Removal of the Window from the Emergency Exit Door - Doors 2/3

TASK 56-31-15-000-001-A
Removal of the Window from the Emergency Exit Door - Doors 2/3

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)
No specific	1	GLOVES - COTTON, LINT-FREE, CLEAN

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
835CZ, 845CZ
833CZ, 834CZ, 843CZ, 844CZ

D. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-47-000-004-A	Removal of the Door Frame Linings of the LH FWD Emergency Exit Door, zone 231
TASK 25-23-47-000-009-A	Removal of the Door Frame Linings of the Right Forward Emergency Exit Door from Zone 232
TASK 25-23-47-000-010-A	Removal of the Door Frame Linings of the Left/Right Aft Emergency Exit Doors from Zones 251/252
TASK 52-22-00-010-001-A	Opening of the Emergency Exit Doors from the Passenger Compartment
TASK 52-22-00-010-002-A	Opening of the Emergency Exit Doors from the Outside
Window - Emergency Exit Door ** ON A/C NOT FOR ALL
Window - Emergency Exit Door ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 56-31-15-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT) in position at the door you will work from, zone 231 (232) or 251 (252).
(2) Open the emergency exit door (Ref. AMM TASK 52-22-00-010-001) or (Ref. AMM TASK 52-22-00-010-002).
(3) Remove the door lining panel 833CZ (Ref. AMM TASK 25-23-47-000-004) or 843CZ (Ref. AMM TASK 25-23-47-000-009) or 834CZ 844CZ, (Ref. AMM TASK 25-23-47-000-010).

Subtask 56-31-15-010-050-B ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT) in position at zone 251 (252).
(2) Open the applicable emergency exit door (Ref. AMM TASK 52-22-00-010-001) or (Ref. AMM TASK 52-22-00-010-002).
(3) Remove applicable door-lining panel 835CZ or 845CZ (Ref. AMM TASK 25-23-47-000-010).

4. Procedure
Subtask 56-31-15-020-050-A ** ON A/C NOT FOR ALL

A. Remove the window.
(1) Remove the retainer attach screws (1), the washers (2) and the retainer (3).

NOTE: Do not damage the protective surfaces of the retainer.

(2) Remove the window assembly (4) from the window frame (5).

NOTE: You must wear GLOVES - COTTON, LINT-FREE, CLEAN when you touch the window panes, components and assemblies.

(3) If you must disassemble the window assembly (4), you must do the subsequent:
(a) Remove the outer pane (6) from the rubber seal (7).
(b) Remove the inner pane (8) from the rubber seal (7).

NOTE: Put the window panes on a soft, Textile-Lint free Cotton - (Material No.14SBA1) .

[Rev.10 from 2021] 2026.04.01 02:08:03 UTC