Installation of the Printer

TASK 31-35-22-400-001-A
Installation of the Printer

ZONE: 210
FIN: 4TW

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-41-00-861-002-A	Energize the Aircraft Electrical Circuits from the External Power
TASK 24-41-00-861-002-A-01	Energize the Aircraft Electrical Circuits from the APU
TASK 24-41-00-861-002-A-02	Energize the Aircraft Electrical Circuits from Engine 1(2)
TASK 31-35-00-710-001-A	Operational Test of the Printer

3. Job Set-up
Subtask 31-35-22-860-053-A

A. Make sure that the ground service network is energized (Ref. AMM TASK 24-41-00-861-002).

Subtask 31-35-22-865-051-A

B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J21
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J44

4. Procedure
Subtask 31-35-22-420-050-A

A. Installation of the Printer
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the blanking caps from the connectors (3) and (4).
(4) Make sure that the connectors (3) and (4) are in the correct condition.
(5) Connect the connector (4) to the receptacle (3).
(6) Install the printer (2) in its housing (5).
(7) Make sure that the printer (2) is in the correct position.
(8) Tighten the four quarter-turn fasteners (1).

Subtask 31-35-22-865-052-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J21
** ON A/C NOT FOR ALL
121VU	PTR/SPLY	6TW	J44

Subtask 31-35-22-710-051-A

C. Do the operational test of the Printer (Ref. AMM TASK 31-35-00-710-001)

5. Close-up
Subtask 31-35-22-860-054-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 04:26:41 UTC