Repair of the Damaged Area of the Adhesive Tape

TASK 53-12-00-300-001-A
Repair of the Damaged Area of the Adhesive Tape

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05TKB1)	Adhesive Tape-Electrical Insulation Glass Cloth -
(Material No.08BAA9)	Non Aqueous Cleaner-General - -

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 53-12-11-000-001-A	Removal of the Cockpit Floor Panels from FR1 thru FR12
TASK 53-12-11-400-001-A	Installation of the Cockpit Floor Panels from FR1 thru FR12
TASK 53-12-12-000-001-A	Removal of the Cabin Floor Panels from FR12 thru FR24
TASK 53-12-12-400-001-A	Installation of the Cabin Floor Panels from FR12 thru FR24
TASK 53-12-13-000-001-A	Removal of the avionics compartment floor panels
TASK 53-12-13-400-001-A	Installation of the avionics compartment floor panels
Repair of the Damaged Area of the Adhesive Tape

3. Job Set-up
Subtask 53-12-00-941-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position.
(2) Open the passenger/crew door (Ref. AMM TASK 52-10-00-010-001).

Subtask 53-12-00-020-050-A ** ON A/C NOT FOR ALL

B. Removal of the Panel
(1) Remove the damaged panel (Ref. AMM TASK 53-12-11-000-001) or (Ref. AMM TASK 53-12-12-000-001) or (Ref. AMM TASK 53-12-13-000-001).

4. Procedure
Subtask 53-12-00-350-050-A ** ON A/C NOT FOR ALL

A. Repair Procedure

Repair of the Damaged Area of the Adhesive Tape ** ON A/C NOT FOR ALL

(1) Cut out the damaged area of the corrosion-protection adhesive tape of the floor panel edge.
(2) Clean and degrease the damaged area with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-General - - (Material No.08BAA9) .
(3) Prepare Adhesive Tape-Electrical Insulation Glass Cloth - (Material No.05TKB1) (1) for the cutout limits.
(4) Apply Adhesive Tape-Electrical Insulation Glass Cloth - (Material No.05TKB1) (1) to the damaged area.

5. Close-up
Subtask 53-12-00-420-050-A ** ON A/C NOT FOR ALL

A. Installation of the Panel
(1) Install the repaired panel (Ref. AMM TASK 53-12-11-400-001) or (Ref. AMM TASK 53-12-12-400-001) or (Ref. AMM TASK 53-12-13-400-001).

Subtask 53-12-00-942-050-A ** ON A/C NOT FOR ALL

B. Close Access
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Close the passenger/crew door (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 12:47:33 UTC