DOC AIRBUS | AMM A320FRemove the Emergency Locator Transmitter (ELT) for In-shop Test (Battery Check and Functional Check)
TASK 25-65-00-720-001-A
Remove the Emergency Locator Transmitter (ELT) for In-shop Test (Battery Check and Functional Check)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-65-00-861-052-A ** ON A/C NOT FOR ALL Subtask 25-65-00-861-052-J ** ON A/C NOT FOR ALL Subtask 25-65-00-861-052-O ** ON A/C NOT FOR ALL Subtask 25-65-00-010-053-A ** ON A/C NOT FOR ALL
Subtask 25-65-00-720-050-A ** ON A/C NOT FOR ALL
Subtask 25-65-00-410-054-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:41:07 UTC
Remove the Emergency Locator Transmitter (ELT) for In-shop Test (Battery Check and Functional Check)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 25-65-32-000-001-A | Removal of the Portable Emergency Locator Transmitter (ELT) |
| TASK 25-65-32-400-001-A | Installation of the Portable Emergency Locator Transmitter (ELT) |
| TASK 25-65-00-00 | MISCELLANEOUS EMERGENCY EQUIPMENT - DESCRIPTION AND OPERATION |
ELT - Component LocationSubtask 25-65-00-861-052-A ** ON A/C NOT FOR ALL Subtask 25-65-00-861-052-J ** ON A/C NOT FOR ALL Subtask 25-65-00-861-052-O ** ON A/C NOT FOR ALL Subtask 25-65-00-010-053-A ** ON A/C NOT FOR ALL
B. Get Access
(1) For the location of the ELT, refer to Para. Component Location (Ref. AMM D/O 25-65-00-00).
(2) Open the door(s)/access panel(s) of the stowage compartment(s).
(3) If necessary, release/open the strap/clamp.
(4) Remove the ELT(s) from the stowage compartment(s).
Subtask 25-65-00-010-053-J ** ON A/C NOT FOR ALL Subtask 25-65-00-010-053-O ** ON A/C NOT FOR ALL (1) For the location of the ELT, refer to Para. Component Location (Ref. AMM D/O 25-65-00-00).
(2) Open the door(s)/access panel(s) of the stowage compartment(s).
(3) If necessary, release/open the strap/clamp.
(4) Remove the ELT(s) from the stowage compartment(s).
B. Get Access
(1) Open the door/access panel of the stowage compartment(s).
(3) Remove the ELT(s) from the stowage compartment(s).
4. Procedure(1) Open the door/access panel of the stowage compartment(s).
NOTE: The location of the ELT(s) are shown with placards, which are bonded on the outside of the stowage compartment(s).
(2) If necessary release/open the strap/clamp. (3) Remove the ELT(s) from the stowage compartment(s).
Subtask 25-65-00-720-050-A ** ON A/C NOT FOR ALL
A. Workshop Procedure
(1) Send the ELT to the workshop for a visual inspection, a battery check and a functional test.
Subtask 25-65-00-720-050-C ** ON A/C NOT FOR ALL (1) Send the ELT to the workshop for a visual inspection, a battery check and a functional test.
A. Workshop Procedure
(1) Send the ELT to the workshop for a visual inspection, a battery check and a functional test.
Subtask 25-65-00-720-050-O ** ON A/C NOT FOR ALL (1) Send the ELT to the workshop for a visual inspection, a battery check and a functional test.
A. Workshop Procedure
5. Close-upCAUTION:
DO THE TEST IN THE SCREENED ROOM.
IF THE SCREENED ROOM IS NOT AVAILABLE, DO THE TEST DURING THE FIRST FIVE MINUTES AFTER THE HOUR.
(BETWEEN XX.00 HRS AND XX:05 HRS) IF YOU MUST DO THE TEST AT A DIFFERENT TIME, FIRST TELL THE NEAREST AIR TRAFFIC CONTROL FACILITY TO IGNORE THE SIGNAL DURING THE TEST. MAKE SURE THAT THE TEST SIGNAL IS NOT LONGER THAN THREE TONES.
THIS IS TO PREVENT UNWANTED RESCUE OPERATIONS.
(1) Send the ELT to the workshop for a visual inspection, a battery check and a functional test of the ELT.Subtask 25-65-00-410-054-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Do a check of the ELT attachment (strap, clamp, bag) for wear, contamination and environmental degradation. Make sure that the attachment is in a serviceable condition.
(2) Install a serviceable or replacement ELT(s).
(3) Attach/close the strap/clamp.
(4) Close the door(s)/access panel(s) of the stowage compartment(s).
(5) Make sure that the work area is clean and clear of tools and other items.
Subtask 25-65-00-410-054-J ** ON A/C NOT FOR ALL Subtask 25-65-00-410-054-O ** ON A/C NOT FOR ALL (1) Do a check of the ELT attachment (strap, clamp, bag) for wear, contamination and environmental degradation. Make sure that the attachment is in a serviceable condition.
(2) Install a serviceable or replacement ELT(s).
(3) Attach/close the strap/clamp.
(4) Close the door(s)/access panel(s) of the stowage compartment(s).
(5) Make sure that the work area is clean and clear of tools and other items.
A. Close Access
(1) Install a serviceable or replacement ELT(s).
(2) Attach/close the strap/clamp.
(3) Close the door/access panel of the stowage compartment(s).
(4) Make sure that the work area is clean and clear of tools and other items.
Subtask 25-65-00-862-052-A ** ON A/C NOT FOR ALL Subtask 25-65-00-862-052-J ** ON A/C NOT FOR ALL Subtask 25-65-00-862-052-O ** ON A/C NOT FOR ALL (1) Install a serviceable or replacement ELT(s).
(2) Attach/close the strap/clamp.
(3) Close the door/access panel of the stowage compartment(s).
(4) Make sure that the work area is clean and clear of tools and other items.