-802-A [8]
      Special Detailed Inspection (US) of Outer Wing, Rear-Spar Forward Face, Between RIB 1 and RIB 8, Including the Region of the Joint at RIB 6 and Top ...
    • 57-20-00-210-803-A [8]
      General Visual Inspection of Outer Wing, Upper Surface Skin Joint at Stringer 11 between RIB 1 and RIB 8
    • 57-20-00-220-811-A [8]
      DETAILED INSPECTION OF OUTER WING, BOTTOM SKIN LOWER SURFACE AT ATTACHMENT TO RIBS AND STRINGERS, IN AREA COVERED BY PYLON FAIRING
    • 57-20-00-280-806-A [8]
      Special Detailed Inspection of Outer Wing, Bottom Skin Lower Surface at Attachment to Rib 2 between Stringers 8 and 11
"WTRUIB" 2025