20-28 ELECTRICAL BONDING

20-28-00 ELECTRICAL BONDING

PB.201 ELECTRICAL BONDING - MAINTENANCE PRACTICES
- 20-28-00-912-802-A [10]
  Electrical Bonding - General Maintenance Procedure
- 20-28-00-912-803-A [10]
  Bonding Surface Preparation
- 20-28-00-912-804-A [10]
  Bonding Point Temporary Protection
- 20-28-00-912-805-A [10]
  Assembly of Components for Bonding
- 20-28-00-912-806-A [10]
  Bonding Final Protection
PB.501 ELECTRICAL BONDING - ADJUSTMENT/TEST
- 20-28-00-869-002-A [10]
  Table of the Maximum Permitted Resistance-Values
- 20-28-00-720-001-A [10]
  Check of the Electrical Bonding of the Different Components (but not Fluid Systems and Components Installed on Composite Materials) with a Millivoltmeter
- 20-28-00-720-005-A [10]
  Check of the Electrical Bonding of the Different Components (but not the Fluid Systems and Components Installed on Composite materials)
- 20-28-00-720-006-A [10]
  Check of the Electrical Bonding of the Fluid Systems
- 20-28-00-720-008-A [10]
  Check of the Electrical Bonding of the Different Components Installed on Composite Materials
- 20-28-00-720-010-A [10]
  Check of the Electrical Bonding of External Composite Panels with a Resistivity - Test Set
- 20-28-00-720-010-A-01 [10]
  Check of the Electrical Bonding of Antenna Fairing (without Non-Conductive Finish paint) with a Megohmmeter
- 20-28-00-720-010-A-02 [10]
  Check of the Electrical Bonding of Nose Radome with a Megohmmeter
- 20-28-00-720-011-A [10]
  Measurement of the Surface Electrical Resistance of External Composite Panels with a Resistivity Test Set
- 20-28-00-720-011-A-01 [10]
  Measurement of the surface Electrical Resistance of External Composite Panels (without Non-Conductive Finish Paint) with Electrical Conductive Tape
- 20-28-00-720-011-A-02 [10]
  Measurement of the Surface Electrical Resistance of External Composite Panels (without Non-Conductive Finish Paint) with Probes
- 20-28-00-720-012-A [10]
  Check of the Aircraft Electrical Grounding
- 20-28-00-720-014-A [10]
  Loop Impedance Test
- 20-28-00-720-802-A [10]
  Check of the Electrical Bonding of an External Composite Panel from a Dimple Washer with a Milliohmmeter
PB.601 ELECTRICAL BONDING - INSPECTION/CHECK
- 20-28-00-200-001-A [10]
  Detailed Inspection of Bonding Leads on Access Panels, Doors and Movable Surfaces